From: Nathan Barrett-Morrison nathan.morrison@timesys.com
Co-developed-by: Greg Malysa greg.malysa@timesys.com Signed-off-by: Greg Malysa greg.malysa@timesys.com Co-developed-by: Ian Roberts ian.roberts@timesys.com Signed-off-by: Ian Roberts ian.roberts@timesys.com Signed-off-by: Vasileios Bimpikas vasileios.bimpikas@analog.com Signed-off-by: Utsav Agarwal utsav.agarwal@analog.com Signed-off-by: Arturs Artamonovs arturs.artamonovs@analog.com Signed-off-by: Nathan Barrett-Morrison nathan.morrison@timesys.com ---
(no changes since v1)
MAINTAINERS | 1 + drivers/serial/Makefile | 1 + drivers/serial/serial_adi_uart4.c | 225 ++++++++++++++++++++++++++++++ 3 files changed, 227 insertions(+) create mode 100644 drivers/serial/serial_adi_uart4.c
diff --git a/MAINTAINERS b/MAINTAINERS index 78e3d59f96..74310c8f9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -610,6 +610,7 @@ T: git https://github.com/analogdevicesinc/lnxdsp-u-boot F: arch/arm/include/asm/arch-adi/ F: arch/arm/mach-sc5xx/ F: drivers/clk/adi/ +F: drivers/serial/serial_adi_uart4.c F: include/env/adi/
ARM SNAPDRAGON diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 403ab1ded6..dbe598b740 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -65,3 +65,4 @@ obj-$(CONFIG_S5P4418_PL011_SERIAL) += serial_s5p4418_pl011.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o endif +obj-$(CONFIG_UART4_SERIAL) += serial_adi_uart4.o diff --git a/drivers/serial/serial_adi_uart4.c b/drivers/serial/serial_adi_uart4.c new file mode 100644 index 0000000000..45f8315d0a --- /dev/null +++ b/drivers/serial/serial_adi_uart4.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2022 - Analog Devices, Inc. + * + * Written and/or maintained by Timesys Corporation + * + * Converted to driver model by Nathan Barrett-Morrison + * + * Contact: Nathan Barrett-Morrison nathan.morrison@timesys.com + * Contact: Greg Malysa greg.malysa@timesys.com + * + */ + +#include <clk.h> +#include <dm.h> +#include <serial.h> +#include <asm/io.h> +#include <dm/device_compat.h> +#include <linux/bitops.h> + +/* + * UART4 Masks + */ + +/* UART_CONTROL */ +#define UEN BIT(0) +#define LOOP_ENA BIT(1) +#define UMOD (3 << 4) +#define UMOD_UART (0 << 4) +#define UMOD_MDB BIT(4) +#define UMOD_IRDA BIT(4) +#define WLS (3 << 8) +#define WLS_5 (0 << 8) +#define WLS_6 BIT(8) +#define WLS_7 (2 << 8) +#define WLS_8 (3 << 8) +#define STB BIT(12) +#define STBH BIT(13) +#define PEN BIT(14) +#define EPS BIT(15) +#define STP BIT(16) +#define FPE BIT(17) +#define FFE BIT(18) +#define SB BIT(19) +#define FCPOL BIT(22) +#define RPOLC BIT(23) +#define TPOLC BIT(24) +#define MRTS BIT(25) +#define XOFF BIT(26) +#define ARTS BIT(27) +#define ACTS BIT(28) +#define RFIT BIT(29) +#define RFRT BIT(30) + +/* UART_STATUS */ +#define DR BIT(0) +#define OE BIT(1) +#define PE BIT(2) +#define FE BIT(3) +#define BI BIT(4) +#define THRE BIT(5) +#define TEMT BIT(7) +#define TFI BIT(8) +#define ASTKY BIT(9) +#define ADDR BIT(10) +#define RO BIT(11) +#define SCTS BIT(12) +#define CTS BIT(16) +#define RFCS BIT(17) + +/* UART_EMASK */ +#define ERBFI BIT(0) +#define ETBEI BIT(1) +#define ELSI BIT(2) +#define EDSSI BIT(3) +#define EDTPTI BIT(4) +#define ETFI BIT(5) +#define ERFCI BIT(6) +#define EAWI BIT(7) +#define ERXS BIT(8) +#define ETXS BIT(9) + +DECLARE_GLOBAL_DATA_PTR; + +struct uart4_reg { + u32 revid; + u32 control; + u32 status; + u32 scr; + u32 clock; + u32 emask; + u32 emaskst; + u32 emaskcl; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv_cnt; + u32 rxdiv_cnt; +}; + +struct adi_uart4_platdata { + // Hardware registers + struct uart4_reg *regs; + + // Enable divide-by-one baud rate setting + bool edbo; +}; + +static int adi_uart4_set_brg(struct udevice *dev, int baudrate) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + struct uart4_reg *regs = plat->regs; + u32 divisor, uart_base_clk_rate; + struct clk uart_base_clk; + + if (clk_get_by_index(dev, 0, &uart_base_clk)) { + dev_err(dev, "Could not get UART base clock\n"); + return -1; + } + + uart_base_clk_rate = clk_get_rate(&uart_base_clk); + + if (plat->edbo) { + u16 divisor16 = (uart_base_clk_rate + (baudrate / 2)) / baudrate; + + divisor = divisor16 | BIT(31); + } else { + // Divisor is only 16 bits + divisor = 0x0000ffff & ((uart_base_clk_rate + (baudrate * 8)) / (baudrate * 16)); + } + + writel(divisor, ®s->clock); + return 0; +} + +static int adi_uart4_pending(struct udevice *dev, bool input) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + struct uart4_reg *regs = plat->regs; + + if (input) + return (readl(®s->status) & DR) ? 1 : 0; + else + return (readl(®s->status) & THRE) ? 0 : 1; +} + +static int adi_uart4_getc(struct udevice *dev) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + struct uart4_reg *regs = plat->regs; + int uart_rbr_val; + + if (!adi_uart4_pending(dev, true)) + return -EAGAIN; + + uart_rbr_val = readl(®s->rbr); + writel(-1, ®s->status); + + return uart_rbr_val; +} + +static int adi_uart4_putc(struct udevice *dev, const char ch) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + struct uart4_reg *regs = plat->regs; + + if (adi_uart4_pending(dev, false)) + return -EAGAIN; + + writel(ch, ®s->thr); + return 0; +} + +static const struct dm_serial_ops adi_uart4_serial_ops = { + .setbrg = adi_uart4_set_brg, + .getc = adi_uart4_getc, + .putc = adi_uart4_putc, + .pending = adi_uart4_pending, +}; + +static int adi_uart4_of_to_plat(struct udevice *dev) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + fdt_addr_t addr; + + addr = dev_read_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->regs = (struct uart4_reg *)addr; + plat->edbo = dev_read_bool(dev, "adi,enable-edbo"); + + return 0; +} + +static int adi_uart4_probe(struct udevice *dev) +{ + struct adi_uart4_platdata *plat = dev_get_plat(dev); + struct uart4_reg *regs = plat->regs; + + /* always enable UART to 8-bit mode */ + writel(UEN | UMOD_UART | WLS_8, ®s->control); + + writel(-1, ®s->status); + + return 0; +} + +static const struct udevice_id adi_uart4_serial_ids[] = { + { .compatible = "adi,uart4" }, + { } +}; + +U_BOOT_DRIVER(serial_adi_uart4) = { + .name = "serial_adi_uart4", + .id = UCLASS_SERIAL, + .of_match = adi_uart4_serial_ids, + .of_to_plat = adi_uart4_of_to_plat, + .plat_auto = sizeof(struct adi_uart4_platdata), + .probe = adi_uart4_probe, + .ops = &adi_uart4_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +};