The CloudBox device have a different ethernet phy setup than other ns2 devices. Prepare source to use different init registers
Signed-off-by: Frédéric Leroy fredo@starox.org --- board/LaCie/common/common.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c index a62bf9f..85480e7 100644 --- a/board/LaCie/common/common.c +++ b/board/LaCie/common/common.c @@ -21,6 +21,12 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+#if !defined(MII_MARVELL_LED_REG) +# define MII_MARVELL_LED_REG 16 +# define MII_MARVELL_LED_MASK 0xf0 +# define MII_MARVELL_LED_VALUE 0x0f +#endif + void mv_phy_88e1116_init(const char *name, u16 phyaddr) { u16 reg; @@ -53,9 +59,10 @@ void mv_phy_88e1318_init(const char *name, u16 phyaddr) * Set control mode 4 for LED[0]. */ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); - miiphy_read(name, phyaddr, 16, ®); - reg |= 0xf; - miiphy_write(name, phyaddr, 16, reg); + miiphy_read(name, phyaddr, MII_MARVELL_LED_REG, ®); + reg &= MII_MARVELL_LED_MASK; + reg |= MII_MARVELL_LED_VALUE; + miiphy_write(name, phyaddr, MII_MARVELL_LED_REG, reg);
/* * Enable RGMII delay on Tx and Rx for CPU port