Hi Otavio,
On 22/10/2013 01:34, Otavio Salvador wrote:
This patchset adds support for the Future Eletronics 7" WVGA LCD extension board and implements its auto-detection using i2c to check for it's touch controller presence.
The IOMUXC change is included here as it makes both SoC type MUX settings in line to each other and took a while to figure out why it worked with one and failed with another SoC.
Otavio Salvador (4): mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin wandboard: add Future Eletronics 7" WVGA LCD extension board wandboard: Use '0' as bootdelay but interruptable wandboard: Pass 'quiet' bootparam by default
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +- board/wandboard/wandboard.c | 238 ++++++++++++++++++++++++++--- include/configs/wandboard.h | 38 ++++- 3 files changed, 254 insertions(+), 24 deletions(-)
I confess that I hoped that Simon's patches to extract the env from the board configuration file could be merged very soon into mainline, but they are not yet merged, and I am blocking some patches, mostly Otavio's. Again, there is also patches adding new feature as this one for the Future Electronics display, that contains also many additions to CONFIG_EXTRA_ENV_SETTINGS.
I will apply the patch for Future's display - it is much more as only a change to default environment - but I am still confident that we can do in the right way once and I will let the other patches in my queue.
Otavio, this regards your patches: http://patchwork.ozlabs.org/patch/285295/ http://patchwork.ozlabs.org/patch/285296/ http://patchwork.ozlabs.org/patch/285294/
Best regards, Stefano