Add binman_imx_spl and binman_imx_fit labels to nxp-imx8mimage {} and fit {} nodes respectively, so they can be referened in board DTs no matter how deep in the top level binman image description they are. Update current board DTs to use those labels.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Adam Ford aford173@gmail.com Cc: Alper Nebi Yasak alpernebiyasak@gmail.com Cc: Andrejs Cainikovs andrejs.cainikovs@toradex.com Cc: Angus Ainslie angus@akkea.ca Cc: Emanuele Ghidoli emanuele.ghidoli@toradex.com Cc: Fabio Estevam festevam@gmail.com Cc: Francesco Dolcini francesco.dolcini@toradex.com Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Rasmus Villemoes rasmus.villemoes@prevas.dk Cc: Simon Glass sjg@chromium.org Cc: Stefan Eichenberger stefan.eichenberger@toradex.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tom Rini trini@konsulko.com Cc: kernel@puri.sm Cc: u-boot@dh-electronics.com Cc: u-boot@lists.denx.de --- V2: New patch --- arch/arm/dts/imx8mm-u-boot.dtsi | 4 +- .../dts/imx8mm-verdin-wifi-dev-u-boot.dtsi | 8 +- arch/arm/dts/imx8mn-u-boot.dtsi | 4 +- arch/arm/dts/imx8mp-dhcom-u-boot.dtsi | 124 +++++++++--------- arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 26 ++-- arch/arm/dts/imx8mp-u-boot.dtsi | 4 +- arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi | 10 +- arch/arm/dts/imx8mq-u-boot.dtsi | 4 +- 8 files changed, 84 insertions(+), 100 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index 6ab8f66256e..b9b1193823a 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -54,7 +54,7 @@ }; #endif
- nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <1>; @@ -98,7 +98,7 @@ }; };
- fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi index 90183aff8bc..183de46f66a 100644 --- a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi @@ -35,12 +35,8 @@ bootph-pre-ram; };
-&binman { - section { - fit { - offset = <0x5fc00>; - }; - }; +&binman_imx_fit { + offset = <0x5fc00>; };
&gpio1 { diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index ba9967dbe4a..c9fb33cfb73 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -103,7 +103,7 @@ }; #endif
- nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <2>; @@ -169,7 +169,7 @@ }; };
- fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi index cb37e28f28f..c065fb82994 100644 --- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi @@ -135,73 +135,69 @@ bootph-pre-ram; };
-&binman { - section { - fit { - images { - fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast { - description = "imx8mp-dhcom-som-overlay-eth1xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast { - description = "imx8mp-dhcom-som-overlay-eth2xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast { - description = "imx8mp-dhcom-pdk-overlay-eth2xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-som-overlay-rev100 { - description = "imx8mp-dhcom-som-overlay-rev100"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-rev100.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 { - description = "imx8mp-dhcom-pdk3-overlay-rev100"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo"; - }; - }; +&binman_imx_fit { + images { + fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast { + description = "imx8mp-dhcom-som-overlay-eth1xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo"; }; + }; + + fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast { + description = "imx8mp-dhcom-som-overlay-eth2xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo"; + }; + }; + + fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast { + description = "imx8mp-dhcom-pdk-overlay-eth2xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo"; + }; + };
- configurations { - default = "@config-DEFAULT-SEQ"; - - @config-SEQ { - fdt = "fdt-1", - "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast", - "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast", - "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast", - "fdt-dto-imx8mp-dhcom-som-overlay-rev100", - "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100"; - }; + fdt-dto-imx8mp-dhcom-som-overlay-rev100 { + description = "imx8mp-dhcom-som-overlay-rev100"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-rev100.dtbo"; + }; + }; + + fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 { + description = "imx8mp-dhcom-pdk3-overlay-rev100"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo"; }; }; }; + + configurations { + default = "@config-DEFAULT-SEQ"; + + @config-SEQ { + fdt = "fdt-1", + "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast", + "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast", + "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast", + "fdt-dto-imx8mp-dhcom-som-overlay-rev100", + "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100"; + }; + }; }; diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi index aff5dcf615d..21eff6d6ad4 100644 --- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi @@ -135,21 +135,17 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>; };
-&binman { - section { - fit { - images { - fip { - description = "Trusted Firmware FIP"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - load = <0x40310000>; - - fip_blob: blob-ext{ - filename = "fip.bin"; - }; - }; +&binman_imx_fit { + images { + fip { + description = "Trusted Firmware FIP"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x40310000>; + + fip_blob: blob-ext{ + filename = "fip.bin"; }; }; }; diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index c4c1a177102..8b5ac3faf1c 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -86,7 +86,7 @@ section { pad-byte = <0x00>;
- nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <2>; @@ -129,7 +129,7 @@ }; };
- fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi index 1a4568dac65..98da015a444 100644 --- a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi @@ -10,14 +10,10 @@ bootph-pre-ram; };
-&binman { +&binman_imx_spl { section { - nxp-imx8mimage { - section { - signed-hdmi-imx8m { - filename = "signed_dp_imx8m.bin"; - }; - }; + signed-hdmi-imx8m { + filename = "signed_dp_imx8m.bin"; }; }; }; diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi index 48dbe94f0c4..72da674d245 100644 --- a/arch/arm/dts/imx8mq-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-u-boot.dtsi @@ -38,7 +38,7 @@ section { pad-byte = <0x00>;
- nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <1>; @@ -87,7 +87,7 @@ }; };
- fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;