[PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset

12 Apr 2022


      ...
The FlexSPI NOR boot offset does not require any special handling,
the image_offset is correct in either case (0x1000 for FlexSPI NOR
and 0x8000 for SD/eMMC) and the offset of u-boot.itb from the start
of flash.bin is always 0x58000 on MX8MN/MX8MP, which matches the
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000 in case
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300, which is always the
case on MX8MN/MX8MP.
The CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR is really overloaded in
case of the MX8MN/MX8MP, but fixing that needs additional plumbing.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Fabio Estevam festevam@denx.de
Cc: Peng Fan peng.fan@nxp.com
Cc: Stefano Babic sbabic@denx.de
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset

sbabic＠denx.de