Hi all Please Ignore this mail Regards, Vinitha
-----Original Message----- From: Vinitha Pillai-B57223 [mailto:B57223@freescale.com] Sent: Tuesday, January 03, 2017 11:01 PM To: Udit Agarwal udit.agarwal@nxp.com; u-boot@lists.denx.de Cc: Sumit Garg sumit.garg@nxp.com; Ruchika Gupta ruchika.gupta@nxp.com; Vini Pillai vinitha.pillai@nxp.com Subject: [U-Boot,v2,3/3] LS1046ARDB: Add QSPI Secure Boot target
From: Sumit Garg sumit.garg@nxp.com
Add QSPI Secure Boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai vinitha.pillai@nxp.com Signed-off-by: Sumit Garg sumit.garg@nxp.com ---
Changes in v2: Split patches logically from 2 to 3.
board/freescale/ls1046ardb/MAINTAINERS | 4 ++++ board/freescale/ls1046ardb/ls1046ardb.c | 19 +++++++++++++++++++ configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 27 +++++++++++++++++++++++++++ include/configs/ls1046ardb.h | 2 ++ 4 files changed, 52 insertions(+) create mode 100644 configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS index ff42bef..758ff9d 100644 --- a/board/freescale/ls1046ardb/MAINTAINERS +++ b/board/freescale/ls1046ardb/MAINTAINERS @@ -7,3 +7,7 @@ F: include/configs/ls1046ardb.h F: configs/ls1046ardb_qspi_defconfig F: configs/ls1046ardb_sdcard_defconfig F: configs/ls1046ardb_emmc_defconfig + +M: Sumit Garg sumit.garg@nxp.com +S: Maintained +F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 585c807..6fadea1 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -20,6 +20,7 @@ #include <fsl_csu.h> #include <fsl_esdhc.h> #include "cpld.h" +#include <fsl_sec.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -77,6 +78,24 @@ int board_init(void) enable_layerscape_ns_access(); #endif
+#ifdef CONFIG_SECURE_BOOT + /* + * In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig new file mode 100644 index 0000000..c79c875 --- /dev/null +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -0,0 +1,27 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046ARDB=y +CONFIG_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_QSPI=y +CONFIG_RSA=y diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 2fe8fc1..afa580e 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -234,4 +234,6 @@ "7e800000.flash:16m(nand_uboot)," \ "48m(nand_kernel),448m(nand_free)"
+#include <asm/fsl_secure_boot.h> + #endif /* __LS1046ARDB_H__ */