From: Kuan Lim Lee kuanlim.lee@linux.starfivetech.com
Add pinctrl driver for StarFive JH7110 SoC.
Signed-off-by: Kuan Lim Lee kuanlim.lee@linux.starfivetech.com Signed-off-by: Emil Renner Berthing kernel@esmil.dk Signed-off-by: Jianlong Huang jianlong.huang@starfivetech.com Signed-off-by: Yanhong Wang yanhong.wang@starfivetech.com Tested-by: Conor Dooley conor.dooley@microchip.com --- drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/starfive/Kconfig | 28 ++ drivers/pinctrl/starfive/Makefile | 6 + drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 113 +++++ drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 399 ++++++++++++++++++ drivers/pinctrl/starfive/pinctrl-starfive.c | 382 +++++++++++++++++ drivers/pinctrl/starfive/pinctrl-starfive.h | 55 +++ 8 files changed, 985 insertions(+) create mode 100644 drivers/pinctrl/starfive/Kconfig create mode 100644 drivers/pinctrl/starfive/Makefile create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index b6ef2acced..75b3ff47a2 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -359,5 +359,6 @@ source "drivers/pinctrl/renesas/Kconfig" source "drivers/pinctrl/rockchip/Kconfig" source "drivers/pinctrl/sunxi/Kconfig" source "drivers/pinctrl/uniphier/Kconfig" +source "drivers/pinctrl/starfive/Kconfig"
endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 3b167d099f..852adee4b4 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o obj-$(CONFIG_$(SPL_)PINCTRL_STMFX) += pinctrl-stmfx.o obj-y += broadcom/ obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o +obj-$(CONFIG_PINCTRL_STARFIVE) += starfive/ diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig new file mode 100644 index 0000000000..1b859c863e --- /dev/null +++ b/drivers/pinctrl/starfive/Kconfig @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config SPL_PINCTRL_STARFIVE + bool "Support Pinctrl driver for StarFive SoC in SPL" + depends on SPL_PINCTRL_FULL && STARFIVE_JH7110 + help + Enable support pin control driver for StarFive SoC. + +config SPL_PINCTRL_STARFIVE_JH7110 + bool "Support Pinctrl and GPIO driver for StarFive JH7110 SoC in SPL" + depends on SPL_PINCTRL_STARFIVE + help + Enable support pinctrl and gpio driver for StarFive JH7110 in SPL. + +config PINCTRL_STARFIVE + bool "Pinctrl driver for StarFive SoC" + depends on PINCTRL_FULL && STARFIVE_JH7110 + help + Say yes here to support pin control on the StarFive RISC-V SoC. + This also provides an interface to the GPIO pins not used by other + peripherals supporting inputs, outputs, configuring pull-up/pull-down + and interrupts on input changes. + +config PINCTRL_STARFIVE_JH7110 + bool "Pinctrl and GPIO driver for StarFive JH7110 SoC" + depends on PINCTRL_STARFIVE + help + This selects the pinctrl driver for JH7110 starfive. diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile new file mode 100644 index 0000000000..a4a12069b3 --- /dev/null +++ b/drivers/pinctrl/starfive/Makefile @@ -0,0 +1,6 @@ + +# SPDX-License-Identifier: GPL-2.0 +# Core +obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE) += pinctrl-starfive.o +# SoC Drivers +obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE_JH7110) += pinctrl-jh7110-sys.o pinctrl-jh7110-aon.o diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c b/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c new file mode 100644 index 0000000000..2d739906e2 --- /dev/null +++ b/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl / GPIO driver for StarFive JH7110 SoC + * + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Author: Lee Kuan Lim kuanlim.lee@starfivetech.com + * Author: Jianlong Huang jianlong.huang@starfivetech.com + */ + +#include <dm/read.h> +#include <dm/device_compat.h> +#include <linux/io.h> + +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> +#include "pinctrl-starfive.h" + +#define JH7110_AON_NGPIO 4 +#define JH7110_AON_GC_BASE 64 + +/* registers */ +#define JH7110_AON_DOEN 0x0 +#define JH7110_AON_DOUT 0x4 +#define JH7110_AON_GPI 0x8 +#define JH7110_AON_GPIOIN 0x2c + +#define JH7110_AON_GPIOEN 0xc +#define JH7110_AON_GPIOIS 0x10 +#define JH7110_AON_GPIOIC 0x14 +#define JH7110_AON_GPIOIBE 0x18 +#define JH7110_AON_GPIOIEV 0x1c +#define JH7110_AON_GPIOIE 0x20 +#define JH7110_AON_GPIORIS 0x28 +#define JH7110_AON_GPIOMIS 0x28 + +#define AON_GPO_PDA_0_5_CFG 0x30 + +static int jh7110_aon_set_one_pin_mux(struct udevice *dev, unsigned int pin, + unsigned int din, u32 dout, + u32 doen, u32 func) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + + if (pin < priv->info->ngpios && func == 0) + starfive_set_gpiomux(dev, pin, din, dout, doen); + + return 0; +} + +static int jh7110_aon_get_padcfg_base(struct udevice *dev, + unsigned int pin) +{ + if (pin < PAD_GMAC0_MDC) + return AON_GPO_PDA_0_5_CFG; + + return -1; +} + +static void jh7110_aon_init_hw(struct udevice *dev) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + + /* mask all GPIO interrupts */ + writel(0, priv->base + JH7110_AON_GPIOIE); + /* clear edge interrupt flags */ + writel(0, priv->base + JH7110_AON_GPIOIC); + writel(0x0f, priv->base + JH7110_AON_GPIOIC); + /* enable GPIO interrupts */ + writel(1, priv->base + JH7110_AON_GPIOEN); +} + +const struct starfive_pinctrl_soc_info jh7110_aon_pinctrl_info = { + /* pin conf */ + .set_one_pinmux = jh7110_aon_set_one_pin_mux, + .get_padcfg_base = jh7110_aon_get_padcfg_base, + + /* gpio dout/doen/din/gpioinput register */ + .dout_reg_base = JH7110_AON_DOUT, + .dout_mask = GENMASK(3, 0), + .doen_reg_base = JH7110_AON_DOEN, + .doen_mask = GENMASK(2, 0), + .gpi_reg_base = JH7110_AON_GPI, + .gpi_mask = GENMASK(3, 0), + .gpioin_reg_base = JH7110_AON_GPIOIN, + + /* gpio */ + .gpio_bank_name = "RGPIO", + .ngpios = JH7110_AON_NGPIO, + .gpio_init_hw = jh7110_aon_init_hw, +}; + +static int jh7110_aon_pinctrl_probe(struct udevice *dev) +{ + struct starfive_pinctrl_soc_info *info = + (struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev); + + return starfive_pinctrl_probe(dev, info); +} + +static const struct udevice_id jh7110_aon_pinctrl_ids[] = { + /* JH7110 aon pinctrl */ + { .compatible = "starfive,jh7110-aon-pinctrl", + .data = (ulong)&jh7110_aon_pinctrl_info, }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(jh7110_aon_pinctrl) = { + .name = "jh7110-aon-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = jh7110_aon_pinctrl_ids, + .priv_auto = sizeof(struct starfive_pinctrl_priv), + .ops = &starfive_pinctrl_ops, + .probe = jh7110_aon_pinctrl_probe, +}; diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c new file mode 100644 index 0000000000..dafba65eae --- /dev/null +++ b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl / GPIO driver for StarFive JH7110 SoC + * + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Author: Lee Kuan Lim kuanlim.lee@starfivetech.com + * Author: Jianlong Huang jianlong.huang@starfivetech.com + */ + +#include <dm/read.h> +#include <dm/device_compat.h> +#include <linux/io.h> + +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> +#include "pinctrl-starfive.h" + +#define JH7110_SYS_NGPIO 64 +#define JH7110_SYS_GC_BASE 0 + +/* registers */ +#define JH7110_SYS_DOEN 0x000 +#define JH7110_SYS_DOUT 0x040 +#define JH7110_SYS_GPI 0x080 +#define JH7110_SYS_GPIOIN 0x118 + +#define JH7110_SYS_GPIOEN 0x0dc +#define JH7110_SYS_GPIOIS0 0x0e0 +#define JH7110_SYS_GPIOIS1 0x0e4 +#define JH7110_SYS_GPIOIC0 0x0e8 +#define JH7110_SYS_GPIOIC1 0x0ec +#define JH7110_SYS_GPIOIBE0 0x0f0 +#define JH7110_SYS_GPIOIBE1 0x0f4 +#define JH7110_SYS_GPIOIEV0 0x0f8 +#define JH7110_SYS_GPIOIEV1 0x0fc +#define JH7110_SYS_GPIOIE0 0x100 +#define JH7110_SYS_GPIOIE1 0x104 +#define JH7110_SYS_GPIORIS0 0x108 +#define JH7110_SYS_GPIORIS1 0x10c +#define JH7110_SYS_GPIOMIS0 0x110 +#define JH7110_SYS_GPIOMIS1 0x114 + +#define SYS_GPO_PDA_0_74_CFG 0x120 +#define SYS_GPO_PDA_89_94_CFG 0x284 + +static const struct starfive_pinctrl_pin jh7110_sys_pins[] = { + STARFIVE_PINCTRL(PAD_GPIO0, "GPIO0"), + STARFIVE_PINCTRL(PAD_GPIO1, "GPIO1"), + STARFIVE_PINCTRL(PAD_GPIO2, "GPIO2"), + STARFIVE_PINCTRL(PAD_GPIO3, "GPIO3"), + STARFIVE_PINCTRL(PAD_GPIO4, "GPIO4"), + STARFIVE_PINCTRL(PAD_GPIO5, "GPIO5"), + STARFIVE_PINCTRL(PAD_GPIO6, "GPIO6"), + STARFIVE_PINCTRL(PAD_GPIO7, "GPIO7"), + STARFIVE_PINCTRL(PAD_GPIO8, "GPIO8"), + STARFIVE_PINCTRL(PAD_GPIO9, "GPIO9"), + STARFIVE_PINCTRL(PAD_GPIO10, "GPIO10"), + STARFIVE_PINCTRL(PAD_GPIO11, "GPIO11"), + STARFIVE_PINCTRL(PAD_GPIO12, "GPIO12"), + STARFIVE_PINCTRL(PAD_GPIO13, "GPIO13"), + STARFIVE_PINCTRL(PAD_GPIO14, "GPIO14"), + STARFIVE_PINCTRL(PAD_GPIO15, "GPIO15"), + STARFIVE_PINCTRL(PAD_GPIO16, "GPIO16"), + STARFIVE_PINCTRL(PAD_GPIO17, "GPIO17"), + STARFIVE_PINCTRL(PAD_GPIO18, "GPIO18"), + STARFIVE_PINCTRL(PAD_GPIO19, "GPIO19"), + STARFIVE_PINCTRL(PAD_GPIO20, "GPIO20"), + STARFIVE_PINCTRL(PAD_GPIO21, "GPIO21"), + STARFIVE_PINCTRL(PAD_GPIO22, "GPIO22"), + STARFIVE_PINCTRL(PAD_GPIO23, "GPIO23"), + STARFIVE_PINCTRL(PAD_GPIO24, "GPIO24"), + STARFIVE_PINCTRL(PAD_GPIO25, "GPIO25"), + STARFIVE_PINCTRL(PAD_GPIO26, "GPIO26"), + STARFIVE_PINCTRL(PAD_GPIO27, "GPIO27"), + STARFIVE_PINCTRL(PAD_GPIO28, "GPIO28"), + STARFIVE_PINCTRL(PAD_GPIO29, "GPIO29"), + STARFIVE_PINCTRL(PAD_GPIO30, "GPIO30"), + STARFIVE_PINCTRL(PAD_GPIO31, "GPIO31"), + STARFIVE_PINCTRL(PAD_GPIO32, "GPIO32"), + STARFIVE_PINCTRL(PAD_GPIO33, "GPIO33"), + STARFIVE_PINCTRL(PAD_GPIO34, "GPIO34"), + STARFIVE_PINCTRL(PAD_GPIO35, "GPIO35"), + STARFIVE_PINCTRL(PAD_GPIO36, "GPIO36"), + STARFIVE_PINCTRL(PAD_GPIO37, "GPIO37"), + STARFIVE_PINCTRL(PAD_GPIO38, "GPIO38"), + STARFIVE_PINCTRL(PAD_GPIO39, "GPIO39"), + STARFIVE_PINCTRL(PAD_GPIO40, "GPIO40"), + STARFIVE_PINCTRL(PAD_GPIO41, "GPIO41"), + STARFIVE_PINCTRL(PAD_GPIO42, "GPIO42"), + STARFIVE_PINCTRL(PAD_GPIO43, "GPIO43"), + STARFIVE_PINCTRL(PAD_GPIO44, "GPIO44"), + STARFIVE_PINCTRL(PAD_GPIO45, "GPIO45"), + STARFIVE_PINCTRL(PAD_GPIO46, "GPIO46"), + STARFIVE_PINCTRL(PAD_GPIO47, "GPIO47"), + STARFIVE_PINCTRL(PAD_GPIO48, "GPIO48"), + STARFIVE_PINCTRL(PAD_GPIO49, "GPIO49"), + STARFIVE_PINCTRL(PAD_GPIO50, "GPIO50"), + STARFIVE_PINCTRL(PAD_GPIO51, "GPIO51"), + STARFIVE_PINCTRL(PAD_GPIO52, "GPIO52"), + STARFIVE_PINCTRL(PAD_GPIO53, "GPIO53"), + STARFIVE_PINCTRL(PAD_GPIO54, "GPIO54"), + STARFIVE_PINCTRL(PAD_GPIO55, "GPIO55"), + STARFIVE_PINCTRL(PAD_GPIO56, "GPIO56"), + STARFIVE_PINCTRL(PAD_GPIO57, "GPIO57"), + STARFIVE_PINCTRL(PAD_GPIO58, "GPIO58"), + STARFIVE_PINCTRL(PAD_GPIO59, "GPIO59"), + STARFIVE_PINCTRL(PAD_GPIO60, "GPIO60"), + STARFIVE_PINCTRL(PAD_GPIO61, "GPIO61"), + STARFIVE_PINCTRL(PAD_GPIO62, "GPIO62"), + STARFIVE_PINCTRL(PAD_GPIO63, "GPIO63"), + STARFIVE_PINCTRL(PAD_SD0_CLK, "SD0_CLK"), + STARFIVE_PINCTRL(PAD_SD0_CMD, "SD0_CMD"), + STARFIVE_PINCTRL(PAD_SD0_DATA0, "SD0_DATA0"), + STARFIVE_PINCTRL(PAD_SD0_DATA1, "SD0_DATA1"), + STARFIVE_PINCTRL(PAD_SD0_DATA2, "SD0_DATA2"), + STARFIVE_PINCTRL(PAD_SD0_DATA3, "SD0_DATA3"), + STARFIVE_PINCTRL(PAD_SD0_DATA4, "SD0_DATA4"), + STARFIVE_PINCTRL(PAD_SD0_DATA5, "SD0_DATA5"), + STARFIVE_PINCTRL(PAD_SD0_DATA6, "SD0_DATA6"), + STARFIVE_PINCTRL(PAD_SD0_DATA7, "SD0_DATA7"), + STARFIVE_PINCTRL(PAD_SD0_STRB, "SD0_STRB"), + STARFIVE_PINCTRL(PAD_GMAC1_MDC, "GMAC1_MDC"), + STARFIVE_PINCTRL(PAD_GMAC1_MDIO, "GMAC1_MDIO"), + STARFIVE_PINCTRL(PAD_GMAC1_RXD0, "GMAC1_RXD0"), + STARFIVE_PINCTRL(PAD_GMAC1_RXD1, "GMAC1_RXD1"), + STARFIVE_PINCTRL(PAD_GMAC1_RXD2, "GMAC1_RXD2"), + STARFIVE_PINCTRL(PAD_GMAC1_RXD3, "GMAC1_RXD3"), + STARFIVE_PINCTRL(PAD_GMAC1_RXDV, "GMAC1_RXDV"), + STARFIVE_PINCTRL(PAD_GMAC1_RXC, "GMAC1_RXC"), + STARFIVE_PINCTRL(PAD_GMAC1_TXD0, "GMAC1_TXD0"), + STARFIVE_PINCTRL(PAD_GMAC1_TXD1, "GMAC1_TXD1"), + STARFIVE_PINCTRL(PAD_GMAC1_TXD2, "GMAC1_TXD2"), + STARFIVE_PINCTRL(PAD_GMAC1_TXD3, "GMAC1_TXD3"), + STARFIVE_PINCTRL(PAD_GMAC1_TXEN, "GMAC1_TXEN"), + STARFIVE_PINCTRL(PAD_GMAC1_TXC, "GMAC1_TXC"), + STARFIVE_PINCTRL(PAD_QSPI_SCLK, "QSPI_SCLK"), + STARFIVE_PINCTRL(PAD_QSPI_CS0, "QSPI_CS0"), + STARFIVE_PINCTRL(PAD_QSPI_DATA0, "QSPI_DATA0"), + STARFIVE_PINCTRL(PAD_QSPI_DATA1, "QSPI_DATA1"), + STARFIVE_PINCTRL(PAD_QSPI_DATA2, "QSPI_DATA2"), + STARFIVE_PINCTRL(PAD_QSPI_DATA3, "QSPI_DATA3"), +}; + +struct jh7110_func_sel { + u16 offset; + u8 shift; + u8 max; +}; + +static const struct jh7110_func_sel + jh7110_sys_func_sel[ARRAY_SIZE(jh7110_sys_pins)] = { + [PAD_GMAC1_RXC] = { 0x29c, 0, 1 }, + [PAD_GPIO10] = { 0x29c, 2, 3 }, + [PAD_GPIO11] = { 0x29c, 5, 3 }, + [PAD_GPIO12] = { 0x29c, 8, 3 }, + [PAD_GPIO13] = { 0x29c, 11, 3 }, + [PAD_GPIO14] = { 0x29c, 14, 3 }, + [PAD_GPIO15] = { 0x29c, 17, 3 }, + [PAD_GPIO16] = { 0x29c, 20, 3 }, + [PAD_GPIO17] = { 0x29c, 23, 3 }, + [PAD_GPIO18] = { 0x29c, 26, 3 }, + [PAD_GPIO19] = { 0x29c, 29, 3 }, + + [PAD_GPIO20] = { 0x2a0, 0, 3 }, + [PAD_GPIO21] = { 0x2a0, 3, 3 }, + [PAD_GPIO22] = { 0x2a0, 6, 3 }, + [PAD_GPIO23] = { 0x2a0, 9, 3 }, + [PAD_GPIO24] = { 0x2a0, 12, 3 }, + [PAD_GPIO25] = { 0x2a0, 15, 3 }, + [PAD_GPIO26] = { 0x2a0, 18, 3 }, + [PAD_GPIO27] = { 0x2a0, 21, 3 }, + [PAD_GPIO28] = { 0x2a0, 24, 3 }, + [PAD_GPIO29] = { 0x2a0, 27, 3 }, + + [PAD_GPIO30] = { 0x2a4, 0, 3 }, + [PAD_GPIO31] = { 0x2a4, 3, 3 }, + [PAD_GPIO32] = { 0x2a4, 6, 3 }, + [PAD_GPIO33] = { 0x2a4, 9, 3 }, + [PAD_GPIO34] = { 0x2a4, 12, 3 }, + [PAD_GPIO35] = { 0x2a4, 15, 3 }, + [PAD_GPIO36] = { 0x2a4, 17, 3 }, + [PAD_GPIO37] = { 0x2a4, 20, 3 }, + [PAD_GPIO38] = { 0x2a4, 23, 3 }, + [PAD_GPIO39] = { 0x2a4, 26, 3 }, + [PAD_GPIO40] = { 0x2a4, 29, 3 }, + + [PAD_GPIO41] = { 0x2a8, 0, 3 }, + [PAD_GPIO42] = { 0x2a8, 3, 3 }, + [PAD_GPIO43] = { 0x2a8, 6, 3 }, + [PAD_GPIO44] = { 0x2a8, 9, 3 }, + [PAD_GPIO45] = { 0x2a8, 12, 3 }, + [PAD_GPIO46] = { 0x2a8, 15, 3 }, + [PAD_GPIO47] = { 0x2a8, 18, 3 }, + [PAD_GPIO48] = { 0x2a8, 21, 3 }, + [PAD_GPIO49] = { 0x2a8, 24, 3 }, + [PAD_GPIO50] = { 0x2a8, 27, 3 }, + [PAD_GPIO51] = { 0x2a8, 30, 3 }, + + [PAD_GPIO52] = { 0x2ac, 0, 3 }, + [PAD_GPIO53] = { 0x2ac, 2, 3 }, + [PAD_GPIO54] = { 0x2ac, 4, 3 }, + [PAD_GPIO55] = { 0x2ac, 6, 3 }, + [PAD_GPIO56] = { 0x2ac, 9, 3 }, + [PAD_GPIO57] = { 0x2ac, 12, 3 }, + [PAD_GPIO58] = { 0x2ac, 15, 3 }, + [PAD_GPIO59] = { 0x2ac, 18, 3 }, + [PAD_GPIO60] = { 0x2ac, 21, 3 }, + [PAD_GPIO61] = { 0x2ac, 24, 3 }, + [PAD_GPIO62] = { 0x2ac, 27, 3 }, + [PAD_GPIO63] = { 0x2ac, 30, 3 }, + + [PAD_GPIO6] = { 0x2b0, 0, 3 }, + [PAD_GPIO7] = { 0x2b0, 2, 3 }, + [PAD_GPIO8] = { 0x2b0, 5, 3 }, + [PAD_GPIO9] = { 0x2b0, 8, 3 }, +}; + +struct jh7110_vin_group_sel { + u16 offset; + u8 shift; + u8 group; +}; + +static const struct jh7110_vin_group_sel + jh7110_sys_vin_group_sel[ARRAY_SIZE(jh7110_sys_pins)] = { + [PAD_GPIO6] = { 0x2b4, 21, 0 }, + [PAD_GPIO7] = { 0x2b4, 18, 0 }, + [PAD_GPIO8] = { 0x2b4, 15, 0 }, + [PAD_GPIO9] = { 0x2b0, 11, 0 }, + [PAD_GPIO10] = { 0x2b0, 20, 0 }, + [PAD_GPIO11] = { 0x2b0, 23, 0 }, + [PAD_GPIO12] = { 0x2b0, 26, 0 }, + [PAD_GPIO13] = { 0x2b0, 29, 0 }, + [PAD_GPIO14] = { 0x2b4, 0, 0 }, + [PAD_GPIO15] = { 0x2b4, 3, 0 }, + [PAD_GPIO16] = { 0x2b4, 6, 0 }, + [PAD_GPIO17] = { 0x2b4, 9, 0 }, + [PAD_GPIO18] = { 0x2b4, 12, 0 }, + [PAD_GPIO19] = { 0x2b0, 14, 0 }, + [PAD_GPIO20] = { 0x2b0, 17, 0 }, + + [PAD_GPIO21] = { 0x2b4, 21, 1 }, + [PAD_GPIO22] = { 0x2b4, 18, 1 }, + [PAD_GPIO23] = { 0x2b4, 15, 1 }, + [PAD_GPIO24] = { 0x2b0, 11, 1 }, + [PAD_GPIO25] = { 0x2b0, 20, 1 }, + [PAD_GPIO26] = { 0x2b0, 23, 1 }, + [PAD_GPIO27] = { 0x2b0, 26, 1 }, + [PAD_GPIO28] = { 0x2b0, 29, 1 }, + [PAD_GPIO29] = { 0x2b4, 0, 1 }, + [PAD_GPIO30] = { 0x2b4, 3, 1 }, + [PAD_GPIO31] = { 0x2b4, 6, 1 }, + [PAD_GPIO32] = { 0x2b4, 9, 1 }, + [PAD_GPIO33] = { 0x2b4, 12, 1 }, + [PAD_GPIO34] = { 0x2b0, 14, 1 }, + [PAD_GPIO35] = { 0x2b0, 17, 1 }, + + [PAD_GPIO36] = { 0x2b4, 21, 2 }, + [PAD_GPIO37] = { 0x2b4, 18, 2 }, + [PAD_GPIO38] = { 0x2b4, 15, 2 }, + [PAD_GPIO39] = { 0x2b0, 11, 2 }, + [PAD_GPIO40] = { 0x2b0, 20, 2 }, + [PAD_GPIO41] = { 0x2b0, 23, 2 }, + [PAD_GPIO42] = { 0x2b0, 26, 2 }, + [PAD_GPIO43] = { 0x2b0, 29, 2 }, + [PAD_GPIO44] = { 0x2b4, 0, 2 }, + [PAD_GPIO45] = { 0x2b4, 3, 2 }, + [PAD_GPIO46] = { 0x2b4, 6, 2 }, + [PAD_GPIO47] = { 0x2b4, 9, 2 }, + [PAD_GPIO48] = { 0x2b4, 12, 2 }, + [PAD_GPIO49] = { 0x2b0, 14, 2 }, + [PAD_GPIO50] = { 0x2b0, 17, 2 }, +}; + +static void jh7110_set_function(struct udevice *dev, + unsigned int pin, u32 func) +{ + const struct jh7110_func_sel *fs = &jh7110_sys_func_sel[pin]; + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + void __iomem *reg; + u32 mask; + + if (!fs->offset) + return; + + if (func > fs->max) + return; + + reg = priv->base + fs->offset; + func = func << fs->shift; + mask = 0x3U << fs->shift; + + func |= readl(reg) & ~mask; + writel(func, reg); +} + +static void jh7110_set_vin_group(struct udevice *dev, unsigned int pin) +{ + const struct jh7110_vin_group_sel *gs = + &jh7110_sys_vin_group_sel[pin]; + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + void __iomem *reg; + u32 mask; + u32 grp; + + if (!gs->offset) + return; + + reg = priv->base + gs->offset; + grp = gs->group << gs->shift; + mask = 0x3U << gs->shift; + + grp |= readl(reg) & ~mask; + writel(grp, reg); +} + +static int jh7110_sys_set_one_pin_mux(struct udevice *dev, unsigned int pin, + unsigned int din, u32 dout, u32 doen, u32 func) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + + if (pin < priv->info->ngpios && func == 0) + starfive_set_gpiomux(dev, pin, din, dout, doen); + + jh7110_set_function(dev, pin, func); + + if (pin < priv->info->ngpios && func == 2) + jh7110_set_vin_group(dev, pin); + + return 0; +} + +static int jh7110_sys_get_padcfg_base(struct udevice *dev, + unsigned int pin) +{ + if (pin < PAD_GMAC1_MDC) + return SYS_GPO_PDA_0_74_CFG; + else if (pin > PAD_GMAC1_TXC && pin <= PAD_QSPI_DATA3) + return SYS_GPO_PDA_89_94_CFG; + else + return -1; +} + +static void jh7110_sys_init_hw(struct udevice *dev) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + + /* mask all GPIO interrupts */ + writel(0U, priv->base + JH7110_SYS_GPIOIE0); + writel(0U, priv->base + JH7110_SYS_GPIOIE1); + /* clear edge interrupt flags */ + writel(~0U, priv->base + JH7110_SYS_GPIOIC0); + writel(~0U, priv->base + JH7110_SYS_GPIOIC1); + /* enable GPIO interrupts */ + writel(1U, priv->base + JH7110_SYS_GPIOEN); +} + +const struct starfive_pinctrl_soc_info jh7110_sys_pinctrl_info = { + /* pin conf */ + .set_one_pinmux = jh7110_sys_set_one_pin_mux, + .get_padcfg_base = jh7110_sys_get_padcfg_base, + + /* gpio dout/doen/din/gpioinput register */ + .dout_reg_base = JH7110_SYS_DOUT, + .dout_mask = GENMASK(6, 0), + .doen_reg_base = JH7110_SYS_DOEN, + .doen_mask = GENMASK(5, 0), + .gpi_reg_base = JH7110_SYS_GPI, + .gpi_mask = GENMASK(6, 0), + .gpioin_reg_base = JH7110_SYS_GPIOIN, + + /* gpio */ + .gpio_bank_name = "GPIO", + .ngpios = JH7110_SYS_NGPIO, + .gpio_init_hw = jh7110_sys_init_hw, +}; + +static int jh7110_sys_pinctrl_probe(struct udevice *dev) +{ + struct starfive_pinctrl_soc_info *info = + (struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev); + + return starfive_pinctrl_probe(dev, info); +} + +static const struct udevice_id jh7110_sys_pinctrl_ids[] = { + /* JH7110 sys pinctrl */ + { .compatible = "starfive,jh7110-sys-pinctrl", + .data = (ulong)&jh7110_sys_pinctrl_info, }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(jh7110_sys_pinctrl) = { + .name = "jh7110-sys-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = jh7110_sys_pinctrl_ids, + .priv_auto = sizeof(struct starfive_pinctrl_priv), + .ops = &starfive_pinctrl_ops, + .probe = jh7110_sys_pinctrl_probe, +}; diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.c b/drivers/pinctrl/starfive/pinctrl-starfive.c new file mode 100644 index 0000000000..1be9f36bb3 --- /dev/null +++ b/drivers/pinctrl/starfive/pinctrl-starfive.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl / GPIO driver for StarFive JH7100 SoC + * + * Copyright (C) 2022 Shanghai StarFive Technology Co., Ltd. + * Author: Lee Kuan Lim kuanlim.lee@starfivetech.com + * Author: Jianlong Huang jianlong.huang@starfivetech.com + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/pinctrl.h> +#include <asm-generic/gpio.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <dm/device_compat.h> +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> + +#include "pinctrl-starfive.h" + +/* pad control bits */ +#define STARFIVE_PADCFG_POS BIT(7) +#define STARFIVE_PADCFG_SMT BIT(6) +#define STARFIVE_PADCFG_SLEW BIT(5) +#define STARFIVE_PADCFG_PD BIT(4) +#define STARFIVE_PADCFG_PU BIT(3) +#define STARFIVE_PADCFG_BIAS (STARFIVE_PADCFG_PD | STARFIVE_PADCFG_PU) +#define STARFIVE_PADCFG_DS_MASK GENMASK(2, 1) +#define STARFIVE_PADCFG_DS_2MA (0U << 1) +#define STARFIVE_PADCFG_DS_4MA BIT(1) +#define STARFIVE_PADCFG_DS_8MA (2U << 1) +#define STARFIVE_PADCFG_DS_12MA (3U << 1) +#define STARFIVE_PADCFG_IE BIT(0) +#define GPIO_NUM_PER_WORD 32 + +/* + * The packed pinmux values from the device tree look like this: + * + * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 | + * | din | dout | doen | function | pin | + */ +static unsigned int starfive_pinmux_din(u32 v) +{ + return (v & GENMASK(31, 24)) >> 24; +} + +static u32 starfive_pinmux_dout(u32 v) +{ + return (v & GENMASK(23, 16)) >> 16; +} + +static u32 starfive_pinmux_doen(u32 v) +{ + return (v & GENMASK(15, 10)) >> 10; +} + +static u32 starfive_pinmux_function(u32 v) +{ + return (v & GENMASK(9, 8)) >> 8; +} + +static unsigned int starfive_pinmux_pin(u32 v) +{ + return v & GENMASK(7, 0); +} + +void starfive_set_gpiomux(struct udevice *dev, unsigned int pin, + unsigned int din, u32 dout, u32 doen) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + const struct starfive_pinctrl_soc_info *info = priv->info; + + unsigned int offset = 4 * (pin / 4); + unsigned int shift = 8 * (pin % 4); + u32 dout_mask = info->dout_mask << shift; + u32 done_mask = info->doen_mask << shift; + u32 ival, imask; + void __iomem *reg_dout; + void __iomem *reg_doen; + void __iomem *reg_din; + + reg_dout = priv->base + info->dout_reg_base + offset; + reg_doen = priv->base + info->doen_reg_base + offset; + dout <<= shift; + doen <<= shift; + if (din != GPI_NONE) { + unsigned int ioffset = 4 * (din / 4); + unsigned int ishift = 8 * (din % 4); + + reg_din = priv->base + info->gpi_reg_base + ioffset; + ival = (pin + 2) << ishift; + imask = info->gpi_mask << ishift; + } else { + reg_din = NULL; + } + + dout |= readl(reg_dout) & ~dout_mask; + writel(dout, reg_dout); + doen |= readl(reg_doen) & ~done_mask; + writel(doen, reg_doen); + if (reg_din) { + ival |= readl(reg_din) & ~imask; + writel(ival, reg_din); + } +} + +static const struct pinconf_param starfive_pinconf_params[] = { + { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, + { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, + { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, + { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, + { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, + { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, + { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 }, + { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 }, + { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, +}; + +static const u8 starfive_drive_strength_mA[4] = { 2, 4, 8, 12 }; + +static u32 starfive_padcfg_ds_from_mA(u32 v) +{ + int i; + + for (i = 0; i < 3; i++) { + if (v <= starfive_drive_strength_mA[i]) + break; + } + return i << 1; +} + +static void starfive_padcfg_rmw(struct udevice *dev, + unsigned int pin, u32 mask, u32 value) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + struct starfive_pinctrl_soc_info *info = priv->info; + void __iomem *reg; + int padcfg_base; + + if (!info->get_padcfg_base) + return; + + padcfg_base = info->get_padcfg_base(dev, pin); + if (padcfg_base < 0) + return; + + reg = priv->base + padcfg_base + 4 * pin; + value &= mask; + + value |= readl(reg) & ~mask; + writel(value, reg); +} + +static int starfive_pinconf_set(struct udevice *dev, unsigned int pin, + unsigned int param, unsigned int arg) +{ + u16 mask = 0; + u16 value = 0; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + mask |= STARFIVE_PADCFG_BIAS; + value &= ~STARFIVE_PADCFG_BIAS; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + if (arg == 0) + return -EINVAL; + mask |= STARFIVE_PADCFG_BIAS; + value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PD; + break; + case PIN_CONFIG_BIAS_PULL_UP: + if (arg == 0) + return -EINVAL; + mask |= STARFIVE_PADCFG_BIAS; + value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PU; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + mask |= STARFIVE_PADCFG_DS_MASK; + value = (value & ~STARFIVE_PADCFG_DS_MASK) | + starfive_padcfg_ds_from_mA(arg); + break; + case PIN_CONFIG_INPUT_ENABLE: + mask |= STARFIVE_PADCFG_IE; + if (arg) + value |= STARFIVE_PADCFG_IE; + else + value &= ~STARFIVE_PADCFG_IE; + break; + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + mask |= STARFIVE_PADCFG_SMT; + if (arg) + value |= STARFIVE_PADCFG_SMT; + else + value &= ~STARFIVE_PADCFG_SMT; + break; + case PIN_CONFIG_SLEW_RATE: + mask |= STARFIVE_PADCFG_SLEW; + if (arg) + value |= STARFIVE_PADCFG_SLEW; + else + value &= ~STARFIVE_PADCFG_SLEW; + break; + default: + return -EINVAL; + } + + starfive_padcfg_rmw(dev, pin, mask, value); + + return 0; +} + +static int starfive_property_set(struct udevice *dev, u32 pinmux_group) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + struct starfive_pinctrl_soc_info *info = priv->info; + + if (info->set_one_pinmux) + info->set_one_pinmux(dev, + starfive_pinmux_pin(pinmux_group), + starfive_pinmux_din(pinmux_group), + starfive_pinmux_dout(pinmux_group), + starfive_pinmux_doen(pinmux_group), + starfive_pinmux_function(pinmux_group)); + + return starfive_pinmux_pin(pinmux_group); +} + +const struct pinctrl_ops starfive_pinctrl_ops = { + .set_state = pinctrl_generic_set_state, + .pinconf_num_params = ARRAY_SIZE(starfive_pinconf_params), + .pinconf_params = starfive_pinconf_params, + .pinconf_set = starfive_pinconf_set, + .pinmux_property_set = starfive_property_set, +}; + +static int starfive_gpio_direction_input(struct udevice *dev, unsigned int off) +{ + struct udevice *pdev = dev->parent; + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + struct starfive_pinctrl_soc_info *info = priv->info; + + /* enable input and schmitt trigger */ + starfive_padcfg_rmw(pdev, off, + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT, + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT); + + if (info->set_one_pinmux) + info->set_one_pinmux(pdev, off, + GPI_NONE, GPOUT_LOW, GPOEN_DISABLE, 0); + + return 0; +} + +static int starfive_gpio_direction_output(struct udevice *dev, + unsigned int off, int val) +{ + struct udevice *pdev = dev->parent; + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + struct starfive_pinctrl_soc_info *info = priv->info; + + if (info->set_one_pinmux) + info->set_one_pinmux(pdev, off, + GPI_NONE, val ? GPOUT_HIGH : GPOUT_LOW, + GPOEN_ENABLE, 0); + + /* disable input, schmitt trigger and bias */ + starfive_padcfg_rmw(pdev, off, + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT + | STARFIVE_PADCFG_BIAS, + 0); + + return 0; +} + +static int starfive_gpio_get_value(struct udevice *dev, unsigned int off) +{ + struct udevice *pdev = dev->parent; + struct starfive_pinctrl_priv *priv = dev_get_priv(pdev); + struct starfive_pinctrl_soc_info *info = priv->info; + + void __iomem *reg = priv->base + info->gpioin_reg_base + + 4 * (off / GPIO_NUM_PER_WORD); + + return !!(readl(reg) & BIT(off % GPIO_NUM_PER_WORD)); +} + +static int starfive_gpio_set_value(struct udevice *dev, + unsigned int off, int val) +{ + struct udevice *pdev = dev->parent; + struct starfive_pinctrl_priv *priv = dev_get_priv(pdev); + struct starfive_pinctrl_soc_info *info = priv->info; + + unsigned int offset = 4 * (off / 4); + unsigned int shift = 8 * (off % 4); + void __iomem *reg_dout = priv->base + info->dout_reg_base + offset; + u32 dout = (val ? GPOUT_HIGH : GPOUT_LOW) << shift; + u32 mask = info->dout_mask << shift; + + dout |= readl(reg_dout) & ~mask; + writel(dout, reg_dout); + + return 0; +} + +static int starfive_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv; + struct udevice *pdev = dev->parent; + struct starfive_pinctrl_priv *priv = dev_get_priv(pdev); + struct starfive_pinctrl_soc_info *info = priv->info; + + uc_priv = dev_get_uclass_priv(dev); + uc_priv->bank_name = info->gpio_bank_name; + uc_priv->gpio_count = info->ngpios; + + if (!info->gpio_init_hw) + return -ENXIO; + + info->gpio_init_hw(pdev); + + return 0; +} + +static const struct dm_gpio_ops starfive_gpio_ops = { + .direction_input = starfive_gpio_direction_input, + .direction_output = starfive_gpio_direction_output, + .get_value = starfive_gpio_get_value, + .set_value = starfive_gpio_set_value, +}; + +static struct driver starfive_gpio_driver = { + .name = "starfive_gpio", + .id = UCLASS_GPIO, + .probe = starfive_gpio_probe, + .ops = &starfive_gpio_ops, +}; + +static int starfive_gpiochip_register(struct udevice *parent) +{ + struct uclass_driver *drv; + struct udevice *dev; + int ret; + ofnode node; + + drv = lists_uclass_lookup(UCLASS_GPIO); + if (!drv) + return -ENOENT; + + node = dev_ofnode(parent); + ret = device_bind_with_driver_data(parent, &starfive_gpio_driver, + "starfive_gpio", 0, node, &dev); + + return (ret == 0) ? 0 : ret; +} + +int starfive_pinctrl_probe(struct udevice *dev, + const struct starfive_pinctrl_soc_info *info) +{ + struct starfive_pinctrl_priv *priv = dev_get_priv(dev); + int ret; + + /* Bind pinctrl_info from .data to priv */ + priv->info = + (struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev); + + if (!priv->info) + return -EINVAL; + + priv->base = dev_read_addr_ptr(dev); + if (!priv->base) + return -EINVAL; + + /* gpiochip register */ + ret = starfive_gpiochip_register(dev); + + return (ret == 0) ? 0 : ret; +} diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.h b/drivers/pinctrl/starfive/pinctrl-starfive.h new file mode 100644 index 0000000000..5721c3c36e --- /dev/null +++ b/drivers/pinctrl/starfive/pinctrl-starfive.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Pinctrl / GPIO driver for StarFive SoC + * + * Copyright (C) 2022 Shanghai StarFive Technology Co., Ltd. + * Author: Lee Kuan Lim kuanlim.lee@starfivetech.com + * Author: Jianlong Huang jianlong.huang@starfivetech.com + */ + +#define STARFIVE_PINCTRL(a, b) { .number = a, .name = b } + +extern const struct pinctrl_ops starfive_pinctrl_ops; + +struct starfive_pinctrl_pin { + unsigned int number; + const char *name; +}; + +struct starfive_pinctrl_soc_info { + /* pinctrl */ + int (*set_one_pinmux)(struct udevice *dev, unsigned int pin, + unsigned int din, u32 dout, u32 doen, u32 func); + int (*get_padcfg_base)(struct udevice *dev, + unsigned int pin); + + /* gpio dout/doen/din/gpioinput register */ + unsigned int dout_reg_base; + unsigned int dout_mask; + unsigned int doen_reg_base; + unsigned int doen_mask; + unsigned int gpi_reg_base; + unsigned int gpi_mask; + unsigned int gpioin_reg_base; + + /* gpio */ + const char *gpio_bank_name; + int ngpios; + void (*gpio_init_hw)(struct udevice *dev); +}; + +/* + * struct starfive_pinctrl_priv - private data for Starfive pinctrl driver + * + * @padctl_base: base address of the pinctrl device + * @info: SoC specific data & function + */ +struct starfive_pinctrl_priv { + void __iomem *base; + struct starfive_pinctrl_soc_info *info; +}; + +void starfive_set_gpiomux(struct udevice *dev, unsigned int pin, + unsigned int din, u32 dout, u32 doen); +int starfive_pinctrl_probe(struct udevice *dev, + const struct starfive_pinctrl_soc_info *info);