On Fri, Jan 12, 2018 at 4:00 AM, Mehmet Ali İPİN mehmet.ipin@pavotek.com.tr wrote:
From: Mehmet Ali İPİN Sent: Friday, January 12, 2018 8:39 AM To: 'u-boot@lists.dex.de' u-boot@lists.dex.de Subject: u-boot v2016 vs v2013
Dear Sir/Madam,
Hello,
We have an i.mx6dl board which was referenced to sabreauto kit, except we use KSZ9021 as phy chip instead of AR8031. We installed the krogoth and jethro versions of yocto; as result u-booth 2016 and 2013 versions were installed accordingly. When downloaded the code 2013 u-boot version controlled the phy chip, even we did not touch the ethernet-phy related files.
But for u-boot 2016, even we modified the config and source files according to KSZ9021, even MDO and MDCLK pins are not activated.
I would be very grateful, if anybody knows a solution about this problem and/or give me a direction.
Please try 2018.01 instead.
Another suggestion is to do a similar changes in your board file like this: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=dac09fc10b71045ac261a9b8a05d...
Regards,
Fabio Estevam