-----Original Message----- From: York Sun [mailto:yorksun@freescale.com] Sent: Tuesday, November 24, 2015 12:49 AM To: Kushwaha Prabhakar-B32579 prabhakar@freescale.com; u- boot@lists.denx.de Cc: Srivastava Pratiyush-B46174 pratiyush.srivastava@freescale.com Subject: Re: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect LS2080A
On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote:
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe
endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)
Signed-off-by: Pratiyush Mohan Srivastava pratiyush.srivastava@freescale.com Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com
Changes for v2: Rebased on LS1043 patch set
<snip>
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 2903996..5a91dcb 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -8,8 +8,10 @@ #define _FSL_LAYERSCAPE_CPU_H
static struct cpu_type cpu_type_list[] = {
- CPU_TYPE_ENTRY(LS2085, LS2085, 8),
+#ifdef CONFIG_LS2080A CPU_TYPE_ENTRY(LS2080, LS2080, 8), +#endif
- CPU_TYPE_ENTRY(LS2085, LS2085, 8), CPU_TYPE_ENTRY(LS2045, LS2045, 4), CPU_TYPE_ENTRY(LS1043, LS1043, 4),
};
Why using ifdef here?
I am trying to reduce size of table. Instead of adding all SoC in table only defined the required one at a time.
--prabhakar