On 11/03/2015 03:30 PM, Andy Fleming wrote:
This board runs a P5020 or P5040 chip, and utilizes an EEPROM with similar formatting to the Freescale P5020DS.
Large amounts of this code were developed by Adrian Cox <adrian at humboldt dot co dot uk>
Signed-off-by: Andy Fleming afleming@gmail.com
v2:
- Cleaned up sys_eeprom.c
- Removed CONFIG_CMD_ELF, CONFIG_SYS_GENERIC_BOARD
Why do you want to remove CONFIG_SYS_GENERIC_BOARD? We are dropping non-generic board.
arch/powerpc/cpu/mpc85xx/Kconfig | 4 + board/varisys/common/Makefile | 23 ++ board/varisys/common/eeprom.h | 6 + board/varisys/common/sys_eeprom.c | 500 +++++++++++++++++++++++++++++ board/varisys/cyrus/Kconfig | 13 + board/varisys/cyrus/Makefile | 8 + board/varisys/cyrus/README | 21 ++ board/varisys/cyrus/cyrus.c | 116 +++++++ board/varisys/cyrus/cyrus.h | 11 + board/varisys/cyrus/ddr.c | 188 +++++++++++ board/varisys/cyrus/eth.c | 100 ++++++ board/varisys/cyrus/law.c | 27 ++ board/varisys/cyrus/pbi.cfg | 35 +++ board/varisys/cyrus/pci.c | 23 ++ board/varisys/cyrus/rcw_p5020_v2.cfg | 11 + board/varisys/cyrus/rcw_p5040.cfg | 11 + board/varisys/cyrus/tlb.c | 106 +++++++ configs/Cyrus_P5020_defconfig | 9 + configs/Cyrus_P5040_defconfig | 9 + include/configs/cyrus.h | 588 +++++++++++++++++++++++++++++++++++ 20 files changed, 1809 insertions(+) create mode 100644 board/varisys/common/Makefile create mode 100644 board/varisys/common/eeprom.h create mode 100644 board/varisys/common/sys_eeprom.c create mode 100644 board/varisys/cyrus/Kconfig create mode 100644 board/varisys/cyrus/Makefile create mode 100644 board/varisys/cyrus/README create mode 100644 board/varisys/cyrus/cyrus.c create mode 100644 board/varisys/cyrus/cyrus.h create mode 100644 board/varisys/cyrus/ddr.c create mode 100644 board/varisys/cyrus/eth.c create mode 100644 board/varisys/cyrus/law.c create mode 100644 board/varisys/cyrus/pbi.cfg create mode 100644 board/varisys/cyrus/pci.c create mode 100644 board/varisys/cyrus/rcw_p5020_v2.cfg create mode 100644 board/varisys/cyrus/rcw_p5040.cfg create mode 100644 board/varisys/cyrus/tlb.c create mode 100644 configs/Cyrus_P5020_defconfig create mode 100644 configs/Cyrus_P5040_defconfig create mode 100644 include/configs/cyrus.h
Please add MAINTAINERS file.
<snip>
diff --git a/board/varisys/common/sys_eeprom.c b/board/varisys/common/sys_eeprom.c new file mode 100644 index 0000000..086fad2 --- /dev/null +++ b/board/varisys/common/sys_eeprom.c @@ -0,0 +1,500 @@ +/*
- Copyright 2006, 2008-2009, 2011 Freescale Semiconductor
- York Sun (yorksun@freescale.com)
- Haiying Wang (haiying.wang@freescale.com)
- Timur Tabi (timur@freescale.com)
- This defines the API for storing board information in the
- eeprom. It has been adapted from an earlier version of the
- Freescale code for doing the same thing. Therefore it is
- nearly identical to the Freescale code, but is intended for
- use with Varisys-produced boards.
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <command.h> +#include <i2c.h> +#include <linux/ctype.h>
+#include "eeprom.h"
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID_MAC +#define MAX_NUM_PORTS CONFIG_SYS_I2C_EEPROM_NXID_MAC +#else +#define MAX_NUM_PORTS 8 +#endif +#define NXID_VERSION 0
+/**
- static eeprom: EEPROM layout for NXID formats
- See Freescale application note AN3638 for details.
- */
This comment and file header still implies this file follows Freescale EEPROM spec. I think additional comment is needed to state the difference.
There are several blank lines added to the end of files.
York