Used a script to recheck/verify pin mapping and existing mapping appears to be fine, returning correct bank and pin values. Did ./MAKEALL -a arm and found all Exynos/S5P related boards compiled successfully. Couldn't test booting over all of them. Tested U-Boot bootup over SMDK5420, SMDK5250, Snow. Requesting maintaners to please test over affected SoCs/boards.
Changes in V2: - Enabled CMD_GPIO as suggested by Simon Glass and supported same for EXYNOS5. Changes in V3: - New patch added to rename S5P GPIO definitions to S5P_GPIO. - GPIO Table added to calculate the base address of input gpio bank. Changes in V4: - To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. - Function and table to support gpio command moved to s5p-gpio driver. - Rebased on latest u-boot-samsung tree. Changes in V5: - Rebased on latest u-boot-samsung tree. - Removed Exynos5 specific code in gpio driver api to get bank. - Added #define HAVE_GENERIC_GPIO in config file to remove conditinal CPU check in gpio driver. Changes in V6: - Isolated config changes in a new patch. - Updated patches with corresponding changes for Exynos 5420. Changes in V7: - Added changes for other SoCs like Exynos 4412, 4210 etc. Changes in V8: - Changed Subject of patch 2/2 to reflect affected SoCs/boards. - Fixed arndale board compile time errors introduced due to patch-set v7. Changes in V9: - Fixed checkpatch errors. - Fixed naming error in exynosxxxx_gpio_data arrays which could be the possible reason behind data abort witnessed over Exynos4 boards. Changes in v10: - Made arch-exynos/gpio.h -> arch/gpio.h. - Removed dead code. - Replaced exynos_gpio_get calls with corresponding pin number. - Edited pin numbmers in dts files. Changes in v11: - Created and fixed pinmux_config for Exynos 4412. - Removed dead code. Changes in v12: - Added change logs in individual patches. - Fixed few bugs and typos. - Added "Acked-by: Przemyslaw Marczak".
Akshay Saraswat (2): S5P: Exynos: Add GPIO pin numbering and rename definitions S5P: Exynos: Config: Enable GPIO CMD config
arch/arm/cpu/armv7/exynos/pinmux.c | 561 +++++---- arch/arm/dts/exynos4210-origen.dts | 4 +- arch/arm/dts/exynos4210-trats.dts | 6 +- arch/arm/dts/exynos4210-universal_c210.dts | 4 +- arch/arm/dts/exynos4412-trats2.dts | 4 +- arch/arm/include/asm/arch-exynos/cpu.h | 17 +- arch/arm/include/asm/arch-exynos/gpio.h | 1761 +++++++++++++++++++++++----- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 948 ++++++++++++--- board/samsung/arndale/arndale.c | 11 +- board/samsung/goni/goni.c | 32 +- board/samsung/smdk5250/exynos5-dt.c | 20 +- board/samsung/smdk5250/smdk5250.c | 19 +- board/samsung/smdk5420/smdk5420.c | 15 +- board/samsung/smdkc100/smdkc100.c | 5 +- board/samsung/smdkv310/smdkv310.c | 19 +- board/samsung/trats/trats.c | 39 +- board/samsung/trats2/trats2.c | 74 +- board/samsung/universal_c210/universal.c | 51 +- drivers/gpio/s5p_gpio.c | 204 +++- include/configs/exynos5-dt.h | 2 + include/configs/s5p_goni.h | 4 +- include/configs/s5pc210_universal.h | 16 +- include/configs/smdkv310.h | 1 + include/configs/trats.h | 8 +- include/configs/trats2.h | 4 +- 25 files changed, 2918 insertions(+), 911 deletions(-)