R-mobile SoC (at least SH73A0) has extension bits to store 8th bit of iccl and icch. This patch add support for the extentin bits.
Acked-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com Signed-off-by: Tetsuyuki Kobayashi koba@kmckk.co.jp --- Changes for v2: - define CONFIG_SH_I2C_8BIT at board config file and replace HAS_ICIC67. Changes for v3: - none
drivers/i2c/sh_i2c.c | 30 ++++++++++++++++++++++-------- include/configs/kzm9g.h | 1 + 2 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index fd8cb92..b98fce5 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -48,7 +48,13 @@ static struct sh_i2c *base; #define SH_IC_WAIT (1 << 1) #define SH_IC_DTE (1 << 0)
-static u8 iccl, icch; +#ifdef CONFIG_SH_I2C_8BIT +/* store 8th bit of iccl and icch in ICIC register */ +#define SH_I2C_ICIC_ICCLB8 (1 << 7) +#define SH_I2C_ICIC_ICCHB8 (1 << 6) +#endif + +static u16 iccl, icch;
#define IRQ_WAIT 1000
@@ -92,12 +98,20 @@ static void irq_busy(struct sh_i2c *base)
static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) { + u8 icic = 0; + writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr);
- writeb(iccl, &base->iccl); - writeb(icch, &base->icch); - writeb(0, &base->icic); + writeb(iccl & 0xff, &base->iccl); + writeb(icch & 0xff, &base->icch); +#ifdef CONFIG_SH_I2C_8BIT + if (iccl > 0xff) + icic |= SH_I2C_ICIC_ICCLB8; + if (icch > 0xff) + icic |= SH_I2C_ICIC_ICCHB8; +#endif + writeb(icic, &base->icic);
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); @@ -222,18 +236,18 @@ void i2c_init(int speed, int slaveaddr) denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW); tmp = num * 10 / denom; if (tmp % 10 >= 5) - iccl = (u8)((num/denom) + 1); + iccl = (u16)((num/denom) + 1); else - iccl = (u8)(num/denom); + iccl = (u16)(num/denom);
/* Calculate the value for icch. From the data sheet: icch = (p clock / transfer rate) * (H / (L + H)) */ num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH; tmp = num * 10 / denom; if (tmp % 10 >= 5) - icch = (u8)((num/denom) + 1); + icch = (u16)((num/denom) + 1); else - icch = (u8)(num/denom); + icch = (u16)(num/denom); }
/* diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index a1ae718..8877516 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -155,6 +155,7 @@ /* I2C */ #define CONFIG_CMD_I2C #define CONFIG_SH_I2C 1 +#define CONFIG_SH_I2C_8BIT #define CONFIG_HARD_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_MAX_I2C_BUS (2)