Add support in binman for generating EFI capsules. The capsule parameters can be specified through the capsule binman entry. Also add test cases in binman for testing capsule generation.
Signed-off-by: Sughosh Ganu sughosh.ganu@linaro.org Reviewed-by: Simon Glass sjg@chromium.org --- Changes since V9: None
tools/binman/entries.rst | 64 ++++++++ tools/binman/etype/efi_capsule.py | 143 ++++++++++++++++++ tools/binman/ftest.py | 118 +++++++++++++++ tools/binman/test/311_capsule.dts | 21 +++ tools/binman/test/312_capsule_signed.dts | 23 +++ tools/binman/test/313_capsule_version.dts | 22 +++ tools/binman/test/314_capsule_signed_ver.dts | 24 +++ tools/binman/test/315_capsule_oemflags.dts | 22 +++ tools/binman/test/316_capsule_missing_key.dts | 22 +++ .../binman/test/317_capsule_missing_index.dts | 20 +++ .../binman/test/318_capsule_missing_guid.dts | 19 +++ 11 files changed, 498 insertions(+) create mode 100644 tools/binman/etype/efi_capsule.py create mode 100644 tools/binman/test/311_capsule.dts create mode 100644 tools/binman/test/312_capsule_signed.dts create mode 100644 tools/binman/test/313_capsule_version.dts create mode 100644 tools/binman/test/314_capsule_signed_ver.dts create mode 100644 tools/binman/test/315_capsule_oemflags.dts create mode 100644 tools/binman/test/316_capsule_missing_key.dts create mode 100644 tools/binman/test/317_capsule_missing_index.dts create mode 100644 tools/binman/test/318_capsule_missing_guid.dts
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst index e7dfe6b2a3..801bd94674 100644 --- a/tools/binman/entries.rst +++ b/tools/binman/entries.rst @@ -468,6 +468,70 @@ updating the EC on startup via software sync.
+.. _etype_efi_capsule: + +Entry: capsule: Entry for generating EFI Capsule files +------------------------------------------------------ + +The parameters needed for generation of the capsules can be provided +as properties in the entry. + +Properties / Entry arguments: + - image-index: Unique number for identifying corresponding + payload image. Number between 1 and descriptor count, i.e. + the total number of firmware images that can be updated. Mandatory + property. + - image-guid: Image GUID which will be used for identifying the + updatable image on the board. Mandatory property. + - hardware-instance: Optional number for identifying unique + hardware instance of a device in the system. Default value of 0 + for images where value is not to be used. + - fw-version: Value of image version that can be put on the capsule + through the Firmware Management Protocol(FMP) header. + - monotonic-count: Count used when signing an image. + - private-key: Path to PEM formatted .key private key file. Mandatory + property for generating signed capsules. + - public-key-cert: Path to PEM formatted .crt public key certificate + file. Mandatory property for generating signed capsules. + - oem-flags - OEM flags to be passed through capsule header. + + Since this is a subclass of Entry_section, all properties of the parent + class also apply here. Except for the properties stated as mandatory, the + rest of the properties are optional. + +For more details on the description of the capsule format, and the capsule +update functionality, refer Section 8.5 and Chapter 23 in the `UEFI +specification`_. + +The capsule parameters like image index and image GUID are passed as +properties in the entry. The payload to be used in the capsule is to be +provided as a subnode of the capsule entry. + +A typical capsule entry node would then look something like this:: + + capsule { + type = "efi-capsule"; + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = SANDBOX_UBOOT_IMAGE_GUID; + hardware-instance = <0x0>; + private-key = "path/to/the/private/key"; + public-key-cert = "path/to/the/public-key-cert"; + oem-flags = <0x8000>; + + u-boot { + }; + }; + +In the above example, the capsule payload is the U-Boot image. The +capsule entry would read the contents of the payload and put them +into the capsule. Any external file can also be specified as the +payload using the blob-ext subnode. + +.. _`UEFI specification`: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf + + + .. _etype_encrypted:
Entry: encrypted: Externally built encrypted binary blob diff --git a/tools/binman/etype/efi_capsule.py b/tools/binman/etype/efi_capsule.py new file mode 100644 index 0000000000..006eb630ad --- /dev/null +++ b/tools/binman/etype/efi_capsule.py @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2023 Linaro Limited +# +# Entry-type module for producing a EFI capsule +# + +import os + +from binman.entry import Entry +from binman.etype.section import Entry_section +from dtoc import fdt_util +from u_boot_pylib import tools + +class Entry_efi_capsule(Entry_section): + """Generate EFI capsules + + The parameters needed for generation of the capsules can + be provided as properties in the entry. + + Properties / Entry arguments: + - image-index: Unique number for identifying corresponding + payload image. Number between 1 and descriptor count, i.e. + the total number of firmware images that can be updated. Mandatory + property. + - image-guid: Image GUID which will be used for identifying the + updatable image on the board. Mandatory property. + - hardware-instance: Optional number for identifying unique + hardware instance of a device in the system. Default value of 0 + for images where value is not to be used. + - fw-version: Value of image version that can be put on the capsule + through the Firmware Management Protocol(FMP) header. + - monotonic-count: Count used when signing an image. + - private-key: Path to PEM formatted .key private key file. Mandatory + property for generating signed capsules. + - public-key-cert: Path to PEM formatted .crt public key certificate + file. Mandatory property for generating signed capsules. + - oem-flags - OEM flags to be passed through capsule header. + + Since this is a subclass of Entry_section, all properties of the parent + class also apply here. Except for the properties stated as mandatory, the + rest of the properties are optional. + + For more details on the description of the capsule format, and the capsule + update functionality, refer Section 8.5 and Chapter 23 in the `UEFI + specification`_. + + The capsule parameters like image index and image GUID are passed as + properties in the entry. The payload to be used in the capsule is to be + provided as a subnode of the capsule entry. + + A typical capsule entry node would then look something like this + + capsule { + type = "efi-capsule"; + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = SANDBOX_UBOOT_IMAGE_GUID; + hardware-instance = <0x0>; + private-key = "path/to/the/private/key"; + public-key-cert = "path/to/the/public-key-cert"; + oem-flags = <0x8000>; + + u-boot { + }; + }; + + In the above example, the capsule payload is the U-Boot image. The + capsule entry would read the contents of the payload and put them + into the capsule. Any external file can also be specified as the + payload using the blob-ext subnode. + + .. _`UEFI specification`: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf + """ + def __init__(self, section, etype, node): + super().__init__(section, etype, node) + self.required_props = ['image-index', 'image-guid'] + self.image_index = 0 + self.image_guid = '' + self.hardware_instance = 0 + self.monotonic_count = 0 + self.fw_version = 0 + self.oem_flags = 0 + self.private_key = '' + self.public_key_cert = '' + self.auth = 0 + + def ReadNode(self): + super().ReadNode() + + self.image_index = fdt_util.GetInt(self._node, 'image-index') + self.image_guid = fdt_util.GetString(self._node, 'image-guid') + self.fw_version = fdt_util.GetInt(self._node, 'fw-version') + self.hardware_instance = fdt_util.GetInt(self._node, 'hardware-instance') + self.monotonic_count = fdt_util.GetInt(self._node, 'monotonic-count') + self.oem_flags = fdt_util.GetInt(self._node, 'oem-flags') + + self.private_key = fdt_util.GetString(self._node, 'private-key') + self.public_key_cert = fdt_util.GetString(self._node, 'public-key-cert') + if ((self.private_key and not self.public_key_cert) or (self.public_key_cert and not self.private_key)): + self.Raise('Both private key and public key certificate need to be provided') + elif not (self.private_key and self.public_key_cert): + self.auth = 0 + else: + self.auth = 1 + + def BuildSectionData(self, required): + def get_binman_test_guid(type_str): + TYPE_TO_GUID = { + 'binman-test' : '09d7cf52-0720-4710-91d1-08469b7fe9c8' + } + return TYPE_TO_GUID[type_str] + + private_key = '' + public_key_cert = '' + if self.auth: + if not os.path.isabs(self.private_key): + private_key = tools.get_input_filename(self.private_key) + if not os.path.isabs(self.public_key_cert): + public_key_cert = tools.get_input_filename(self.public_key_cert) + data, payload, uniq = self.collect_contents_to_file( + self._entries.values(), 'capsule_in') + outfile = self._filename if self._filename else 'capsule.%s' % uniq + capsule_fname = tools.get_output_filename(outfile) + guid = self.image_guid + if self.image_guid == "binman-test": + guid = get_binman_test_guid('binman-test') + + ret = self.mkeficapsule.generate_capsule(self.image_index, + guid, + self.hardware_instance, + payload, + capsule_fname, + private_key, + public_key_cert, + self.monotonic_count, + self.fw_version, + self.oem_flags) + if ret is not None: + os.remove(payload) + return tools.read_file(capsule_fname) + + def AddBintools(self, btools): + self.mkeficapsule = self.AddBintool(btools, 'mkeficapsule') diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 1293e9dbf4..8e419645a6 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -48,6 +48,7 @@ U_BOOT_VPL_DATA = b'vpl76543210fedcbazywxyz_' BLOB_DATA = b'89' ME_DATA = b'0abcd' VGA_DATA = b'vga' +EFI_CAPSULE_DATA = b'efi' U_BOOT_DTB_DATA = b'udtb' U_BOOT_SPL_DTB_DATA = b'spldtb' U_BOOT_TPL_DTB_DATA = b'tpldtb' @@ -119,6 +120,11 @@ COMP_BINTOOLS = ['bzip2', 'gzip', 'lz4', 'lzma_alone', 'lzop', 'xz', 'zstd']
TEE_ADDR = 0x5678
+# Firmware Management Protocol(FMP) GUID +FW_MGMT_GUID = 'edd5cb6d2de8444cbda17194199ad92a' +# Image GUID specified in the DTS +CAPSULE_IMAGE_GUID = '52cfd7092007104791d108469b7fe9c8' + class TestFunctional(unittest.TestCase): """Functional tests for binman
@@ -215,6 +221,7 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile('scp.bin', SCP_DATA) TestFunctional._MakeInputFile('rockchip-tpl.bin', ROCKCHIP_TPL_DATA) TestFunctional._MakeInputFile('ti_unsecure.bin', TI_UNSECURE_DATA) + TestFunctional._MakeInputFile('capsule_input.bin', EFI_CAPSULE_DATA)
# Add a few .dtb files for testing TestFunctional._MakeInputFile('%s/test-fdt1.dtb' % TEST_FDT_SUBDIR, @@ -7216,5 +7223,116 @@ fdt fdtmap Extract the devicetree blob from the fdtmap self.assertRegex(err, "Image 'image'.*missing bintools.*: bootgen")
+ def _CheckCapsule(self, data, signed_capsule=False, version_check=False, + capoemflags=False): + fmp_signature = "4d535331" # 'M', 'S', 'S', '1' + fmp_size = "10" + fmp_fw_version = "02" + oemflag = "0080" + + payload_data = EFI_CAPSULE_DATA + + # TODO - Currently, these offsets for capsule fields are hardcoded. + # There are plans to add support to the mkeficapsule tool to dump + # the capsule contents which can then be used for capsule + # verification. + + # Firmware Management Protocol(FMP) GUID - offset(0 - 32) + self.assertEqual(FW_MGMT_GUID, data.hex()[:32]) + # Image GUID - offset(96 - 128) + self.assertEqual(CAPSULE_IMAGE_GUID, data.hex()[96:128]) + + if capoemflags: + # OEM Flags - offset(40 - 44) + self.assertEqual(oemflag, data.hex()[40:44]) + if signed_capsule and version_check: + # FMP header signature - offset(4770 - 4778) + self.assertEqual(fmp_signature, data.hex()[4770:4778]) + # FMP header size - offset(4778 - 4780) + self.assertEqual(fmp_size, data.hex()[4778:4780]) + # firmware version - offset(4786 - 4788) + self.assertEqual(fmp_fw_version, data.hex()[4786:4788]) + # payload offset signed capsule(4802 - 4808) + self.assertEqual(payload_data.hex(), data.hex()[4802:4808]) + elif signed_capsule: + # payload offset signed capsule(4770 - 4776) + self.assertEqual(payload_data.hex(), data.hex()[4770:4776]) + elif version_check: + # FMP header signature - offset(184 - 192) + self.assertEqual(fmp_signature, data.hex()[184:192]) + # FMP header size - offset(192 - 194) + self.assertEqual(fmp_size, data.hex()[192:194]) + # firmware version - offset(200 - 202) + self.assertEqual(fmp_fw_version, data.hex()[200:202]) + # payload offset for non-signed capsule with version header(216 - 222) + self.assertEqual(payload_data.hex(), data.hex()[216:222]) + else: + # payload offset for non-signed capsule with no version header(184 - 190) + self.assertEqual(payload_data.hex(), data.hex()[184:190]) + + def testCapsuleGen(self): + """Test generation of EFI capsule""" + data = self._DoReadFile('311_capsule.dts') + + self._CheckCapsule(data) + + def testSignedCapsuleGen(self): + """Test generation of EFI capsule""" + data = tools.read_file(self.TestFile("key.key")) + self._MakeInputFile("key.key", data) + data = tools.read_file(self.TestFile("key.pem")) + self._MakeInputFile("key.crt", data) + + data = self._DoReadFile('312_capsule_signed.dts') + + self._CheckCapsule(data, signed_capsule=True) + + def testCapsuleGenVersionSupport(self): + """Test generation of EFI capsule with version support""" + data = self._DoReadFile('313_capsule_version.dts') + + self._CheckCapsule(data, version_check=True) + + def testCapsuleGenSignedVer(self): + """Test generation of signed EFI capsule with version information""" + data = tools.read_file(self.TestFile("key.key")) + self._MakeInputFile("key.key", data) + data = tools.read_file(self.TestFile("key.pem")) + self._MakeInputFile("key.crt", data) + + data = self._DoReadFile('314_capsule_signed_ver.dts') + + self._CheckCapsule(data, signed_capsule=True, version_check=True) + + def testCapsuleGenCapOemFlags(self): + """Test generation of EFI capsule with OEM Flags set""" + data = self._DoReadFile('315_capsule_oemflags.dts') + + self._CheckCapsule(data, capoemflags=True) + + def testCapsuleGenKeyMissing(self): + """Test that binman errors out on missing key""" + with self.assertRaises(ValueError) as e: + self._DoReadFile('316_capsule_missing_key.dts') + + self.assertIn("Both private key and public key certificate need to be provided", + str(e.exception)) + + def testCapsuleGenIndexMissing(self): + """Test that binman errors out on missing image index""" + with self.assertRaises(ValueError) as e: + self._DoReadFile('317_capsule_missing_index.dts') + + self.assertIn("entry is missing properties: image-index", + str(e.exception)) + + def testCapsuleGenGuidMissing(self): + """Test that binman errors out on missing image GUID""" + with self.assertRaises(ValueError) as e: + self._DoReadFile('318_capsule_missing_guid.dts') + + self.assertIn("entry is missing properties: image-guid", + str(e.exception)) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/311_capsule.dts b/tools/binman/test/311_capsule.dts new file mode 100644 index 0000000000..8eb4250b14 --- /dev/null +++ b/tools/binman/test/311_capsule.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/312_capsule_signed.dts b/tools/binman/test/312_capsule_signed.dts new file mode 100644 index 0000000000..d1c76e269c --- /dev/null +++ b/tools/binman/test/312_capsule_signed.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + private-key = "key.key"; + public-key-cert = "key.crt"; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/313_capsule_version.dts b/tools/binman/test/313_capsule_version.dts new file mode 100644 index 0000000000..bafef3609e --- /dev/null +++ b/tools/binman/test/313_capsule_version.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + fw-version = <0x2>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/314_capsule_signed_ver.dts b/tools/binman/test/314_capsule_signed_ver.dts new file mode 100644 index 0000000000..85c784bba4 --- /dev/null +++ b/tools/binman/test/314_capsule_signed_ver.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + fw-version = <0x2>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + private-key = "key.key"; + public-key-cert = "key.crt"; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/315_capsule_oemflags.dts b/tools/binman/test/315_capsule_oemflags.dts new file mode 100644 index 0000000000..f736e8758f --- /dev/null +++ b/tools/binman/test/315_capsule_oemflags.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + oem-flags = <0x8000>; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/316_capsule_missing_key.dts b/tools/binman/test/316_capsule_missing_key.dts new file mode 100644 index 0000000000..2080b50e3d --- /dev/null +++ b/tools/binman/test/316_capsule_missing_key.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + private-key = "tools/binman/test/key.key"; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/317_capsule_missing_index.dts b/tools/binman/test/317_capsule_missing_index.dts new file mode 100644 index 0000000000..aadb61f647 --- /dev/null +++ b/tools/binman/test/317_capsule_missing_index.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + /* Image GUID for testing capsule update */ + image-guid = "binman-test"; + hardware-instance = <0x0>; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/318_capsule_missing_guid.dts b/tools/binman/test/318_capsule_missing_guid.dts new file mode 100644 index 0000000000..d76afba853 --- /dev/null +++ b/tools/binman/test/318_capsule_missing_guid.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + efi-capsule { + image-index = <0x1>; + hardware-instance = <0x0>; + + blob { + filename = "capsule_input.bin"; + }; + }; + }; +};