Re: [U-Boot] Understanding a BDI U-boot issue

On Fri, 11 Mar 2011 15:06:09 -0800 Charles Krinke charles.krinke@gmail.com wrote:

I have inherited a MPC8323ERDB project and when I connect my BDI to it, I get to this point when the target is turned on.

CPU: e300c2, MPC8323E, Rev: 1.1 at 333.333 MHz, CSB: 133.333 MHz Econolite Control Products ASC/4I2C: ready DRAM: 64 MB FLASH: 16 MB

With the BDI, when I issue its "go" command, I dont see anything else come out on the serial port.

I wonder if anyone might help me understand what sort of things might cause this despicable situation.

Try "re ru". If this makes it work, the BDI is probably doing initialization that puts the board in a state that U-Boot isn't expecting.

-Scott