[U-Boot-Users] Patch for NAND Booting on SMDK2410

Hi folks,

here is a patch to enable U-Boot 1.0 to boot from NAND/SmartMedia cards. smdk2410.h must include the line '#define CONFIG_BOOT_NAND 1" and the resulting u-boot.bin must be copied to the first SmartMedia sectors (with a JTAG tool for example). The first sector of the SmartMedia card should also be marked as "Defect". With J33 and J34 closed the board should then boot from SmartMedia.

This first version is very simple as U-Boot is linear on the SmartMedia and don't allows a filesystem. Later version may include placing U-Boot on a filesystem.

This patch also includes code for clearing the BSS segment. This is not the same code Larsen submitted this morning :-(

Bye,