Import wandboard devicetree files so that the mx6q and mx6qp variants can be properly supported.
Signed-off-by: Fabio Estevam festevam@gmail.com --- arch/arm/dts/imx6q-wandboard-revb1.dts | 23 +++ arch/arm/dts/imx6qdl-wandboard-revd1.dtsi | 195 ++++++++++++++++++++++ arch/arm/dts/imx6qp-wandboard-revd1.dts | 23 +++ 3 files changed, 241 insertions(+) create mode 100644 arch/arm/dts/imx6q-wandboard-revb1.dts create mode 100644 arch/arm/dts/imx6qdl-wandboard-revd1.dtsi create mode 100644 arch/arm/dts/imx6qp-wandboard-revd1.dts
diff --git a/arch/arm/dts/imx6q-wandboard-revb1.dts b/arch/arm/dts/imx6q-wandboard-revb1.dts new file mode 100644 index 0000000000..f6ccbecff9 --- /dev/null +++ b/arch/arm/dts/imx6q-wandboard-revb1.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam fabio.estevam@freescale.com + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard-revb1.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board rev B1"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi new file mode 100644 index 0000000000..9390979688 --- /dev/null +++ b/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam fabio.estevam@freescale.com + +#include "imx6qdl-wandboard.dtsi" + +/ { + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + regulator-name = "ETH_PHY"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 13 GPIO_ACTIVE_LOW>; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&fec { + phy-supply = <®_eth_phy>; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6qp-wandboard-revd1.dts b/arch/arm/dts/imx6qp-wandboard-revd1.dts new file mode 100644 index 0000000000..08d8b78a20 --- /dev/null +++ b/arch/arm/dts/imx6qp-wandboard-revd1.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam fabio.estevam@freescale.com + */ +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 QuadPlus Board revD1"; + compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +};