At present gd->ram_size is 0 in SPL, meaning that it is not possible to enable the cache. Correct this by always populating the RAM size correctly.
This increases code size by about 500 bytes in SPL, since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Quentin Schulz quentin.schulz@cherry.de ---
(no changes since v3)
Changes in v3: - Cut the patch down to bare bones
Changes in v2: - Add new patch to correct memory size in SPL
drivers/ram/rockchip/sdram_rk3399.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index ef9a1824b2b..bc79c034808 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -3142,19 +3142,19 @@ static int rk3399_dmc_init(struct udevice *dev)
static int rk3399_dmc_probe(struct udevice *dev) { + struct dram_info *priv = dev_get_priv(dev); + #if defined(CONFIG_TPL_BUILD) || \ (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) if (rk3399_dmc_init(dev)) return 0; -#else - struct dram_info *priv = dev_get_priv(dev); - +#endif priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); debug("%s: pmugrf = %p\n", __func__, priv->pmugrf); priv->info.base = CFG_SYS_SDRAM_BASE; priv->info.size = rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2); -#endif + return 0; }