-----Original Message----- From: Holger Brunck [mailto:holger.brunck@keymile.com] Sent: 25 September 2013 12:50 To: Prafulla Wadaskar; albert.u.boot@aribaud.net Cc: u-boot@lists.denx.de; Valentin Longchamp Subject: Re: [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board
Hi Prafulla, hi Albert, we are not so far away from v2013.10 I guess, so could one of you please pick of these small patch series? Thanks!
Note for this patch there is already a v2 posted which applies cleanly again.
So there were: http://patchwork.ozlabs.org/patch/275613/ http://patchwork.ozlabs.org/patch/256901/ http://patchwork.ozlabs.org/patch/256900/
Dear Holger
I have pulled these patches to u-boot-marvell.git. Will send the pull request soon.
Regards... Prafulla . . .
Regards Holger
On 07/04/2013 03:29 PM, Holger Brunck wrote:
From: Karlheinz Jerg karlheinz.jerg@keymile.com
The board is similar to the standard km_kirkwood
board. From a
u-boot point of view, the only difference is an
increased
256 MiB DRAM (128M16). A board based on this design
is for
example the SUP12.
Signed-off-by: Karlheinz Jerg
Signed-off-by: Holger Brunck
boards.cfg | 1 + include/configs/km_kirkwood.h | 10 ++++++++++ 2 files changed, 11 insertions(+)
diff --git a/boards.cfg b/boards.cfg index c0c4282..2bb493f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -165,6 +165,7 @@ lschlv2 arm
arm926ejs lsxl buffalo
lsxhl arm arm926ejs
lsxl buffalo kirkwood lsxl:LSXHL
km_kirkwood arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD
km_kirkwood_pci arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI
+km_kirkwood_128m16 arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_128M16
kmnusa arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_NUSA
kmsuv31 arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_SUV31
mgcoge3un arm arm926ejs
km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN
diff --git a/include/configs/km_kirkwood.h
b/include/configs/km_kirkwood.h
index 83bb7aa..2b5f389 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -51,6 +51,16 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2
(Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
+/* KM_KIRKWOOD_128M16 */ +#elif defined(CONFIG_KM_KIRKWOOD_128M16) +#define CONFIG_IDENT_STRING "\nKeymile
Kirkwood 128M16"
+#define CONFIG_HOSTNAME km_kirkwood_128m16 +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \
$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_DISABLE_PCIE +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2
(Mux-Port 1)*/
/* KM_NUSA */ #elif defined(CONFIG_KM_NUSA) #define KM_IVM_BUS "pca9547:70:9" /* I2C2
(Mux-Port 1)*/