This patchset is updating zynqmp DT binding.
Thanks, Michal
Anurag Kumar Vulisha (6): arm64: zynqmp: Add SMMU support for SATA IP arm64: zynqmp: Add reset-controller support in serdes driver arm64: zynqmp: Use reset controller framework for asserting/de-asserting reset arm64: zynqmp: Add support reading SoC revision using nvmem driver in dwc3 arm64: zynqmp: Uncomment snps,quirk-frame-length-adjustment flag in dwc3 arm64: zynqmp: usb: Correct IOMMU node for making SMMU work with USB
Bharat Kumar Gogada (1): arm64: zynqmp: zcu102: Modifying GTR lane-0 to PCIe
Chirag Parekh (1): arm64: zynqmp: Update device tree for gpio
Hyun Kwon (1): arm64: zynqmp: Update the GPU address size
Jolly Shah (1): arm64: zynqmp: Reduced min-residency time for idle state node
Jyotheeswar Reddy (1): arm64: zynqmp: DT: Fix typo in idle-states node definition
Jyotheeswar Reddy Mutthareddyvari (1): arm64: zynqmp: PM: Specify power domains for DP related nodes
Madhurkiran Harikrishnan (1): arm64: zynqmp: Add clock name for GPU
Manish Narani (3): arm64: zynqmp: sdhci: set host quirk2 for no 1.8V support for 1.0 silicon arm64: zynqmp: Enabled CCI support for USB arm64: zynqmmp: Add USB OTG interrupts support in dt
Michal Simek (16): arm64: zynqmp: Add references to cpu nodes arm64: zynqmp: Fix broken architected timer interrupt trigger arm64: zynqmp: Add missing gpio property to dtsi arm64: zynqmp: Use revision in dts file description arm64: zynqmp: Add revB string to compatible string arm64: zynqmp: Add missing alias for gem0 for ep108 arm64: zynqmp: Remove leading 0s from mtd table for spi flashes arm64: zynqmp: Use SPDX license with dc4 arm64: zynqmp: Remove local-mac-address from dtsi file arm64: zynqmp: Update device tree for pinmux arm64: zynqmp: Add support for zcu102 1.0 rev arm64: zynqmp: Remove tx_termination_fix detection on silicon v1 arm64: zynqmp: dt: Add AMS node arm64: zynqmp: Move nodes which have no reg property out of bus arm64: zynqmp: Remove clock setting from dtsi arm64: zynqmp: Add note about si5328 interrupt
Naga Sureshkumar Relli (1): arm64: zynqmp: disable smmu
Nava kishore Manne (3): arm64: zynqmp: Label whole PL part as fpga_full region arm64: zynqmp: rtc: Add calibration arm64: zynqmp: Add support for zynqmp nvmem firmware driver
Rob Herring (1): arm64: dts: xilinx: fix PCI bus dtc warnings
Shubhrajyoti Datta (2): arm64: zynqmp: Update the OPPs for cpu freq arm64: zynqmp: Enable watchdog by default
Soren Brinkmann (1): arm64: zynqmp: PM: Add IRQ
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-clk.dtsi | 2 +- arch/arm/dts/zynqmp-ep108-clk.dtsi | 2 +- arch/arm/dts/zynqmp-ep108.dts | 5 +- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 1 - arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 5 +- arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 9 +- arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 1 - arch/arm/dts/zynqmp-zcu102-rev1.0.dts | 37 +++ arch/arm/dts/zynqmp-zcu102-revA.dts | 321 +++++++++++++++++++++++++- arch/arm/dts/zynqmp-zcu102-revB.dts | 1 + arch/arm/dts/zynqmp.dtsi | 284 +++++++++++++++-------- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 75 ++++++ include/dt-bindings/pinctrl/pinctrl-zynqmp.h | 30 +++ 14 files changed, 653 insertions(+), 121 deletions(-) create mode 100644 arch/arm/dts/zynqmp-zcu102-rev1.0.dts create mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig create mode 100644 include/dt-bindings/pinctrl/pinctrl-zynqmp.h