Several changes have been made to the device tree in the kernel, so update that as well as the corresponding imx8mp-u-boot.dtsi files to prevent breaking the booting.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index 18d1728e1d..dfb747bb02 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -44,6 +44,9 @@
&aips3 { bootph-pre-ram; + spba-bus@30800000 { + bootph-pre-ram; + }; };
&iomuxc { diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi index bb916a0948..428c60462e 100644 --- a/arch/arm/dts/imx8mp.dtsi +++ b/arch/arm/dts/imx8mp.dtsi @@ -123,6 +123,7 @@
A53_L2: l2-cache0 { compatible = "cache"; + cache-unified; cache-level = <2>; cache-size = <0x80000>; cache-line-size = <64>; @@ -379,6 +380,8 @@ compatible = "fsl,imx8mp-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <1>; };
@@ -406,12 +409,36 @@ status = "disabled"; };
+ gpt1: timer@302d0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@302e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@302f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>; + clock-names = "ipg", "per"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; };
- gpr: iomuxc-gpr@30340000 { + gpr: syscon@30340000 { compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -424,27 +451,44 @@ #address-cells = <1>; #size-cells = <1>;
- imx8mp_uid: unique-id@420 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x8 0x8> describes fuses 0x420 and + * 0x430). + */ + imx8mp_uid: unique-id@8 { /* 0x420-0x430 */ reg = <0x8 0x8>; };
- cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; };
- eth_mac1: mac-address@90 { + eth_mac1: mac-address@90 { /* 0x640 */ reg = <0x90 6>; };
- eth_mac2: mac-address@96 { + eth_mac2: mac-address@96 { /* 0x658 */ reg = <0x96 6>; }; + + tmu_calib: calib@264 { /* 0xd90-0xdc0 */ + reg = <0x264 0x10>; + }; };
- anatop: anatop@30360000 { - compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop", - "syscon"; + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop"; reg = <0x30360000 0x10000>; + #clock-cells = <1>; };
snvs: snvs@30370000 { @@ -523,6 +567,7 @@ compatible = "fsl,imx8mp-gpc"; reg = <0x303a0000 0x1000>; interrupt-parent = <&gic>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <3>;
@@ -589,7 +634,7 @@ reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>; };
- pgc_hsiomix: power-domains@17 { + pgc_hsiomix: power-domain@17 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, @@ -631,6 +676,14 @@ reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>; clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; }; + + pgc_mlmix: power-domain@24 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MLMIX>; + clocks = <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>, + <&clk IMX8MP_CLK_NPU_ROOT>; + }; }; }; }; @@ -693,6 +746,30 @@ clocks = <&osc_24m>; clock-names = "per"; }; + + gpt6: timer@306e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306e0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@306f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306f0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>; + clock-names = "ipg", "per"; + }; + + gpt4: timer@30700000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>; + clock-names = "ipg", "per"; + }; };
aips3: bus@30800000 { @@ -702,112 +779,129 @@ #size-cells = <1>; ranges;
- ecspi1: spi@30820000 { + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; + reg = <0x30800000 0x100000>; #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, - <&clk IMX8MP_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + ranges;
- ecspi2: spi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, - <&clk IMX8MP_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, + <&clk IMX8MP_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- ecspi3: spi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, - <&clk IMX8MP_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, + <&clk IMX8MP_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- uart1: serial@30860000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART1_ROOT>, - <&clk IMX8MP_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, + <&clk IMX8MP_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- uart3: serial@30880000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART3_ROOT>, - <&clk IMX8MP_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART1_ROOT>, + <&clk IMX8MP_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- uart2: serial@30890000 { - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_UART2_ROOT>, - <&clk IMX8MP_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART3_ROOT>, + <&clk IMX8MP_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- flexcan1: can@308c0000 { - compatible = "fsl,imx8mp-flexcan"; - reg = <0x308c0000 0x10000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_IPG_ROOT>, - <&clk IMX8MP_CLK_CAN1_ROOT>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX8MP_CLK_CAN1>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - fsl,stop-mode = <&gpr 0x10 4>; - status = "disabled"; - }; + uart2: serial@30890000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART2_ROOT>, + <&clk IMX8MP_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + };
- flexcan2: can@308d0000 { - compatible = "fsl,imx8mp-flexcan"; - reg = <0x308d0000 0x10000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_IPG_ROOT>, - <&clk IMX8MP_CLK_CAN2_ROOT>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX8MP_CLK_CAN2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - fsl,stop-mode = <&gpr 0x10 5>; - status = "disabled"; + flexcan1: can@308c0000 { + compatible = "fsl,imx8mp-flexcan"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN1_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + flexcan2: can@308d0000 { + compatible = "fsl,imx8mp-flexcan"; + reg = <0x308d0000 0x10000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN2_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 5>; + status = "disabled"; + }; };
crypto: crypto@30900000 { @@ -1063,11 +1157,11 @@ noc_opp_table: opp-table { compatible = "operating-points-v2";
- opp-200M { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; };
- opp-1000M { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; }; }; @@ -1080,10 +1174,78 @@ #size-cells = <1>; ranges;
+ mipi_dsi: dsi@32e60000 { + compatible = "fsl,imx8mp-mipi-dsim"; + reg = <0x32e60000 0x400>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <200000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_dsim>; + }; + }; + }; + }; + + lcdif1: display-controller@32e80000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e80000 0x10000>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>; + status = "disabled"; + + port { + lcdif1_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif1>; + }; + }; + }; + + lcdif2: display-controller@32e90000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e90000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>; + status = "disabled"; + + port { + lcdif2_to_ldb: endpoint { + remote-endpoint = <&ldb_from_lcdif2>; + }; + }; + }; + media_blk_ctrl: blk-ctrl@32ec0000 { compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; reg = <0x32ec0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; power-domains = <&pgc_mediamix>, <&pgc_mipi_phy1>, <&pgc_mipi_phy1>, @@ -1122,12 +1284,55 @@ "disp1", "disp2", "isp", "phy";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, - <&clk IMX8MP_CLK_MEDIA_APB>; + <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, + <&clk IMX8MP_VIDEO_PLL1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, - <&clk IMX8MP_SYS_PLL1_800M>; - assigned-clock-rates = <500000000>, <200000000>; - + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_VIDEO_PLL1_OUT>, + <&clk IMX8MP_VIDEO_PLL1_OUT>; + assigned-clock-rates = <500000000>, <200000000>, + <0>, <0>, <1039500000>; #power-domain-cells = <1>; + + lvds_bridge: bridge@5c { + compatible = "fsl,imx8mp-ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; };
pcie_phy: pcie-phy@32f00000 { @@ -1158,6 +1363,7 @@ <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>; interconnect-names = "noc-pcie", "usb1", "usb2", "pcie"; #power-domain-cells = <1>; + #clock-cells = <0>; }; };
@@ -1165,6 +1371,13 @@ compatible = "fsl,imx8mp-pcie"; reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; reg-names = "dbi", "config"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -1192,6 +1405,32 @@ status = "disabled"; };
+ pcie_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mp-pcie-ep"; + reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>; + reg-names = "dbi", "addr_space"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */ + interrupt-names = "dma"; + fsl,max-link-speed = <3>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; @@ -1223,6 +1462,28 @@ power-domains = <&pgc_gpu2d>; };
+ vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mm-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; + }; + vpumix_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>; @@ -1234,6 +1495,9 @@ <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>, <600000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; @@ -1279,7 +1543,7 @@ reg = <0x32f10100 0x8>, <0x381f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1292,9 +1556,9 @@ usb_dwc3_0: usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; @@ -1321,7 +1585,7 @@ reg = <0x32f10108 0x8>, <0x382f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; @@ -1334,9 +1598,9 @@ usb_dwc3_1: usb@38200000 { compatible = "snps,dwc3"; reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, - <&clk IMX8MP_CLK_USB_ROOT>; + <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>;