The i.MX6solo SABRE-SD board configuration has the following difference with i.MX6dl sabre-sd:
- DDR bus width: 32bit - DDR capacity: 512M
Signed-off-by: Ye.Li B37916@freescale.com --- Changes since v1: - Remove the "nosmp" kernel parameter, since kernel can detect cores number by SCU. - Rework the short log subject
board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg | 106 ++++++++++++++++++++ configs/mx6solosabresd_defconfig | 3 + include/configs/mx6sabre_common.h | 4 + 3 files changed, 113 insertions(+), 0 deletions(-) create mode 100644 board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg create mode 100644 configs/mx6solosabresd_defconfig
diff --git a/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg new file mode 100644 index 0000000..c886d66 --- /dev/null +++ b/board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Jason Liu r64343@freescale.com + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e0774 0x000C0000 +DATA 4 0x020e0754 0x00000000 +DATA 4 0x020e04ac 0x00000030 +DATA 4 0x020e04b0 0x00000030 +DATA 4 0x020e0464 0x00000030 +DATA 4 0x020e0490 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0494 0x00000030 +DATA 4 0x020e04a0 0x00000000 +DATA 4 0x020e04b4 0x00000030 +DATA 4 0x020e04b8 0x00000030 +DATA 4 0x020e076c 0x00000030 +DATA 4 0x020e0750 0x00020000 +DATA 4 0x020e04bc 0x00000030 +DATA 4 0x020e04c0 0x00000030 +DATA 4 0x020e04c4 0x00000030 +DATA 4 0x020e04c8 0x00000030 +DATA 4 0x020e0760 0x00020000 +DATA 4 0x020e0764 0x00000030 +DATA 4 0x020e0770 0x00000030 +DATA 4 0x020e0778 0x00000030 +DATA 4 0x020e077c 0x00000030 +DATA 4 0x020e0470 0x00000030 +DATA 4 0x020e0474 0x00000030 +DATA 4 0x020e0478 0x00000030 +DATA 4 0x020e047c 0x00000030 +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F +DATA 4 0x021b083c 0x42190219 +DATA 4 0x021b0840 0x017B0177 +DATA 4 0x021b0848 0x4B4D4E4D +DATA 4 0x021b0850 0x3F3E2D36 +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b0004 0x0002002D +DATA 4 0x021b0008 0x00333030 +DATA 4 0x021b000c 0x3F435313 +DATA 4 0x021b0010 0xB66E8B63 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b0018 0x00001740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x00431023 +DATA 4 0x021b0040 0x00000017 +DATA 4 0x021b0000 0x83190000 +DATA 4 0x021b001c 0x04008032 +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x00048031 +DATA 4 0x021b001c 0x05208030 +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00011117 +DATA 4 0x021b0004 0x0002556D +DATA 4 0x021b0404 0x00011006 +DATA 4 0x021b001c 0x00000000 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F diff --git a/configs/mx6solosabresd_defconfig b/configs/mx6solosabresd_defconfig new file mode 100644 index 0000000..d41754d --- /dev/null +++ b/configs/mx6solosabresd_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6solo_4x_mt41j128.cfg,MX6S,DEFAULT_FDT_FILE="imx6dl-sabresd.dtb",DDR_MB=512" +CONFIG_ARM=y +CONFIG_TARGET_MX6SABRESD=y diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e59a3b4..cf43404 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -11,6 +11,10 @@
#define CONFIG_MX6
+#ifdef CONFIG_MX6S +#define CONFIG_MX6DL +#endif + #include "mx6_common.h" #include <linux/sizes.h>