Hi Wolfgang,
On Sunday 06 July 2008, Wolfgang Denk wrote:
Open question:
<snip>
2994 05/30 sascha.laue@liebh [U-Boot-Users] [PATCH] Change GPIO to control the LSB transmitter on lwmon5 board. -> for ppc_4xx custodian
Forgot about that, sorry. I checked and it doesn't apply. Seems to be depend on other non-applied patches. I asked Sascha to resubmit.
<snip>
3766 06/12 "Brian S. Park" Re: [U-Boot-Users] U-Boot and Linux on Walnut based board -> problem confirmed, to be taken care of by PPC4xx custodian.
I just tested with current TOT U-Boot (c956717a) and it works (again). Not sure what caused this problem though.
3828 06/14 Larry Johnson [U-Boot-Users] [PATCH] ppc4xx: Update and add FDT to Korat board support 3829 06/14 Larry Johnson [U-Boot-Users] [PATCH] pp44xx: Remove implementation of testdram() from Korat board support -> for ppc4xx custodian
This was submitted *after* the merge window closed. So I staged it into my internal next branch. Or should I apply those patches to master and ask you to pull them now?
3871 06/16 Stefan Roese [U-Boot-Users] [PATCH] cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably -> for CFI-Flash custodian
Already applied:
fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
3905 06/17 "Nobuhiro Iwamats Re: [U-Boot-Users] [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class 3908 06/17 Nobuhiro Iwamatsu [PATCH][RFC] pci: Add check PCI bridge class (Re: [U-Boot-Users] [PATCH][RFC] pci: Remove CONFI -> asked other users (Stefan Roese) for feedback
Will review and test today/tomorrow.
4026 06/18 Jason McMullan [U-Boot-Users] [PATCH] mtd: SPI Flash: Winbond W25X16/WX2532/WX2564 support 4027 06/19 Jason McMullan [U-Boot-Users] [PATCH] mtd: SPI Flash: Support the ST Microelectronics M25P80 and M25P40 4028 06/19 "McMullan, Jason" [U-Boot-Users] MTD Winbond and MTD STMicro SPI Flash Support -> for MTD custodian
MTD custodian? We don't have one. Should I put those patches in my cfi-flash custodian repository?
Again, those patches were submitted *after* the merge windows closed. So I would normally queue them for the next merge window. Please let me know if you want to merge them now.
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================