On 1/3/21 3:26 AM, Jernej Skrabec wrote:
H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net
arch/arm/dts/sunxi-u-boot.dtsi | 9 +++++++++ arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 7 +++++++ arch/arm/mach-sunxi/Kconfig | 11 ++++++++++- arch/arm/mach-sunxi/cpu_info.c | 2 ++ drivers/power/Kconfig | 1 + include/configs/sunxi-common.h | 10 ++++++++++ 6 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index c77cf7cacf0c..7e8644f390a8 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -3,6 +3,9 @@ #ifdef CONFIG_MACH_SUN50I_H6 #define BL31_ADDR 0x104000 #define SCP_ADDR 0x114000 +#elif defined(CONFIG_MACH_SUN50I_H616) +#define BL31_ADDR 0x40004000 +#define SCP_ADDR 0x028000
There should be no SCP_ADDR if there is no SCP firmware.
#else #define BL31_ADDR 0x44000 #define SCP_ADDR 0x50000 @@ -61,6 +64,7 @@ }; };
+#ifndef CONFIG_MACH_SUN50I_H616 scp { description = "SCP firmware"; type = "firmware"; @@ -73,6 +77,7 @@ missing-msg = "scp-sunxi"; }; }; +#endif
@fdt-SEQ { description = "NAME";@@ -87,7 +92,11 @@ @config-SEQ { description = "NAME"; firmware = "atf"; +#ifdef CONFIG_MACH_SUN50I_H616
loadables = "uboot";+#else loadables = "scp", "uboot"; +#endif fdt = "fdt-SEQ"; }; }; diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h index 6392cb07b472..d9cf8ae04288 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h @@ -28,13 +28,20 @@ #define SUNXI_GIC400_BASE 0x03020000 #define SUNXI_IOMMU_BASE 0x030F0000
+#ifdef CONFIG_MACH_SUN50I_H6 #define SUNXI_DRAM_COM_BASE 0x04002000 #define SUNXI_DRAM_CTL0_BASE 0x04003000 #define SUNXI_DRAM_PHY0_BASE 0x04005000 +#endif #define SUNXI_NFC_BASE 0x04011000 #define SUNXI_MMC0_BASE 0x04020000 #define SUNXI_MMC1_BASE 0x04021000 #define SUNXI_MMC2_BASE 0x04022000 +#ifdef CONFIG_MACH_SUN50I_H616 +#define SUNXI_DRAM_COM_BASE 0x047FA000 +#define SUNXI_DRAM_CTL0_BASE 0x047FB000 +#define SUNXI_DRAM_PHY0_BASE 0x04800000 +#endif
#define SUNXI_UART0_BASE 0x05000000 #define SUNXI_UART1_BASE 0x05000400 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1a5497989f04..859b30d74ceb 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -190,9 +190,10 @@ config MACH_SUNXI_H3_H5 select SUPPORT_SPL
# TODO: try out A80's 8GiB DRAM space +# TODO: H616 supports 4 GiB DRAM space config SUNXI_DRAM_MAX_SIZE hex
- default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
- default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 || MACH_SUN50I_H616 default 0x80000000
choice @@ -354,6 +355,12 @@ config MACH_SUN50I_H6 select PHY_SUN4I_USB select DRAM_SUN50I_H6
+config MACH_SUN50I_H616
- bool "sun50i (Allwinner H616)"
- select ARM64
- select DRAM_SUN50I_H616
- select SUN50I_GEN_H6
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" @@ -589,6 +596,7 @@ config SYS_CLK_FREQ default 816000000 if MACH_SUN50I || MACH_SUN50I_H5 default 1008000000 if MACH_SUN8I default 1008000000 if MACH_SUN9I
- default 1008000000 if MACH_SUN50I_H616
config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I @@ -599,6 +607,7 @@ config SYS_CONFIG_NAME default "sun9i" if MACH_SUN9I default "sun50i" if MACH_SUN50I default "sun50i" if MACH_SUN50I_H6
- default "sun50i" if MACH_SUN50I_H616
config SYS_BOARD default "sunxi" diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c index 875e5a1a8a8e..ba33ef24300c 100644 --- a/arch/arm/mach-sunxi/cpu_info.c +++ b/arch/arm/mach-sunxi/cpu_info.c @@ -99,6 +99,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner H5 (SUN50I)\n"); #elif defined CONFIG_MACH_SUN50I_H6 puts("CPU: Allwinner H6 (SUN50I)\n"); +#elif defined CONFIG_MACH_SUN50I_H616
- puts("CPU: Allwinner H616 (SUN50I)\n");
#else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index d17cf2d9112a..c5fbf1f832a9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -13,6 +13,7 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
- default AXP305_POWER if MACH_SUN50I_H616 default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 203cb10fbabc..6e8f547214d6 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -178,9 +178,14 @@ #define LOW_LEVEL_SRAM_STACK 0x00018000 #endif /* !CONFIG_ARM64 */ #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 +#ifdef CONFIG_MACH_SUN50I_H616 +#define CONFIG_SPL_MAX_SIZE 0xbfa0 /* 48 KiB */ +#define LOW_LEVEL_SRAM_STACK 0x58000 +#else #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ /* end of SRAM A2 on H6 for now */ #define LOW_LEVEL_SRAM_STACK 0x00118000 +#endif #else #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ @@ -188,7 +193,12 @@
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+/* H616 supports 48 KiB SPL */ +#ifdef CONFIG_MACH_SUN50I_H616 +#define CONFIG_SPL_PAD_TO 49152 /* decimal for 'dd' */
H616 supports much larger SPLs than 48 KiB, and CONFIG_SPL_PAD_TO enforces both a minimum and maximum size. So please leave CONFIG_SPL_PAD_TO undefined on the new platform (or for all SUN50I_GEN_H6, where the SPL size restriction was removed).
+#else #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ +#endif
/* I2C */
Cheers, Samuel