Re: [PATCH v2 5/8] phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY

On Mon, Feb 26, 2024 at 2:05 AM Sumit Garg sumit.garg@linaro.org wrote:

Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe PHY initialization moved to this standalone PHY driver.

Inspired from counterpart Linux kernel v6.8-rc3 driver: drivers/phy/freescale/phy-fsl-imx8m-pcie.c.

I have a PCIe device that works just fine in Linux. I have applied your series an enabled the same config options as you did along with some others to resolve some build issues.

Any ideas how to address:

nxp_imx8_pcie_phy pcie-phy@32f00000: PHY: Failed to power on pcie-phy@32f00000: -110.

My PHY node looks like this

&pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; clocks = <&pcie0_refclk>; clock-names = "ref"; status = "okay"; };

The pcie_refcllk is defined as a 100MHz fixed clock in U-Boot. clk dump shows it to be:

100000000 0 |-- clock-pcie

Signed-off-by: Sumit Garg sumit.garg@linaro.org

drivers/phy/Kconfig | 9 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-imx8m-pcie.c | 269 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/phy/phy-imx8m-pcie.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 60138beca498..110ec8f5008d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -284,6 +284,15 @@ config PHY_IMX8MQ_USB help Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC

+config PHY_IMX8M_PCIE

•   bool "NXP i.MX8MM/i.MX8MP PCIe PHY Driver"
  

•   depends on PHY
  

•   depends on IMX8MM || IMX8MP
  

This should also depend on SYSCON and REGMAP to prevent build errors.

•   help
  

•     Support the PCIe PHY in NXP i.MX8MM or i.MX8MP SoC
  

•     This PHY is found on i.MX8M devices supporting PCIe.
  

config PHY_XILINX_ZYNQMP tristate "Xilinx ZynqMP PHY driver" depends on PHY && ARCH_ZYNQMP diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 2e8723186c05..7a2b764492be 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_NPCM_USB) += phy-npcm-usb.o obj-$(CONFIG_PHY_IMX8MQ_USB) += phy-imx8mq-usb.o +obj-$(CONFIG_PHY_IMX8M_PCIE) += phy-imx8m-pcie.o obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o obj-y += cadence/ obj-y += ti/ diff --git a/drivers/phy/phy-imx8m-pcie.c b/drivers/phy/phy-imx8m-pcie.c new file mode 100644 index 000000000000..e09a7ac97235 --- /dev/null +++ b/drivers/phy/phy-imx8m-pcie.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*

• • Copyright 2024 Linaro Ltd.
• • Derived from Linux counterpart driver
• */

+#include <asm/io.h> +#include <clk.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <generic-phy.h> +#include <linux/bitfield.h> +#include <linux/clk-provider.h> +#include <linux/iopoll.h> +#include <syscon.h> +#include <regmap.h> +#include <reset.h>

+#include <dt-bindings/phy/phy-imx8-pcie.h>

+#define IMX8MM_PCIE_PHY_CMN_REG061 0x184 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_EN BIT(0) +#define IMX8MM_PCIE_PHY_CMN_REG062 0x188 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_SEL BIT(3) +#define IMX8MM_PCIE_PHY_CMN_REG063 0x18C +#define AUX_PLL_REFCLK_SEL_SYS_PLL GENMASK(7, 6) +#define IMX8MM_PCIE_PHY_CMN_REG064 0x190 +#define ANA_AUX_RX_TX_SEL_TX BIT(7) +#define ANA_AUX_RX_TERM_GND_EN BIT(3) +#define ANA_AUX_TX_TERM BIT(2) +#define IMX8MM_PCIE_PHY_CMN_REG065 0x194 +#define ANA_AUX_RX_TERM (BIT(7) | BIT(4)) +#define ANA_AUX_TX_LVL GENMASK(3, 0) +#define IMX8MM_PCIE_PHY_CMN_REG075 0x1D4 +#define ANA_PLL_DONE 0x3 +#define PCIE_PHY_TRSV_REG5 0x414 +#define PCIE_PHY_TRSV_REG6 0x418

+#define IMX8MM_GPR_PCIE_REF_CLK_SEL GENMASK(25, 24) +#define IMX8MM_GPR_PCIE_REF_CLK_PLL FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3) +#define IMX8MM_GPR_PCIE_REF_CLK_EXT FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x2) +#define IMX8MM_GPR_PCIE_AUX_EN BIT(19) +#define IMX8MM_GPR_PCIE_CMN_RST BIT(18) +#define IMX8MM_GPR_PCIE_POWER_OFF BIT(17) +#define IMX8MM_GPR_PCIE_SSC_EN BIT(16) +#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)

+#define IOMUXC_GPR14_OFFSET 0x38

+enum imx8_pcie_phy_type {

•   IMX8MM,
  

•   IMX8MP,
  

+};

+struct imx8_pcie_phy_drvdata {

•   const   char                    *gpr;
  

•   enum    imx8_pcie_phy_type      variant;
  

+};

+struct imx8_pcie_phy {

•   ulong                   base;
  

•   struct clk              hsio_clk;
  

•   struct regmap           *iomuxc_gpr;
  

•   struct reset_ctl        perst;
  

•   struct reset_ctl        reset;
  

•   u32                     refclk_pad_mode;
  

•   u32                     tx_deemph_gen1;
  

•   u32                     tx_deemph_gen2;
  

•   bool                    clkreq_unused;
  

•   const struct imx8_pcie_phy_drvdata      *drvdata;
  

+};

+static int imx8_pcie_phy_power_on(struct phy *phy) +{

•   int ret;
  

•   u32 val, pad_mode;
  

•   struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev);
  

•   pad_mode = imx8_phy->refclk_pad_mode;
  

•   switch (imx8_phy->drvdata->variant) {
  

•   case IMX8MM:
  

•           reset_assert(&imx8_phy->reset);
  

•           /* Tune PHY de-emphasis setting to pass PCIe compliance. */
  

•           if (imx8_phy->tx_deemph_gen1)
  

•                   writel(imx8_phy->tx_deemph_gen1,
  

•                          imx8_phy->base + PCIE_PHY_TRSV_REG5);
  

•           if (imx8_phy->tx_deemph_gen2)
  

•                   writel(imx8_phy->tx_deemph_gen2,
  

•                          imx8_phy->base + PCIE_PHY_TRSV_REG6);
  

•           break;
  

•   case IMX8MP: /* Do nothing. */
  

•           break;
  

•   }
  

•   if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
  

•       pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
  

•           /* Configure the pad as input */
  

•           val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
  

•           writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
  

•   } else {
  

•           /* Configure the PHY to output the refclock via pad */
  

•           writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
  

•   }
  

•   if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT ||
  

•       pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
  

•           /* Source clock from SoC internal PLL */
  

•           writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062);
  

•           writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
  

•           val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM;
  

•           writel(val | ANA_AUX_RX_TERM_GND_EN,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064);
  

•           writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL,
  

•                  imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
  

•   }
  

•   /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
  

•                      imx8_phy->clkreq_unused ?
  

•                      0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_AUX_EN,
  

•                      IMX8MM_GPR_PCIE_AUX_EN);
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_POWER_OFF, 0);
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_SSC_EN, 0);
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_REF_CLK_SEL,
  

•                      pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
  

•                      IMX8MM_GPR_PCIE_REF_CLK_EXT :
  

•                      IMX8MM_GPR_PCIE_REF_CLK_PLL);
  

•   udelay(200);
  

•   /* Do the PHY common block reset */
  

•   regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
  

•                      IMX8MM_GPR_PCIE_CMN_RST,
  

•                      IMX8MM_GPR_PCIE_CMN_RST);
  

•   switch (imx8_phy->drvdata->variant) {
  

•   case IMX8MP:
  

•           reset_deassert(&imx8_phy->perst);
  

•           fallthrough;
  

•   case IMX8MM:
  

•           reset_deassert(&imx8_phy->reset);
  

•           udelay(500);
  

•           break;
  

•   }
  

•   /* Polling to check the phy is ready or not. */
  

•   ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
  

•                            val, val == ANA_PLL_DONE, 20000);
  

•   return ret;
  

+}

+static int imx8_pcie_phy_init(struct phy *phy) +{

•   struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev);
  

•   return clk_enable(&imx8_phy->hsio_clk);
  

+}

+static int imx8_pcie_phy_exit(struct phy *phy) +{

•   struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev);
  

•   return clk_disable(&imx8_phy->hsio_clk);
  

+}

+static const struct phy_ops imx8_pcie_phy_ops = {

•   .init           = imx8_pcie_phy_init,
  

•   .exit           = imx8_pcie_phy_exit,
  

•   .power_on       = imx8_pcie_phy_power_on,
  

+};

+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {

•   .gpr = "fsl,imx8mm-iomuxc-gpr",
  

•   .variant = IMX8MM,
  

+};

+static const struct imx8_pcie_phy_drvdata imx8mp_drvdata = {

•   .gpr = "fsl,imx8mp-iomuxc-gpr",
  

•   .variant = IMX8MP,
  

+};

+static const struct udevice_id imx8_pcie_phy_of_match[] = {

•   {.compatible = "fsl,imx8mm-pcie-phy", .data = (ulong)&imx8mm_drvdata, },
  

•   {.compatible = "fsl,imx8mp-pcie-phy", .data = (ulong)&imx8mp_drvdata, },
  

•   { },
  

+};

+static int imx8_pcie_phy_probe(struct udevice *dev) +{

•   struct imx8_pcie_phy *imx8_phy = dev_get_priv(dev);
  

•   ofnode gpr;
  

•   int ret = 0;
  

•   imx8_phy->drvdata = (void *)dev_get_driver_data(dev);
  

•   imx8_phy->base = dev_read_addr(dev);
  

•   if (!imx8_phy->base)
  

•           return -EINVAL;
  

•   /* get PHY refclk pad mode */
  

•   dev_read_u32(dev, "fsl,refclk-pad-mode", &imx8_phy->refclk_pad_mode);
  

•   if (dev_read_u32(dev, "fsl,tx-deemph-gen1", &imx8_phy->tx_deemph_gen1))
  

•           imx8_phy->tx_deemph_gen1 = 0;
  

•   if (dev_read_u32(dev, "fsl,tx-deemph-gen2", &imx8_phy->tx_deemph_gen2))
  

•           imx8_phy->tx_deemph_gen2 = 0;
  

•   if (dev_read_bool(dev, "fsl,clkreq-unsupported"))
  

•           imx8_phy->clkreq_unused = true;
  

•   else
  

•           imx8_phy->clkreq_unused = false;
  

•   /* Grab GPR config register range */
  

•   gpr = ofnode_by_compatible(ofnode_null(), imx8_phy->drvdata->gpr);
  

•   if (ofnode_equal(gpr, ofnode_null())) {
  

•           dev_err(dev, "unable to find GPR node\n");
  

•           return -ENODEV;
  

•   }
  

•   imx8_phy->iomuxc_gpr = syscon_node_to_regmap(gpr);
  

•   if (IS_ERR(imx8_phy->iomuxc_gpr)) {
  

•           dev_err(dev, "unable to find iomuxc registers\n");
  

•           return PTR_ERR(imx8_phy->iomuxc_gpr);
  

•   }
  

•   ret = clk_get_by_name(dev, "ref", &imx8_phy->hsio_clk);
  

•   if (ret) {
  

•           dev_err(dev, "Failed to get PCIEPHY ref clock\n");
  

•           return ret;
  

•   }
  

•   ret = reset_get_by_name(dev, "pciephy", &imx8_phy->reset);
  

•   if (ret) {
  

•           dev_err(dev, "Failed to get PCIEPHY reset control\n");
  

•           return ret;
  

•   }
  

•   if (imx8_phy->drvdata->variant == IMX8MP) {
  

•           ret = reset_get_by_name(dev, "perst", &imx8_phy->perst);
  

•           if (ret) {
  

•                   dev_err(dev,
  

•                           "Failed to get PCIEPHY PHY PERST control\n");
  

•                   return ret;
  

•           }
  

•   }
  

•   return 0;
  

+}

+U_BOOT_DRIVER(nxp_imx8_pcie_phy) = {

•   .name = "nxp_imx8_pcie_phy",
  

•   .id = UCLASS_PHY,
  

•   .of_match = imx8_pcie_phy_of_match,
  

•   .probe = imx8_pcie_phy_probe,
  

•   .ops = &imx8_pcie_phy_ops,
  

•   .priv_auto      = sizeof(struct imx8_pcie_phy),
  

+};

2.34.1