To enable CAN init, CONFIG_CAN has to be defined in the board config file and at91_can_hw_init() has to be called in the board specific code.
CAN is available on AT91SAM9263 and AT91CAP9 SoC.
Signed-off-by: Daniel Gorsulowski Daniel.Gorsulowski@esd.eu --- cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ include/asm-arm/arch-at91/at91_common.h | 1 + 3 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/cpu/arm926ejs/at91/at91cap9_devices.c b/cpu/arm926ejs/at91/at91cap9_devices.c index c0024ac..39e405f 100644 --- a/cpu/arm926ejs/at91/at91cap9_devices.c +++ b/cpu/arm926ejs/at91/at91cap9_devices.c @@ -3,6 +3,10 @@ * Stelian Pop stelian.pop@leadtechdesign.com * Lead Tech Design <www.leadtechdesign.com> * + * (C) Copyright 2009 + * Daniel Gorsulowski daniel.gorsulowski@esd.eu + * esd electronic system design gmbh <www.esd.eu> + * * See file CREDITS for list of people who contributed to this * project. * @@ -174,3 +178,14 @@ void at91_macb_hw_init(void) #endif } #endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA12, 0); /* CAN_TX */ + at91_set_A_periph(AT91_PIN_PA13, 1); /* CAN_RX */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_CAN); +} +#endif diff --git a/cpu/arm926ejs/at91/at91sam9263_devices.c b/cpu/arm926ejs/at91/at91sam9263_devices.c index 0f2613e..f72efdf 100644 --- a/cpu/arm926ejs/at91/at91sam9263_devices.c +++ b/cpu/arm926ejs/at91/at91sam9263_devices.c @@ -3,6 +3,10 @@ * Stelian Pop stelian.pop@leadtechdesign.com * Lead Tech Design <www.leadtechdesign.com> * + * (C) Copyright 2009 + * Daniel Gorsulowski daniel.gorsulowski@esd.eu + * esd electronic system design gmbh <www.esd.eu> + * * See file CREDITS for list of people who contributed to this * project. * @@ -182,3 +186,14 @@ void at91_uhp_hw_init(void) at91_set_gpio_output(AT91_PIN_PA24, 0); } #endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA13, 0); /* CAN_TX */ + at91_set_A_periph(AT91_PIN_PA14, 1); /* CAN_RX */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_CAN); +} +#endif diff --git a/include/asm-arm/arch-at91/at91_common.h b/include/asm-arm/arch-at91/at91_common.h index 9c4e019..01840ee 100644 --- a/include/asm-arm/arch-at91/at91_common.h +++ b/include/asm-arm/arch-at91/at91_common.h @@ -25,6 +25,7 @@ #ifndef AT91_COMMON_H #define AT91_COMMON_H
+void at91_can_hw_init(void); void at91_macb_hw_init(void); void at91_serial_hw_init(void); void at91_serial0_hw_init(void);