This option is only used in one driver and two boards. It does not seem worth having the ability to remove this part of the support.
Drop the option.
Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Tom Rini trini@konsulko.com Reviewed-by: Heiko Schocher hs@denx.de ---
Changes in v3: None Changes in v2: None
README | 1 - drivers/misc/ds4510.c | 8 -------- include/configs/xpedite517x.h | 1 - include/configs/xpedite537x.h | 1 - scripts/config_whitelist.txt | 1 - 5 files changed, 12 deletions(-)
diff --git a/README b/README index 864bf8bc22..3eb2be8922 100644 --- a/README +++ b/README @@ -831,7 +831,6 @@ The following options need to be configured: CONFIG_CMD_DHCP * DHCP support CONFIG_CMD_DIAG * Diagnostics CONFIG_CMD_DS4510 * ds4510 I2C gpio commands - CONFIG_CMD_DS4510_INFO * ds4510 I2C info command CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd CONFIG_CMD_DS4510_RST * ds4510 I2C rst command CONFIG_CMD_DTT * Digital Therm and Thermostat diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index d7c9bd73c8..940e2ce6a0 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -186,7 +186,6 @@ int ds4510_gpio_read_val(uint8_t chip) }
#ifdef CONFIG_CMD_DS4510 -#ifdef CONFIG_CMD_DS4510_INFO /* * Display DS4510 information */ @@ -240,7 +239,6 @@ static int ds4510_info(uint8_t chip)
return 0; } -#endif /* CONFIG_CMD_DS4510_INFO */
cmd_tbl_t cmd_ds4510[] = { U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""), @@ -248,9 +246,7 @@ cmd_tbl_t cmd_ds4510[] = { U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""), U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""), U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""), -#ifdef CONFIG_CMD_DS4510_INFO U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""), -#endif #ifdef CONFIG_CMD_DS4510_RST U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""), #endif @@ -324,10 +320,8 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else tmp &= ~(1 << ul_arg2); return ds4510_pullup_write(chip, tmp); -#ifdef CONFIG_CMD_DS4510_INFO case DS4510_CMD_INFO: return ds4510_info(chip); -#endif #ifdef CONFIG_CMD_DS4510_RST case DS4510_CMD_RSTDELAY: return ds4510_rstdelay_write(chip, ul_arg2); @@ -378,10 +372,8 @@ U_BOOT_CMD( "ds4510 eeprom/seeprom/sram/gpio access", "device [dev]\n" " - show or set current device address\n" -#ifdef CONFIG_CMD_DS4510_INFO "ds4510 info\n" " - display ds4510 info\n" -#endif "ds4510 output pin 0|1\n" " - set pin low or high-Z\n" "ds4510 input pin\n" diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 447fd9557a..dae61b11e4 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -503,7 +503,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Command configuration. */ #define CONFIG_CMD_DS4510 -#define CONFIG_CMD_DS4510_INFO #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IRQ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 48f07b08c0..ce1ff86135 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -355,7 +355,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * Command configuration. */ #define CONFIG_CMD_DS4510 -#define CONFIG_CMD_DS4510_INFO #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_JFFS2 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index fa9c3fc8cb..38a73477fe 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -384,7 +384,6 @@ CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG CONFIG_CMD_DS4510 -CONFIG_CMD_DS4510_INFO CONFIG_CMD_DS4510_MEM CONFIG_CMD_DS4510_RST CONFIG_CMD_DTT