[U-Boot-Users] Help, how do I decouple the reset address from the hw config word on ppc82xx

Hi,

I've been attempting to build u-boot to run on an embedded planet ep8260 board reasonably sucessfully, however my board profile has flash starting at 0xFF000000, the reset vector is of course at 0xFFF00100. I've been scanning the code and build files looking for a reference to decouple the hardware configuration word at 0xFF00000 and the reset vector at 0xFFF00100 so far with no real sucess.

Is there a mechanism within the build to do this?

Thx, I hope this makes sense.

Mark Doherty

---

arca technologies 2 Trench Road Mallusk, Belfast Northern Ireland BT36 4TY

---