26 Feb
2013
26 Feb
'13
2:22 p.m.
Hi Benoit,
On Fri, Feb 15, 2013 at 6:54 PM, Benoît Thébaudeau benoit.thebaudeau@advansee.com wrote:
Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard.
eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for this board, which satisfies the 30-ns NF R/W cycle requirement.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com
NAND is not detected on my mx53ard.
I think we need to adjust the IOMUX as per: http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/board/freescale...
Regards,
Fabio Estevam