This function can be overridden at run-time and allows implementors of new boards based on the i.MX28 chip to fine-tune the memory params. It is possible to write into the dram_vals array because when the SPL runs, it is located SRAM. Therefore the location is writable. There is no possibility of these data to be read-only.
Signed-off-by: Marek Vasut marex@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Detlev Zundel dzu@denx.de Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam festevam@gmail.com --- arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index 9fa5d29..e17a4d7 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c @@ -82,10 +82,18 @@ uint32_t dram_vals[] = { 0x00000000, 0x00010001 };
+void __mx28_adjust_memory_params(uint32_t *dram_vals) +{ +} +void mx28_adjust_memory_params(uint32_t *dram_vals) + __attribute__((weak, alias("__mx28_adjust_memory_params"))); + void init_m28_200mhz_ddr2(void) { int i;
+ mx28_adjust_memory_params(dram_vals); + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); }