From: Bagavathiannan Palanisamy Bagavathiannan.Palanisamy@keymile.com
Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6 It is required remove local mgmt IP address, when DIP Switch PIN3 is enabled. DIP Switch 4 also enabled to avoid u-boot update in future for DIP switch enhancements.
Signed-off-by: Bagavathiannan Palanisamy Bagavathiannan.Palanisamy@keymile.com Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com ---
Changes in v2: None
board/keymile/km82xx/km82xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index 01a3c20..9e285ec 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -329,8 +329,8 @@ int last_stage_init(void)
dip_switch = in_8(&base->mswitch); dip_switch &= BFTICU_DIPSWITCH_MASK; - /* dip switch 'full reset' or 'db erase' */ - if (dip_switch & 0x1 || dip_switch & 0x2) { + /* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */ + if (dip_switch != 0) { /* start bootloader */ puts("DIP: Enabled\n"); setenv("actual_bank", "0");