On Mon, Sep 23, 2019 at 01:17:40AM +0000, Alexander von Gluck IV wrote:
Hello!
There is no uart output and no video with u-boot master. The board works as expected booting the Asus Armbian image on an SD.
At this point i'd be happy to get some u-boot uart output :-)
-- Alex
uart output works here with the latest master (780a17e814503f71d1b51d578b32bc9c89933183)
U-Boot TPL 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000) Trying to boot from MMC1
U-Boot 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000)
Model: Tinker-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Tinker-RK3288 rockchip_dnl_key_pressed: adc_channel_single_shot fail! Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found EFI removable media binary efi/boot/bootarm.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk dwmmc@ff0c0000.blk... Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 88176 bytes read in 9 ms (9.3 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC
OpenBSD/armv7 BOOTARM 1.6
boot>