- use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f()
Signed-off-by: Heiko Schocher hs@denx.de Cc: Prafulla Wadaskar prafulla@marvell.com --- board/keymile/km_arm/km_arm.c | 24 +++++++++++++++--------- include/configs/km_arm.h | 6 ++++-- 2 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 7c0b858..a2a8bfe 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -143,7 +143,7 @@ int misc_init_r(void) return 0; }
-int board_init(void) +int board_early_init_f(void) { u32 tmp;
@@ -160,14 +160,6 @@ int board_init(void) writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4); printf("KM: setting NAND mode\n");
- /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_SUEN3; - - /* address of boot parameters */ - gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; - #if defined(CONFIG_SOFT_I2C) /* init the GPIO for I2C Bitbang driver */ kw_gpio_set_valid(SUEN3_SDA_PIN, 1); @@ -179,6 +171,20 @@ int board_init(void) kw_gpio_set_valid(SUEN3_ENV_WP, 38); kw_gpio_direction_output(SUEN3_ENV_WP, 1); #endif + + return 0; +} + +int board_init(void) +{ + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_SUEN3; + + /* address of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + return 0; }
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index faa0f50..9270296 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -182,6 +182,8 @@ int get_scl (void);
/* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) +/* Kirkwood has 2k of Security SRAM, use it for SP */ +#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +/* Do early setups now in board_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 #endif /* _CONFIG_KM_ARM_H */