Re: [PATCH 2/2] board: visionfive2: configure PHY pad drive strength

On Sun, Jan 28, 2024 at 08:22:48PM +0100, Lukasz Tekieli wrote:

Configure the pad drive strength register for both PHYs. The values correspond to what can be found in the Linux DTS for VisionFive2 v1.3b.

Pad drive strength configuration is required for the phy0 to work correctly with 100Mbit links.

Signed-off-by: Lukasz Tekieli tekieli.lukasz@gmail.com

board/starfive/visionfive2/spl.c | 8 ++++++++ 1 file changed, 8 insertions(+)

Reviewed-by: Leo Yu-Chi Liang ycliang@andestech.com