From: Vitaly Andrianov vitalya@ti.com
Add a new defconfig file for the K2E High Security EVM.
This defconfig is the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
Enables the platform-specific post-processing of FIT-extracted blobs such as Kernel, DTB, and initramfs on TI K2E high-security (HS) devices which will ultimately invokes TI proprietary secure functions that performs secure processing such as blob authentication and decryption.
Signed-off-by: Vitaly Andrianov vitalya@ti.com Signed-off-by: Madan Srinivas madans@ti.com
Cc: Andrew F. Davis afd@ti.com ---
Changes in v2: - Updates k2e_hs_evm_defconfig to reduce the delta seen if one regenerates it using savedefconfig or similar tools.
configs/k2e_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 configs/k2e_hs_evm_defconfig
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig new file mode 100644 index 0000000..fc8f22a --- /dev/null +++ b/configs/k2e_hs_evm_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_TARGET_K2E_EVM=y +CONFIG_TI_SECURE_DEVICE=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" +CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_FIT_IMAGE_POST_PROCESS=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="K2E EVM # " +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_TI_AEMIF=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DM_ETH=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y