The rk3288 by default uses memory areas for u-boot and runtime parts like pxe+scriptfile that we may want to use for secure firmware and thus mark secure later on. So move the relevant parts a bit away from that.
Signed-off-by: Heiko Stuebner heiko@sntech.de --- include/configs/rk3288_common.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 72a54bc0ab..a36aa96b87 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -20,7 +20,7 @@ #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x0 once return from SPL */ #endif -#define CONFIG_SYS_INIT_SP_ADDR 0x00100000 +#define CONFIG_SYS_INIT_SP_ADDR 0x00300000 #define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_STACK 0xff718000 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) @@ -48,9 +48,9 @@
/* usb host support */ #define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ - "pxefile_addr_r=0x00100000\0" \ - "fdt_addr_r=0x01f00000\0" \ + "scriptaddr=0x00500000\0" \ + "pxefile_addr_r=0x00600000\0" \ + "fdt_addr_r=0x5600000\0" \ "kernel_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x04000000\0"