Use the timing parameter set in the MMC core to set the mode in UHSMS bit field. This is in preparation for adding HS200 support in omap hsmmc driver.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com
---
Changes in v3: - prefer the usage of the BIT() macro over the construct ( 1 << x )
arch/arm/include/asm/omap_mmc.h | 12 ++++++++++- drivers/mmc/omap_hsmmc.c | 47 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h index c4d326d..507435a 100644 --- a/arch/arm/include/asm/omap_mmc.h +++ b/arch/arm/include/asm/omap_mmc.h @@ -53,7 +53,8 @@ struct hsmmc { unsigned int sysctl; /* 0x12C */ unsigned int stat; /* 0x130 */ unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; + unsigned char res4[0x4]; + unsigned int ac12; /* 0x13C */ unsigned int capa; /* 0x140 */ unsigned char res5[0x10]; unsigned int admaes; /* 0x154 */ @@ -170,6 +171,15 @@ struct omap_hsmmc_plat { #define IOV_3V0 3000000 #define IOV_1V8 1800000
+#define AC12_ET BIT(22) +#define AC12_UHSMC_MASK (7 << 16) +#define AC12_UHSMC_DDR50 (4 << 16) +#define AC12_UHSMC_SDR104 (3 << 16) +#define AC12_UHSMC_SDR50 (2 << 16) +#define AC12_UHSMC_SDR25 (1 << 16) +#define AC12_UHSMC_SDR12 (0 << 16) +#define AC12_UHSMC_RES (0x7 << 16) + /* Driver definitions */ #define MMCSD_SECTOR_SIZE 512 #define MMC_CARD 0 diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 5141bf6..c6b74a1 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -76,6 +76,7 @@ struct omap_hsmmc_data { #endif #if CONFIG_IS_ENABLED(DM_MMC) uint iov; + enum bus_mode mode; #endif u8 controller_flags; #ifndef CONFIG_OMAP34XX @@ -258,6 +259,48 @@ void mmc_init_stream(struct hsmmc *mmc_base) }
#if CONFIG_IS_ENABLED(DM_MMC) +static void omap_hsmmc_set_timing(struct mmc *mmc) +{ + u32 val; + struct hsmmc *mmc_base; + struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc); + + mmc_base = priv->base_addr; + + val = readl(&mmc_base->ac12); + val &= ~AC12_UHSMC_MASK; + priv->mode = mmc->selected_mode; + + switch (priv->mode) { + case MMC_HS_200: + case UHS_SDR104: + val |= AC12_UHSMC_SDR104; + break; + case UHS_SDR50: + val |= AC12_UHSMC_SDR50; + break; + case MMC_DDR_52: + case UHS_DDR50: + val |= AC12_UHSMC_DDR50; + break; + case SD_HS: + case MMC_HS_52: + case UHS_SDR25: + val |= AC12_UHSMC_SDR25; + break; + case MMC_LEGACY: + case MMC_HS: + case SD_LEGACY: + case UHS_SDR12: + val |= AC12_UHSMC_SDR12; + break; + default: + val |= AC12_UHSMC_RES; + break; + } + writel(val, &mmc_base->ac12); +} + static void omap_hsmmc_conf_bus_power(struct mmc *mmc) { struct hsmmc *mmc_base; @@ -928,6 +971,10 @@ static int omap_hsmmc_set_ios(struct udevice *dev) if (priv->clock != mmc->clock) omap_hsmmc_set_clock(mmc);
+#if CONFIG_IS_ENABLED(DM_MMC) + if (priv->mode != mmc->selected_mode) + omap_hsmmc_set_timing(mmc); +#endif return 0; }