On Wed, Sep 02, 2020 at 07:31:46PM +0200, Sebastian Reichel wrote:
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor series (GE Bx50). It consists of a carrier PCB used in combination with a Congatec QMX6 SoM. This adds U-Boot support using device model everywhere and SPL for memory initialization.
Proper configuration is provided as 'ge_b1x5v2_defconfig' and the combined image u-boot-with-spi.imx can be flashed directly to 1024 byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can be loaded separately via USB-OTG using e.g. imx_usb.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com
As I went checking for a good sized gap between kernel and dtb, and I see it's got I was looking for:
Reviewed-by: Tom Rini trini@konsulko.com