As there is no Orion5 based target in mainline U-Boot any more, let's completely remove the support for this pretty old Marvell platform.
Signed-off-by: Stefan Roese sr@denx.de Cc: Tony Dinh mibodhi@gmail.com Cc: Pali Rohár pali@kernel.org Cc: Michael Walle michael@walle.cc --- arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/mach-orion5x/Kconfig | 13 - arch/arm/mach-orion5x/Makefile | 26 -- arch/arm/mach-orion5x/cpu.c | 298 ------------------ arch/arm/mach-orion5x/dram.c | 58 ---- arch/arm/mach-orion5x/include/mach/cpu.h | 242 -------------- .../arm/mach-orion5x/include/mach/mv88f5182.h | 23 -- arch/arm/mach-orion5x/include/mach/orion5x.h | 66 ---- arch/arm/mach-orion5x/lowlevel_init.S | 286 ----------------- arch/arm/mach-orion5x/timer.c | 174 ---------- arch/arm/mach-orion5x/u-boot-spl.lds | 60 ---- drivers/i2c/mvtwsi.c | 4 +- drivers/net/Kconfig | 2 +- drivers/net/mvgbe.c | 2 - drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ehci-marvell.c | 2 - include/configs/mv-common.h | 1 - 18 files changed, 3 insertions(+), 1266 deletions(-) delete mode 100644 arch/arm/mach-orion5x/Kconfig delete mode 100644 arch/arm/mach-orion5x/Makefile delete mode 100644 arch/arm/mach-orion5x/cpu.c delete mode 100644 arch/arm/mach-orion5x/dram.c delete mode 100644 arch/arm/mach-orion5x/include/mach/cpu.h delete mode 100644 arch/arm/mach-orion5x/include/mach/mv88f5182.h delete mode 100644 arch/arm/mach-orion5x/include/mach/orion5x.h delete mode 100644 arch/arm/mach-orion5x/lowlevel_init.S delete mode 100644 arch/arm/mach-orion5x/timer.c delete mode 100644 arch/arm/mach-orion5x/u-boot-spl.lds
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 60f524a2d118..206e34412b3e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -637,13 +637,6 @@ config ARCH_MVEBU select SPI imply CMD_DM
-config ARCH_ORION5X - bool "Marvell Orion" - select CPU_ARM926EJS - select GPIO_EXTRA_HEADER - select SPL_SEPARATE_BSS if SPL - select TIMER - config TARGET_STV0991 bool "Support stv0991" select CPU_V7A @@ -2246,8 +2239,6 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
-source "arch/arm/mach-orion5x/Kconfig" - source "arch/arm/mach-owl/Kconfig"
source "arch/arm/mach-rmobile/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1f4a1d57883b..680c152cae5e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -72,7 +72,6 @@ machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NEXELL) += nexell machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 -machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_OWL) += owl machine-$(CONFIG_ARCH_RMOBILE) += rmobile machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig deleted file mode 100644 index e677211b2e91..000000000000 --- a/arch/arm/mach-orion5x/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if ARCH_ORION5X - -config 88F5182 - bool - -config FEROCEON - bool - -config SYS_SOC - default "orion5x" - - -endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile deleted file mode 100644 index a8b87f6d7103..000000000000 --- a/arch/arm/mach-orion5x/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net -# -# Based on original Kirkwood support which is -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar prafulla@marvell.com - -obj-y = cpu.o -obj-y += dram.o -obj-y += timer.o - -ifndef CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif - -# some files can only build in ARM or THUMB2, not THUMB1 - -ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD -ifndef CONFIG_HAS_THUMB2 - -CFLAGS_cpu.o := -marm - -endif -endif diff --git a/arch/arm/mach-orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c deleted file mode 100644 index ffae9a01e37c..000000000000 --- a/arch/arm/mach-orion5x/cpu.c +++ /dev/null @@ -1,298 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#include <common.h> -#include <cpu_func.h> -#include <init.h> -#include <net.h> -#include <netdev.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <u-boot/md5.h> -#include <asm/arch/cpu.h> - -#define BUFLEN 16 - -void reset_cpu(void) -{ - struct orion5x_cpu_registers *cpureg = - (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE; - - writel(readl(&cpureg->rstoutn_mask) | (1 << 2), - &cpureg->rstoutn_mask); - writel(readl(&cpureg->sys_soft_rst) | 1, - &cpureg->sys_soft_rst); - while (1) - ; -} - -/* - * Compute Window Size field value from size expressed in bytes - * Used with the Base register to set the address window size and location. - * Must be programmed from LSB to MSB as sequence of ones followed by - * sequence of zeros. The number of ones specifies the size of the window in - * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB). - * NOTES: - * 1) A sizeval equal to 0x0 specifies 4 GiB. - * 2) A return value of 0x0 specifies 64 KiB. - */ -unsigned int orion5x_winctrl_calcsize(unsigned int sizeval) -{ - /* - * Calculate the number of 64 KiB blocks needed minus one (rounding up). - * For sizeval > 0 this is equivalent to: - * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1 - */ - sizeval = (sizeval - 1) >> 16; - - /* - * Propagate 'one' bits to the right by 'oring' them. - * We need only treat bits 15-0. - */ - sizeval |= sizeval >> 1; /* 'Or' bit 15 onto bit 14 */ - sizeval |= sizeval >> 2; /* 'Or' bits 15-14 onto bits 13-12 */ - sizeval |= sizeval >> 4; /* 'Or' bits 15-12 onto bits 11-8 */ - sizeval |= sizeval >> 8; /* 'Or' bits 15-8 onto bits 7-0*/ - - return sizeval; -} - -/* - * orion5x_config_adr_windows - Configure address Windows - * - * There are 8 address windows supported by Orion5x Soc to addess different - * devices. Each window can be configured for size, BAR and remap addr - * Below configuration is standard for most of the cases - * - * If remap function not used, remap_lo must be set as base - * - * NOTES: - * - * 1) in order to avoid windows with inconsistent control and base values - * (which could prevent access to BOOTCS and hence execution from FLASH) - * always disable window before writing the base value then reenable it - * by writing the control value. - * - * 2) in order to avoid losing access to BOOTCS when disabling window 7, - * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS, - * then configure windows 6 for its own target. - * - * Reference Documentation: - * Mbus-L to Mbus Bridge Registers Configuration. - * (Sec 25.1 and 25.3 of Datasheet) - */ -int orion5x_config_adr_windows(void) -{ - struct orion5x_win_registers *winregs = - (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE; - -/* Disable window 0, configure it for its intended target, enable it. */ - writel(0, &winregs[0].ctrl); - writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base); - writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo); - writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM, - ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM, - ORION5X_WIN_ENABLE), &winregs[0].ctrl); -/* Disable window 1, configure it for its intended target, enable it. */ - writel(0, &winregs[1].ctrl); - writel(ORION5X_ADR_PCIE_IO, &winregs[1].base); - writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo); - writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO, - ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO, - ORION5X_WIN_ENABLE), &winregs[1].ctrl); -/* Disable window 2, configure it for its intended target, enable it. */ - writel(0, &winregs[2].ctrl); - writel(ORION5X_ADR_PCI_MEM, &winregs[2].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM, - ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM, - ORION5X_WIN_ENABLE), &winregs[2].ctrl); -/* Disable window 3, configure it for its intended target, enable it. */ - writel(0, &winregs[3].ctrl); - writel(ORION5X_ADR_PCI_IO, &winregs[3].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO, - ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO, - ORION5X_WIN_ENABLE), &winregs[3].ctrl); -/* Disable window 4, configure it for its intended target, enable it. */ - writel(0, &winregs[4].ctrl); - writel(ORION5X_ADR_DEV_CS0, &winregs[4].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0, - ORION5X_WIN_ENABLE), &winregs[4].ctrl); -/* Disable window 5, configure it for its intended target, enable it. */ - writel(0, &winregs[5].ctrl); - writel(ORION5X_ADR_DEV_CS1, &winregs[5].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1, - ORION5X_WIN_ENABLE), &winregs[5].ctrl); -/* Disable window 6, configure it for FLASH, enable it. */ - writel(0, &winregs[6].ctrl); - writel(ORION5X_ADR_BOOTROM, &winregs[6].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, - ORION5X_WIN_ENABLE), &winregs[6].ctrl); -/* Disable window 7, configure it for FLASH, enable it. */ - writel(0, &winregs[7].ctrl); - writel(ORION5X_ADR_BOOTROM, &winregs[7].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, - ORION5X_WIN_ENABLE), &winregs[7].ctrl); -/* Disable window 6, configure it for its intended target, enable it. */ - writel(0, &winregs[6].ctrl); - writel(ORION5X_ADR_DEV_CS2, &winregs[6].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2, - ORION5X_WIN_ENABLE), &winregs[6].ctrl); - - return 0; -} - -/* - * Orion5x identification is done through PCIE space. - */ - -u32 orion5x_device_id(void) -{ - return readl(PCIE_DEV_ID_OFF) >> 16; -} - -u32 orion5x_device_rev(void) -{ - return readl(PCIE_DEV_REV_OFF) & 0xff; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) - -/* Display device and revision IDs. - * This function must cover all known device/revision - * combinations, not only the one for which u-boot is - * compiled; this way, one can identify actual HW in - * case of a mismatch. - */ -int print_cpuinfo(void) -{ - char dev_str[7]; /* room enough for 0x0000 plus null byte */ - char rev_str[5]; /* room enough for 0x00 plus null byte */ - char *dev_name = NULL; - char *rev_name = NULL; - - u32 dev = orion5x_device_id(); - u32 rev = orion5x_device_rev(); - - if (dev == MV88F5181_DEV_ID) { - dev_name = "MV88F5181"; - if (rev == MV88F5181_REV_B1) - rev_name = "B1"; - else if (rev == MV88F5181L_REV_A1) { - dev_name = "MV88F5181L"; - rev_name = "A1"; - } else if (rev == MV88F5181L_REV_A0) { - dev_name = "MV88F5181L"; - rev_name = "A0"; - } - } else if (dev == MV88F5182_DEV_ID) { - dev_name = "MV88F5182"; - if (rev == MV88F5182_REV_A2) - rev_name = "A2"; - } else if (dev == MV88F5281_DEV_ID) { - dev_name = "MV88F5281"; - if (rev == MV88F5281_REV_D2) - rev_name = "D2"; - else if (rev == MV88F5281_REV_D1) - rev_name = "D1"; - else if (rev == MV88F5281_REV_D0) - rev_name = "D0"; - } else if (dev == MV88F6183_DEV_ID) { - dev_name = "MV88F6183"; - if (rev == MV88F6183_REV_B0) - rev_name = "B0"; - } - if (dev_name == NULL) { - sprintf(dev_str, "0x%04x", dev); - dev_name = dev_str; - } - if (rev_name == NULL) { - sprintf(rev_str, "0x%02x", rev); - rev_name = rev_str; - } - - printf("SoC: Orion5x %s-%s\n", dev_name, rev_name); - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -#ifdef CONFIG_ARCH_CPU_INIT -int arch_cpu_init(void) -{ - /* Enable and invalidate L2 cache in write through mode */ - invalidate_l2_cache(); - -#ifdef CONFIG_SPL_BUILD - orion5x_config_adr_windows(); -#endif - - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -/* - * SOC specific misc init - */ -#if defined(CONFIG_ARCH_MISC_INIT) -int arch_misc_init(void) -{ - u32 temp; - - /*CPU streaming & write allocate */ - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 28); /* disable wr alloc */ - writefr_extra_feature_reg(temp); - - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 29); /* streaming disabled */ - writefr_extra_feature_reg(temp); - - /* L2Cache settings */ - temp = readfr_extra_feature_reg(); - /* Disable L2C pre fetch - Set bit 24 */ - temp |= (1 << 24); - /* enable L2C - Set bit 22 */ - temp |= (1 << 22); - writefr_extra_feature_reg(temp); - - icache_enable(); - /* Change reset vector to address 0x0 */ - temp = get_cr(); - set_cr(temp & ~CR_V); - - /* Set CPIOs and MPPs - values provided by board - include file */ - writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00); - writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04); - writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50); - writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00); - writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04); - writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c); - - /* initialize timer */ - timer_init_r(); - return 0; -} -#endif /* CONFIG_ARCH_MISC_INIT */ - -#ifdef CONFIG_MVGBE -int cpu_eth_init(struct bd_info *bis) -{ - mvgbe_initialize(bis); - return 0; -} -#endif diff --git a/arch/arm/mach-orion5x/dram.c b/arch/arm/mach-orion5x/dram.c deleted file mode 100644 index c9a3750e48de..000000000000 --- a/arch/arm/mach-orion5x/dram.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#include <common.h> -#include <config.h> -#include <init.h> -#include <asm/arch/cpu.h> -#include <asm/global_data.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * orion5x_sdram_bar - reads SDRAM Base Address Register - */ -u32 orion5x_sdram_bar(enum memory_bank bank) -{ - struct orion5x_ddr_addr_decode_registers *winregs = - (struct orion5x_ddr_addr_decode_registers *) - ORION5X_DRAM_BASE; - - u32 result = 0; - u32 enable = 0x01 & winregs[bank].size; - - if ((!enable) || (bank > BANK3)) - return 0; - - result = winregs[bank].base; - return result; -} -int dram_init (void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size( - (long *) orion5x_sdram_bar(0), - CONFIG_MAX_RAM_BANK_SIZE); - return 0; -} - -int dram_init_banksize(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size( - (long *) (gd->bd->bi_dram[i].start), - CONFIG_MAX_RAM_BANK_SIZE); - } - - return 0; -} diff --git a/arch/arm/mach-orion5x/include/mach/cpu.h b/arch/arm/mach-orion5x/include/mach/cpu.h deleted file mode 100644 index c3ff89669e45..000000000000 --- a/arch/arm/mach-orion5x/include/mach/cpu.h +++ /dev/null @@ -1,242 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirorion5x_ood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#ifndef _ORION5X_CPU_H -#define _ORION5X_CPU_H - -#include <asm/system.h> - -#ifndef __ASSEMBLY__ - -#define ORION5X_CPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \ - | (attr << 8) | (orion5x_winctrl_calcsize(size) << 16)) - -#define ORION5XGBE_PORT_SERIAL_CONTROL1_REG(_x) \ - ((_x ? ORION5X_EGIGA0_BASE : ORION5X_EGIGA1_BASE) + 0x44c) - -enum memory_bank { - BANK0, - BANK1, - BANK2, - BANK3 -}; - -enum orion5x_cpu_winen { - ORION5X_WIN_DISABLE, - ORION5X_WIN_ENABLE -}; - -enum orion5x_cpu_target { - ORION5X_TARGET_DRAM = 0, - ORION5X_TARGET_DEVICE = 1, - ORION5X_TARGET_PCI = 3, - ORION5X_TARGET_PCIE = 4, - ORION5X_TARGET_SASRAM = 9 -}; - -enum orion5x_cpu_attrib { - ORION5X_ATTR_DRAM_CS0 = 0x0e, - ORION5X_ATTR_DRAM_CS1 = 0x0d, - ORION5X_ATTR_DRAM_CS2 = 0x0b, - ORION5X_ATTR_DRAM_CS3 = 0x07, - ORION5X_ATTR_PCI_MEM = 0x59, - ORION5X_ATTR_PCI_IO = 0x51, - ORION5X_ATTR_PCIE_MEM = 0x59, - ORION5X_ATTR_PCIE_IO = 0x51, - ORION5X_ATTR_SASRAM = 0x00, - ORION5X_ATTR_DEV_CS0 = 0x1e, - ORION5X_ATTR_DEV_CS1 = 0x1d, - ORION5X_ATTR_DEV_CS2 = 0x1b, - ORION5X_ATTR_BOOTROM = 0x0f -}; - -/* - * Device Address MAP BAR values - * - * All addresses and sizes not defined by board code - * will be given default values here. - */ - -#if !defined (ORION5X_ADR_PCIE_MEM) -#define ORION5X_ADR_PCIE_MEM 0x90000000 -#endif - -#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_LO) -#define ORION5X_ADR_PCIE_MEM_REMAP_LO 0x90000000 -#endif - -#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_HI) -#define ORION5X_ADR_PCIE_MEM_REMAP_HI 0 -#endif - -#if !defined (ORION5X_SZ_PCIE_MEM) -#define ORION5X_SZ_PCIE_MEM (128*1024*1024) -#endif - -#if !defined (ORION5X_ADR_PCIE_IO) -#define ORION5X_ADR_PCIE_IO 0xf0000000 -#endif - -#if !defined (ORION5X_ADR_PCIE_IO_REMAP_LO) -#define ORION5X_ADR_PCIE_IO_REMAP_LO 0xf0000000 -#endif - -#if !defined (ORION5X_ADR_PCIE_IO_REMAP_HI) -#define ORION5X_ADR_PCIE_IO_REMAP_HI 0 -#endif - -#if !defined (ORION5X_SZ_PCIE_IO) -#define ORION5X_SZ_PCIE_IO (64*1024) -#endif - -#if !defined (ORION5X_ADR_PCI_MEM) -#define ORION5X_ADR_PCI_MEM 0x98000000 -#endif - -#if !defined (ORION5X_SZ_PCI_MEM) -#define ORION5X_SZ_PCI_MEM (128*1024*1024) -#endif - -#if !defined (ORION5X_ADR_PCI_IO) -#define ORION5X_ADR_PCI_IO 0xf0100000 -#endif - -#if !defined (ORION5X_SZ_PCI_IO) -#define ORION5X_SZ_PCI_IO (64*1024) -#endif - -#if !defined (ORION5X_ADR_DEV_CS0) -#define ORION5X_ADR_DEV_CS0 0xfa000000 -#endif - -#if !defined (ORION5X_SZ_DEV_CS0) -#define ORION5X_SZ_DEV_CS0 (2*1024*1024) -#endif - -#if !defined (ORION5X_ADR_DEV_CS1) -#define ORION5X_ADR_DEV_CS1 0xf8000000 -#endif - -#if !defined (ORION5X_SZ_DEV_CS1) -#define ORION5X_SZ_DEV_CS1 (32*1024*1024) -#endif - -#if !defined (ORION5X_ADR_DEV_CS2) -#define ORION5X_ADR_DEV_CS2 0xfa800000 -#endif - -#if !defined (ORION5X_SZ_DEV_CS2) -#define ORION5X_SZ_DEV_CS2 (1*1024*1024) -#endif - -#if !defined (ORION5X_ADR_BOOTROM) -#define ORION5X_ADR_BOOTROM 0xFFF80000 -#endif - -#if !defined (ORION5X_SZ_BOOTROM) -#define ORION5X_SZ_BOOTROM (512*1024) -#endif - -/* - * PCIE registers are used for SoC device ID and revision - */ -#define PCIE_DEV_ID_OFF (ORION5X_REG_PCIE_BASE + 0x0000) -#define PCIE_DEV_REV_OFF (ORION5X_REG_PCIE_BASE + 0x0008) - -/* - * The following definitions are intended for identifying - * the real device and revision on which u-boot is running - * even if it was compiled only for a specific one. Thus, - * these constants must not be considered chip-specific. - */ - -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - -/* - * read feroceon core extra feature register - * using co-proc instruction - */ -static inline unsigned int readfr_extra_feature_reg(void) -{ - unsigned int val; - asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr" : "=r" - (val) : : "cc"); - return val; -} - -/* - * write feroceon core extra feature register - * using co-proc instruction - */ -static inline void writefr_extra_feature_reg(unsigned int val) -{ - asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr" : : "r" - (val) : "cc"); - isb(); -} - -/* - * AHB to Mbus Bridge Registers - * Source: 88F5182 User Manual, Appendix A, section A.4 - * Note: only windows 0 and 1 have remap capability. - */ -struct orion5x_win_registers { - u32 ctrl; - u32 base; - u32 remap_lo; - u32 remap_hi; -}; - -/* - * CPU control and status Registers - * Source: 88F5182 User Manual, Appendix A, section A.4 - */ -struct orion5x_cpu_registers { - u32 config; /*0x20100 */ - u32 ctrl_stat; /*0x20104 */ - u32 rstoutn_mask; /* 0x20108 */ - u32 sys_soft_rst; /* 0x2010C */ - u32 ahb_mbus_cause_irq; /* 0x20110 */ - u32 ahb_mbus_mask_irq; /* 0x20114 */ -}; - -/* - * DDR SDRAM Controller Address Decode Registers - * Source: 88F5182 User Manual, Appendix A, section A.5.1 - */ -struct orion5x_ddr_addr_decode_registers { - u32 base; - u32 size; -}; - -/* - * functions - */ -u32 orion5x_device_id(void); -u32 orion5x_device_rev(void); -unsigned int orion5x_winctrl_calcsize(unsigned int sizeval); -void timer_init_r(void); -#endif /* __ASSEMBLY__ */ -#endif /* _ORION5X_CPU_H */ diff --git a/arch/arm/mach-orion5x/include/mach/mv88f5182.h b/arch/arm/mach-orion5x/include/mach/mv88f5182.h deleted file mode 100644 index 0e9fe0dc51af..000000000000 --- a/arch/arm/mach-orion5x/include/mach/mv88f5182.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirkwood 88F6182 support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - * - * Header file for Feroceon CPU core 88F5182 SOC. - */ - -#ifndef _CONFIG_88F5182_H -#define _CONFIG_88F5182_H - -/* SOC specific definitions */ -#define F88F5182_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_PHY_BASE F88F5182_REGS_PHYS_BASE - -/* TCLK Core Clock defination */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ - -#endif /* _CONFIG_88F5182_H */ diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h deleted file mode 100644 index 4b1b0b0f3716..000000000000 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ /dev/null @@ -1,66 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - * - * Header file for Marvell's Orion SoC with Feroceon CPU core. - */ - -#ifndef _ASM_ARCH_ORION5X_H -#define _ASM_ARCH_ORION5X_H - -#if defined(CONFIG_FEROCEON) - -/* SOC specific definations */ -#define ORION5X_REGISTER(x) (ORION5X_REGS_PHY_BASE + x) - -/* Documented registers */ -#define ORION5X_DRAM_BASE (ORION5X_REGISTER(0x01500)) -#define ORION5X_TWSI_BASE (ORION5X_REGISTER(0x11000)) -#define ORION5X_UART0_BASE (ORION5X_REGISTER(0x12000)) -#define ORION5X_UART1_BASE (ORION5X_REGISTER(0x12100)) -#define ORION5X_MPP_BASE (ORION5X_REGISTER(0x10000)) -#define ORION5X_GPIO_BASE (ORION5X_REGISTER(0x10100)) -#define ORION5X_CPU_WIN_BASE (ORION5X_REGISTER(0x20000)) -#define ORION5X_CPU_REG_BASE (ORION5X_REGISTER(0x20100)) -#define ORION5X_TIMER_BASE (ORION5X_REGISTER(0x20300)) -#define ORION5X_REG_PCI_BASE (ORION5X_REGISTER(0x30000)) -#define ORION5X_REG_PCIE_BASE (ORION5X_REGISTER(0x40000)) -#define ORION5X_USB20_PORT0_BASE (ORION5X_REGISTER(0x50000)) -#define ORION5X_USB20_PORT1_BASE (ORION5X_REGISTER(0xA0000)) -#define ORION5X_EGIGA_BASE (ORION5X_REGISTER(0x72000)) -#define ORION5X_SATA_BASE (ORION5X_REGISTER(0x80000)) -#define ORION5X_SATA_PORT0_OFFSET 0x2000 -#define ORION5X_SATA_PORT1_OFFSET 0x4000 - -/* Orion5x GbE controller has a single port */ -#define MAX_MVGBE_DEVS 1 -#define MVGBE0_BASE ORION5X_EGIGA_BASE - -/* Orion5x USB Host controller is port 1 */ -#define MVUSB0_BASE ORION5X_USB20_HOST_PORT_BASE -#define MVUSB0_CPU_ATTR_DRAM_CS0 ORION5X_ATTR_DRAM_CS0 -#define MVUSB0_CPU_ATTR_DRAM_CS1 ORION5X_ATTR_DRAM_CS1 -#define MVUSB0_CPU_ATTR_DRAM_CS2 ORION5X_ATTR_DRAM_CS2 -#define MVUSB0_CPU_ATTR_DRAM_CS3 ORION5X_ATTR_DRAM_CS3 - -/* Kirkwood CPU memory windows */ -#define MVCPU_WIN_CTRL_DATA ORION5X_CPU_WIN_CTRL_DATA -#define MVCPU_WIN_ENABLE ORION5X_WIN_ENABLE -#define MVCPU_WIN_DISABLE ORION5X_WIN_DISABLE - -#define CONFIG_MAX_RAM_BANK_SIZE (64*1024*1024) - -/* include here SoC variants. 5181, 5281, 6183 should go here when - adding support for them, and this comment should then be updated. */ -#if defined(CONFIG_88F5182) -#include <asm/arch/mv88f5182.h> -#else -#error "SOC Name not defined" -#endif -#endif /* CONFIG_FEROCEON */ -#endif /* _ASM_ARCH_ORION5X_H */ diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S deleted file mode 100644 index aa3fcf7c3010..000000000000 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ /dev/null @@ -1,286 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#include <config.h> -#include "asm/arch/orion5x.h" - -/* - * Configuration values for SDRAM access setup - */ - -#define SDRAM_CONFIG 0x3148400 -#define SDRAM_MODE 0x62 -#define SDRAM_CONTROL 0x4041000 -#define SDRAM_TIME_CTRL_LOW 0x11602220 -#define SDRAM_TIME_CTRL_HI 0x40c -#define SDRAM_OPEN_PAGE_EN 0x0 -/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */ -#define SDRAM_BANK0_SIZE 0x3ff0001 -#define SDRAM_ADDR_CTRL 0x10 - -#define SDRAM_OP_NOP 0x05 -#define SDRAM_OP_SETMODE 0x03 - -#define SDRAM_PAD_CTRL_WR_EN 0x80000000 -#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000 -#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f -#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0 - -/* - * For Guideline MEM-3 - Drive Strength value - */ - -#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000 -#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000 - -/* - * For Guideline MEM-4 - DQS Reference Delay Tuning - */ - -#define MSAR_ARMDDRCLCK_MASK 0x000000f0 -#define MSAR_ARMDDRCLCK_H_MASK 0x00000100 - -#define MSAR_ARMDDRCLCK_333_167 0x00000000 -#define MSAR_ARMDDRCLCK_500_167 0x00000030 -#define MSAR_ARMDDRCLCK_667_167 0x00000060 -#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0 -#define MSAR_ARMDDRCLCK_400_200 0x00000010 -#define MSAR_ARMDDRCLCK_600_200 0x00000050 -#define MSAR_ARMDDRCLCK_800_200 0x00000070 - -#define FTDLL_DDR1_166MHZ 0x0047F001 - -#define FTDLL_DDR1_200MHZ 0x0044D001 - -/* - * Low-level init happens right after start.S has switched to SVC32, - * flushed and disabled caches and disabled MMU. We're still running - * from the boot chip select, so the first thing SPL should do is to - * set up the RAM to copy U-Boot into. - */ - -.globl lowlevel_init - -lowlevel_init: - -#ifdef CONFIG_SPL_BUILD - - /* Use 'r2 as the base for internal register accesses */ - ldr r2, =ORION5X_REGS_PHY_BASE - - /* move internal registers from the default 0xD0000000 - * to their intended location, defined by SoC */ - ldr r3, =0xD0000000 - add r3, r3, #0x20000 - str r2, [r3, #0x80] - - /* Use R3 as the base for DRAM registers */ - add r3, r2, #0x01000 - - /*DDR SDRAM Initialization Control */ - ldr r0, =0x00000001 - str r0, [r3, #0x480] - - /* Use R3 as the base for PCI registers */ - add r3, r2, #0x31000 - - /* Disable arbiter */ - ldr r0, =0x00000030 - str r0, [r3, #0xd00] - - /* Use R3 as the base for DRAM registers */ - add r3, r2, #0x01000 - - /* set all dram windows to 0 */ - mov r0, #0 - str r0, [r3, #0x504] - str r0, [r3, #0x50C] - str r0, [r3, #0x514] - str r0, [r3, #0x51C] - - /* 1) Configure SDRAM */ - ldr r0, =SDRAM_CONFIG - str r0, [r3, #0x400] - - /* 2) Set SDRAM Control reg */ - ldr r0, =SDRAM_CONTROL - str r0, [r3, #0x404] - - /* 3) Write SDRAM address control register */ - ldr r0, =SDRAM_ADDR_CTRL - str r0, [r3, #0x410] - - /* 4) Write SDRAM bank 0 size register */ - ldr r0, =SDRAM_BANK0_SIZE - str r0, [r3, #0x504] - /* keep other banks disabled */ - - /* 5) Write SDRAM open pages control register */ - ldr r0, =SDRAM_OPEN_PAGE_EN - str r0, [r3, #0x414] - - /* 6) Write SDRAM timing Low register */ - ldr r0, =SDRAM_TIME_CTRL_LOW - str r0, [r3, #0x408] - - /* 7) Write SDRAM timing High register */ - ldr r0, =SDRAM_TIME_CTRL_HI - str r0, [r3, #0x40C] - - /* 8) Write SDRAM mode register */ - /* The CPU must not attempt to change the SDRAM Mode register setting */ - /* prior to DRAM controller completion of the DRAM initialization */ - /* sequence. To guarantee this restriction, it is recommended that */ - /* the CPU sets the SDRAM Operation register to NOP command, performs */ - /* read polling until the register is back in Normal operation value, */ - /* and then sets SDRAM Mode register to its new value. */ - - /* 8.1 write 'nop' to SDRAM operation */ - ldr r0, =SDRAM_OP_NOP - str r0, [r3, #0x418] - - /* 8.2 poll SDRAM operation until back in 'normal' mode. */ -1: - ldr r0, [r3, #0x418] - cmp r0, #0 - bne 1b - - /* 8.3 Now its safe to write new value to SDRAM Mode register */ - ldr r0, =SDRAM_MODE - str r0, [r3, #0x41C] - - /* 8.4 Set new mode */ - ldr r0, =SDRAM_OP_SETMODE - str r0, [r3, #0x418] - - /* 8.5 poll SDRAM operation until back in 'normal' mode. */ -2: - ldr r0, [r3, #0x418] - cmp r0, #0 - bne 2b - - /* DDR SDRAM Address/Control Pads Calibration */ - ldr r0, [r3, #0x4C0] - - /* Set Bit [31] to make the register writable */ - orr r0, r0, #SDRAM_PAD_CTRL_WR_EN - str r0, [r3, #0x4C0] - - bic r0, r0, #SDRAM_PAD_CTRL_WR_EN - bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN - bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK - bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK - - /* Get the final N locked value of driving strength [22:17] */ - mov r1, r0 - mov r1, r1, LSL #9 - mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */ - orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */ - - /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */ - orr r0, r0, r1 - str r0, [r3, #0x4C0] - - /* DDR SDRAM Data Pads Calibration */ - ldr r0, [r3, #0x4C4] - - /* Set Bit [31] to make the register writable */ - orr r0, r0, #SDRAM_PAD_CTRL_WR_EN - str r0, [r3, #0x4C4] - - bic r0, r0, #SDRAM_PAD_CTRL_WR_EN - bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN - bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK - bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK - - /* Get the final N locked value of driving strength [22:17] */ - mov r1, r0 - mov r1, r1, LSL #9 - mov r1, r1, LSR #26 - orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */ - - /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */ - orr r0, r0, r1 - - str r0, [r3, #0x4C4] - - /* Implement Guideline (GL# MEM-3) Drive Strength Value */ - /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ - - ldr r1, =DDR1_PAD_STRENGTH_DEFAULT - - /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */ - ldr r0, [r3, #0x4C0] - orr r0, r0, #SDRAM_PAD_CTRL_WR_EN - str r0, [r3, #0x4C0] - - /* Correct strength and disable writes again */ - bic r0, r0, #SDRAM_PAD_CTRL_WR_EN - bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK - orr r0, r0, r1 - str r0, [r3, #0x4C0] - - /* Enable writes to DDR SDRAM Data Pads Calibration register */ - ldr r0, [r3, #0x4C4] - orr r0, r0, #SDRAM_PAD_CTRL_WR_EN - str r0, [r3, #0x4C4] - - /* Correct strength and disable writes again */ - bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK - bic r0, r0, #SDRAM_PAD_CTRL_WR_EN - orr r0, r0, r1 - str r0, [r3, #0x4C4] - - /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */ - /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ - - /* Get the "sample on reset" register for the DDR frequancy */ - ldr r3, =0x10000 - ldr r0, [r3, #0x010] - ldr r1, =MSAR_ARMDDRCLCK_MASK - and r1, r0, r1 - - ldr r0, =FTDLL_DDR1_166MHZ - cmp r1, #MSAR_ARMDDRCLCK_333_167 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_500_167 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_667_167 - beq 3f - - ldr r0, =FTDLL_DDR1_200MHZ - cmp r1, #MSAR_ARMDDRCLCK_400_200_1 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_400_200 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_600_200 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_800_200 - beq 3f - - ldr r0, =0 - -3: - /* Use R3 as the base for DRAM registers */ - add r3, r2, #0x01000 - - ldr r2, [r3, #0x484] - orr r2, r2, r0 - str r2, [r3, #0x484] - - /* enable for 2 GB DDR; detection should find out real amount */ - sub r0, r0, r0 - str r0, [r3, #0x500] - ldr r0, =0x7fff0001 - str r0, [r3, #0x504] - -#endif /* CONFIG_SPL_BUILD */ - - /* Return to U-Boot via saved link register */ - mov pc, lr diff --git a/arch/arm/mach-orion5x/timer.c b/arch/arm/mach-orion5x/timer.c deleted file mode 100644 index d7ea2e3943fc..000000000000 --- a/arch/arm/mach-orion5x/timer.c +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on original Kirkwood support which is - * Copyright (C) Marvell International Ltd. and its affiliates - * Written-by: Prafulla Wadaskar prafulla@marvell.com - */ - -#include <common.h> -#include <init.h> -#include <time.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <linux/delay.h> - -#define UBOOT_CNTR 0 /* counter to use for uboot timer */ - -/* Timer reload and current value registers */ -struct orion5x_tmr_val { - u32 reload; /* Timer reload reg */ - u32 val; /* Timer value reg */ -}; - -/* Timer registers */ -struct orion5x_tmr_registers { - u32 ctrl; /* Timer control reg */ - u32 pad[3]; - struct orion5x_tmr_val tmr[2]; - u32 wdt_reload; - u32 wdt_val; -}; - -struct orion5x_tmr_registers *orion5x_tmr_regs = - (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE; - -/* - * ARM Timers Registers Map - */ -#define CNTMR_CTRL_REG (&orion5x_tmr_regs->ctrl) -#define CNTMR_RELOAD_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].reload) -#define CNTMR_VAL_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].val) - -/* - * ARM Timers Control Register - * CPU_TIMERS_CTRL_REG (CTCR) - */ -#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) -#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) -#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) -#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) - -#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) -#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1) -#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) - -/* - * ARM Timer\Watchdog Reload Register - * CNTMR_RELOAD_REG (TRR) - */ -#define TRG_ARM_TIMER_REL_OFFS 0 -#define TRG_ARM_TIMER_REL_MASK 0xffffffff - -/* - * ARM Timer\Watchdog Register - * CNTMR_VAL_REG (TVRG) - */ -#define TVR_ARM_TIMER_OFFS 0 -#define TVR_ARM_TIMER_MASK 0xffffffff -#define TVR_ARM_TIMER_MAX 0xffffffff -#define TIMER_LOAD_VAL 0xffffffff - -static inline ulong read_timer(void) -{ - return readl(CNTMR_VAL_REG(UBOOT_CNTR)) - / (CONFIG_SYS_TCLK / 1000); -} - -DECLARE_GLOBAL_DATA_PTR; - -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc - -static ulong get_timer_masked(void) -{ - ulong now = read_timer(); - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + - (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now; - } - lastdec = now; - - return timestamp; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -static inline ulong uboot_cntr_val(void) -{ - return readl(CNTMR_VAL_REG(UBOOT_CNTR)); -} - -void __udelay(unsigned long usec) -{ - uint current; - ulong delayticks; - - current = uboot_cntr_val(); - delayticks = (usec * (CONFIG_SYS_TCLK / 1000000)); - - if (current < delayticks) { - delayticks -= current; - while (uboot_cntr_val() < current) - ; - while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val()) - ; - } else { - while (uboot_cntr_val() > (current - delayticks)) - ; - } -} - -/* - * init the counter - */ -int timer_init(void) -{ - unsigned int cntmrctrl; - - /* load value into timer */ - writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); - writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); - - /* enable timer in auto reload mode */ - cntmrctrl = readl(CNTMR_CTRL_REG); - cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); - cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); - writel(cntmrctrl, CNTMR_CTRL_REG); - return 0; -} - -void timer_init_r(void) -{ - /* init the timestamp and lastdec value */ - lastdec = read_timer(); - timestamp = 0; -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return (ulong)CONFIG_SYS_HZ; -} diff --git a/arch/arm/mach-orion5x/u-boot-spl.lds b/arch/arm/mach-orion5x/u-boot-spl.lds deleted file mode 100644 index 154bb1206035..000000000000 --- a/arch/arm/mach-orion5x/u-boot-spl.lds +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on: - * - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - * Tom Cubie tangliang@allwinnertech.com - * - * Based on omap-common/u-boot-spl.lds: - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * Aneesh V aneesh@ti.com - */ -MEMORY { .nor : ORIGIN = IMAGE_TEXT_BASE,\ - LENGTH = IMAGE_MAX_SIZE } -MEMORY { .bss : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ - LENGTH = CONFIG_SPL_BSS_MAX_SIZE } - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - .text : - { - __start = .; - *(.vectors) - CPUDIR/start.o (.text) - *(.text*) - } > .nor - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.nor - - . = ALIGN(4); - .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.nor - - . = ALIGN(4); - __u_boot_list : { - KEEP(*(SORT(__u_boot_list*))); - } > .nor - - . = ALIGN(4); - __image_copy_end = .; - _end = .; - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } > .bss -} diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index f48a4f25aae6..b722089c3d58 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -30,9 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; */
#if !CONFIG_IS_ENABLED(DM_I2C) -#if defined(CONFIG_ARCH_ORION5X) -#include <asm/arch/orion5x.h> -#elif (defined(CONFIG_ARCH_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU)) +#if (defined(CONFIG_ARCH_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU)) #include <asm/arch/soc.h> #elif defined(CONFIG_ARCH_SUNXI) #include <asm/arch/i2c.h> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6bbbadc5eef3..89fd2d1db737 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -440,7 +440,7 @@ config KSZ9477
config MVGBE bool "Marvell Orion5x/Kirkwood network interface support" - depends on ARCH_KIRKWOOD || ARCH_ORION5X + depends on ARCH_KIRKWOOD select PHYLIB help This driver supports the network interface units in the diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index a77c05743262..c96732786d6c 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -29,8 +29,6 @@
#if defined(CONFIG_ARCH_KIRKWOOD) #include <asm/arch/soc.h> -#elif defined(CONFIG_ARCH_ORION5X) -#include <asm/arch/orion5x.h> #endif
#include "mvgbe.h" diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a0f48f09a7f3..3a7cfd8043c8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -175,7 +175,7 @@ config USB_EHCI_EXYNOS
config USB_EHCI_MARVELL bool "Support for Marvell on-chip EHCI USB controller" - depends on ARCH_MVEBU || ARCH_KIRKWOOD || ARCH_ORION5X + depends on ARCH_MVEBU || ARCH_KIRKWOOD default y select USB_EHCI_IS_TDI if !ARM64 ---help--- diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index b7e60c690a4f..e7cb2ee92a01 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -18,8 +18,6 @@
#if defined(CONFIG_ARCH_KIRKWOOD) #include <asm/arch/soc.h> -#elif defined(CONFIG_ARCH_ORION5X) -#include <asm/arch/orion5x.h> #endif
DECLARE_GLOBAL_DATA_PTR; diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 384a8f7d1dd8..0d39add6b602 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -10,7 +10,6 @@ * This file should be included in board config header file. * * It supports common definations for Kirkwood platform - * TBD: support for Orion5X platforms */
#ifndef _MV_COMMON_H