Add support for the Touch Revolution Fusion7 display: 800x480 RGB with a custom F0710A resistive touch controller.
Auto-detection of this panel is supported so no configuration is required.
Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 261fa7e..b1d85da 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -621,6 +621,26 @@ struct display_info_t const displays[] = {{ .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, + .addr = 0x10, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "fusion7", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33898, + .left_margin = 96, + .right_margin = 24, + .upper_margin = 3, + .lower_margin = 10, + .hsync_len = 72, + .vsync_len = 7, + .sync = 0x40000002, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, .addr = 0x48, .pixfmt = IPU_PIX_FMT_RGB666, .detect = detect_i2c,