Am 13.04.2016 um 19:31 schrieb Stephen Warren swarren@wwwdotorg.org:
On 04/13/2016 11:21 AM, Alexander Graf wrote:
Am 13.04.2016 um 19:00 schrieb Stephen Warren swarren@wwwdotorg.org:
On 04/13/2016 09:51 AM, Alexander Graf wrote:
On 04/13/2016 05:31 PM, Stephen Warren wrote: > On 04/13/2016 06:55 AM, Andreas Färber wrote: > Am 13.04.2016 um 14:48 schrieb Andreas Färber: > The 4.5.0 kernel cannot cope with U-Boot's internal device tree, and > the > distro boot commands are looking for $fdtfile, so provide it to avoid > having users supply a dumb boot.scr doing a setenv fdtfile ...; boot, > defeating the purpose of generic EFI boot. > > Cc: Stephen Warren swarren@nvidia.com > Cc: Alexander Graf agraf@suse.de > Signed-off-by: Andreas Färber afaerber@suse.de > --- > include/configs/jetson-tk1.h | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/include/configs/jetson-tk1.h > b/include/configs/jetson-tk1.h > index 59dbb20..82a4be4 100644 > --- a/include/configs/jetson-tk1.h > +++ b/include/configs/jetson-tk1.h > @@ -63,6 +63,10 @@ > /* General networking support */ > #define CONFIG_CMD_DHCP > > +#define BOARD_EXTRA_ENV_SETTINGS \ > + "fdtfile=tegra124-jetson-tk1.dtb\0" \ > + ""
Is there any more intelligent solution than doing this for each board?
Yes, the distro boot scripts shouldn't be using $fdtfile unconditionally since it's not guaranteed to be set. The model is that boot scripts determine the FDT filename, and $fdtfile is an optional override.
The point of all of the efi magic is that we can completely get rid of boot scripts. Boards use the distro scripts, everything else gets implicitly detected and executed. The way other boards deal with common code mapping into separate boards is to either implement a "findfdt" scriptlet or directly write the fdtfile variable (e.g. beaglebone) in board init (e.g. rpi).
It looks like the hard-coded use of $fdtfile was added into the EFI path, which I didn't get to review, and which shouldn't be enabled by default but unfortunately is.
s/un// :)
Just imagine a world where people don't have to worry about bootloaders anymore. Things would "just work". You plug in a usb stick, it comes up, boots Linux, everthing goes without anyone touching boot scripts, downloading board specific files, etc. You could get a random distribution from a common download page from somewhere and just run it.
Well, you can also just look at any random x86 system. They get at least that part pretty right these days.
Well, you can also get the same benefit using extlinux.conf, and without relying on EFI:-P
Anyway, nothing in your benefits-of-EFI statement implies that relying on $fdtfile being set is correct. That's a new requirement that didn't exist before. Either the requirement needs to be removed (e.g. using a default FDT filename such as "${soc}-${board}${boardver}.dts") or only enabling this functionality on boards that do set $fdtfile, since it relies on that.
On boards that fon't set fdtfile we just don't load it, because we can't find the file. So you're getting a working grub2 payload, but Linux gets an empty device tree unless you pass it in using the grub2 "devicetree" command.
It's really just a convenience helper. And a nice piece to the puzzle that by convention allows users to think less about u-boot internals. The efi code works fine without.
Except for the fact that it doesn't just work, since if it did there wouldn't be a need for the patch in this email thread.
I think the correct fix is to abandon this patch, and have the EFI code (i.e. the scripts in the distro boot commands most likely) calculate a default value for $fdtfile if it isn't already set. Something like:
if test -n "${fdtfile}"; then set _fdt ${fdtfile}; else set _fdt ${soc}-${board}${boardver}.dtb;
... and use ${_fdt} instead of relying on ${fdtfile}.
If you still want to pursue this patch, it should be enhanced to cover all boards where the EFI code is enabled and $fdtfile isn't already set somehow, which I expect is almost all U-Boot boards since the Kconfig option is "default y".
Only the ones that do distro bootcmd. I'll send a patch later. I really like the idea :).
Thanks!
Alex