Tom Rini wrote:
Switch from the legacy omap3 mmc driver to the new generic omap hsmmc driver. This patch is based on the work done for Beagle, etc.
Signed-off-by: Tom Rinitrini@ti.com
Again, please Cc: the board maintainers in the future, thanks.
board/comelit/dig297/dig297.c | 9 +++++++++ include/configs/dig297.h | 5 +++-- 2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index 0062f12..a7071cd 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -37,6 +37,7 @@ #include<netdev.h> #include<twl4030.h> #include<asm/io.h> +#include<asm/arch/mmc_host_def.h> #include<asm/arch/omap3-regs.h> #include<asm/arch/mux.h> #include<asm/arch/mem.h> @@ -145,6 +146,14 @@ void set_muxconf_regs(void) MUX_DIG297(); }
+#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{
- omap_mmc_init(0);
- return 0;
+} +#endif
- #ifdef CONFIG_CMD_NET /*
- Routine: setup_net_chip
diff --git a/include/configs/dig297.h b/include/configs/dig297.h index b68f073..0e05df3 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -97,8 +97,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_MMC -#define CONFIG_OMAP3_MMC +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_OMAP_HSMMC 1
IIRC the coding style says you should define the y/n constants without a value, e.g.: #define CONFIG_GENERIC_MMC not: #define CONFIG_GENERIC_MMC 1
Apart for this: Tested-by: Luca Ceresoli luca.ceresoli@comelit.it
Luca