Re: [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT

Hi Michal,

On 6 April 2016 at 12:28, Michal Simek michal.simek@xilinx.com wrote:

Create CMD_FDT Kconfig entry to have an option to disable fdt command which is not required for small configuration which requires libfdt only. Enable it by default for all targets which enables OF_LIBFDT.

Signed-off-by: Michal Simek michal.simek@xilinx.com

Changes in v2: None

cmd/Kconfig | 7 +++++++ cmd/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/cmd/Kconfig b/cmd/Kconfig index fe8b4f0510da..8703cdb4a9be 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -173,6 +173,13 @@ config CMD_ELF help Boot an ELF/vxWorks image from the memory.

+config CMD_FDT

•   bool "Flattened Device Tree utility commands"
  

•   default y
  

•   depends on OF_LIBFDT
  

•   help
  

•     Do FDT related setup before booting into the Operating System.
  

config CMD_GO bool "go" default y diff --git a/cmd/Makefile b/cmd/Makefile index ba041973079c..f95759e67044 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -54,7 +54,7 @@ obj-$(CONFIG_CMD_EXT4) += ext4.o obj-$(CONFIG_CMD_EXT2) += ext2.o obj-$(CONFIG_CMD_FAT) += fat.o obj-$(CONFIG_CMD_FDC) += fdc.o -obj-$(CONFIG_OF_LIBFDT) += fdt.o +obj-$(CONFIG_CMD_FDT) += fdt.o

Won't this disable the command for lots of boards?

obj-$(CONFIG_CMD_FITUPD) += fitupd.o obj-$(CONFIG_CMD_FLASH) += flash.o ifdef CONFIG_FPGA -- 1.9.1

Regards, Simon