Hi Simon,
On Tue, 8 Jan 2013 12:50:57 -0800, Simon Glass sjg@chromium.org wrote:
Hi Albert,
On Tue, Jan 8, 2013 at 7:07 AM, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hello Tom,
The following changes since commit 96764df1b47ddebfb50fadf5af72530b07b5fc89:
Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08 14:59:37 +0100)
Albert ARIBAUD (2): Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Andreas Bießmann (1): omap3/mem.c: remove unused defines
Ashok (1): mx35pdk:Use IMX_GPIO_NR macro
Davide Bonfanti (1): davinci: fixed cpu reset
Fabio Estevam (6): mx35pdk: Allow booting of a device tree kernel mx53loco: Call PMIC related functions from board_late_init() mx51evk: Remove unneeded comment mx53loco: Remove unneeded 'retval' variable mx53loco: Improve error handling on power_init() tools: imximage: Load a size that is multiple of 512
Ilya Yanok (6): OMAP: include sys_proto.h from boot-common am335x_evm: add nand pinmux definition am33xx: NAND support am335x_evm: enable NAND support am33xx_spl_bch: simple SPL nand loader for AM33XX am335x_evm: enable SPL NAND support
Lokesh Vutla (1): omap: emif: configure emif only when required
Mansoor Ahamed (2): am33xx: add ELM support omap_gpmc: BCH8 support (ELM based)
Marek Vasut (1): mxs: Add NAND fdt and ramdisk partition to m28evk
Nikita Kiryanov (2): gpio: add gpio_is_valid() to omap_gpio API cm-t35: enable zero bootdelay check
Otavio Salvador (4): mx53loco: We shouldn't hardcode a rootfs filesystem type mx53loco: Change default loadaddr to 0x72000000 mx6qsabrelite: Change default loadaddr to 0x12000000 mx6qsabre_common: Change default loadaddr to 0x12000000
Peter Barada (1): Pass sdrc timing values through board_sdrc_timings structure
Robert P. J. Day (4): omap3_beagle.h: Fix comment for true/false return value. omap3: Add a few comments to "#endif"s for readability. omap4: Add comments on some "#endif"s for readability. OMAP: Tweak omap-common/Makefile since reset.S -> reset.c
Shawn Guo (3): fsl_esdhc: add MMC_MODE_HC host_caps mx6qsabresd: add usdhc2 and usdhc4 support mx6qsabresd: use on-board eMMC to store environment
Stefano Babic (2): OMAP3: fix panel timing on the mt_ventoux board OMAP3: TAM3517: add macros for reading eeprom
Thomas Weber (1): OMAP3: Remove unused PHYS_SDRAM_1_SIZE
Vincent Stehlé (2): omap24xx_i2c: Handle wait_for_bb error power: twl6035: complain on LDO9 error
Yegor Yefremov (2): am335x: disable internal delay for RGMII mode am335x: cpsw: make phy address configurable
ajoy (1): OMAP3 SPI : Fixed bugs related to SPI transfer
arch/arm/cpu/arm926ejs/davinci/reset.c | 2 +- arch/arm/cpu/armv7/am33xx/Makefile | 2 + arch/arm/cpu/armv7/am33xx/board.c | 1 + arch/arm/cpu/armv7/am33xx/clock.c | 10 + arch/arm/cpu/armv7/am33xx/elm.c | 212 ++++++++++++++ arch/arm/cpu/armv7/am33xx/mem.c | 101 +++++++ arch/arm/cpu/armv7/omap-common/Makefile | 5 +- arch/arm/cpu/armv7/omap-common/boot-common.c | 1 + arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++- arch/arm/cpu/armv7/omap3/board.c | 4 +- arch/arm/cpu/armv7/omap3/mem.c | 18 +- arch/arm/cpu/armv7/omap3/sdrc.c | 36 +-- arch/arm/cpu/armv7/omap4/clocks.c | 2 +- arch/arm/cpu/armv7/omap4/hwinit.c | 4 +- arch/arm/include/asm/arch-am33xx/cpu.h | 53 ++++ arch/arm/include/asm/arch-am33xx/elm.h | 93 ++++++ arch/arm/include/asm/arch-am33xx/hardware.h | 3 + arch/arm/include/asm/arch-am33xx/mem.h | 83 ++++++ arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 120 ++++++++ arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 + arch/arm/include/asm/arch-omap3/sys_proto.h | 13 +- arch/arm/include/asm/omap_gpio.h | 7 + board/corscience/tricorder/tricorder.c | 13 +- board/freescale/mx35pdk/mx35pdk.c | 2 +- board/freescale/mx53loco/mx53loco.c | 84 ++++-- board/freescale/mx6qsabresd/mx6qsabresd.c | 80 ++++- board/isee/igep0020/igep0020.c | 29 +- board/isee/igep0030/igep0030.c | 29 +- board/overo/overo.c | 37 ++- board/technexion/twister/twister.c | 10 +- board/teejet/mt_ventoux/mt_ventoux.c | 23 +- board/ti/am335x/board.c | 4 +- board/ti/am335x/mux.c | 22 ++ board/ti/beagle/beagle.c | 53 ++-- board/ti/evm/evm.c | 19 +- board/timll/devkit8000/devkit8000.c | 13 +- drivers/gpio/omap_gpio.c | 10 +- drivers/i2c/omap24xx_i2c.c | 20 +- drivers/mmc/fsl_esdhc.c | 2 +- drivers/mtd/nand/Makefile | 5 +- drivers/mtd/nand/am335x_spl_bch.c | 238 +++++++++++++++ drivers/mtd/nand/omap_gpmc.c | 403 +++++++++++++++++++++++++- drivers/net/cpsw.c | 5 +- drivers/power/twl6035.c | 17 +- drivers/spi/omap3_spi.c | 76 +++-- drivers/spi/omap3_spi.h | 1 + include/configs/am335x_evm.h | 50 ++++ include/configs/cm_t35.h | 2 +- include/configs/dig297.h | 1 - include/configs/igep00x0.h | 1 - include/configs/m28evk.h | 2 + include/configs/mcx.h | 1 - include/configs/mx35pdk.h | 1 + include/configs/mx51evk.h | 4 - include/configs/mx53loco.h | 10 +- include/configs/mx6qsabre_common.h | 4 +- include/configs/mx6qsabreauto.h | 5 + include/configs/mx6qsabrelite.h | 2 +- include/configs/mx6qsabresd.h | 6 + include/configs/omap3_beagle.h | 2 +- include/configs/omap3_mvblx.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap3_zoom2.h | 1 - include/configs/tam3517-common.h | 59 +++- include/configs/tricorder.h | 1 - include/image.h | 3 + include/twl6035.h | 2 +- tools/imximage.c | 9 +- 70 files changed, 1889 insertions(+), 290 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/elm.c create mode 100644 arch/arm/cpu/armv7/am33xx/mem.c create mode 100644 arch/arm/include/asm/arch-am33xx/elm.h create mode 100644 arch/arm/include/asm/arch-am33xx/mem.h create mode 100644 arch/arm/include/asm/arch-am33xx/omap_gpmc.h create mode 100644 drivers/mtd/nand/am335x_spl_bch.c
I have some ARM patches starting here:
http://patchwork.ozlabs.org/patch/203071/
Do you expect to pick up some of these at some point?
They've been submitted in v1 before nov 3rd, and the last version has received no request for correction for a whole month, so they have to get in anyway. I'll pull them in and send a PR tomorrow morning GMT+1.
Regards, Simon
Amicalement,