It doesn't make much sense to have two separate configs for the riotboard so let's merge the SPL config into the main one for less duplication.
Signed-off-by: Peter Robinson pbrobinson@gmail.com Cc: "Eric Bénard" eric@eukrea.com Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Stefano Babic sbabic@denx.de --- configs/riotboard_defconfig | 14 ++++++- configs/riotboard_spl_defconfig | 70 --------------------------------- 2 files changed, 13 insertions(+), 71 deletions(-) delete mode 100644 configs/riotboard_spl_defconfig
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index b652057d74..074c0d5b44 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -1,18 +1,29 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x60000 CONFIG_MX6S=y CONFIG_TARGET_EMBESTMX6BOARDS=y +CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,DDR_MB=1024" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SPL,DDR_MB=1024" CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_OS_BOOT=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -57,3 +68,4 @@ CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_OF_LIBFDT=y +CONFIG_SPL_OF_LIBFDT=y diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig deleted file mode 100644 index 95549ff5b7..0000000000 --- a/configs/riotboard_spl_defconfig +++ /dev/null @@ -1,70 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_MX6S=y -CONFIG_TARGET_EMBESTMX6BOARDS=y -CONFIG_SPL_TEXT_BASE=0x00908000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SPL,DDR_MB=1024" -CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SYS_MMC_ENV_DEV=2 -CONFIG_DM=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_ATHEROS=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_DM_THERMAL=y -CONFIG_IMX_THERMAL=y -CONFIG_USB=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_DM_VIDEO=y -# CONFIG_BACKLIGHT is not set -# CONFIG_CMD_VIDCONSOLE is not set -# CONFIG_VIDEO_BPP8 is not set -# CONFIG_VIDEO_BPP32 is not set -# CONFIG_VIDEO_ANSI is not set -CONFIG_SYS_WHITE_ON_BLACK=y -# CONFIG_PANEL is not set -CONFIG_VIDEO_IPUV3=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_OF_LIBFDT=y -CONFIG_SPL_OF_LIBFDT=y