Re: [PATCH 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF

Hi Jagan

On 2/28/21 4:52 PM, Jagan Teki wrote:

7" OF is a capacitive touch 7" Open Frame panel solutions with

• 7" AUO B101AW03 LVDS panel
• EDT, FT5526 Touch

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board.

Add support for it.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com

arch/arm/dts/Makefile | 1 + ...rogea-stm32mp1-microdev2.0-of7-u-boot.dtsi | 51 ++++++ ...157a-microgea-stm32mp1-microdev2.0-of7.dts | 154 ++++++++++++++++++ arch/arm/mach-stm32mp/Kconfig | 7 + board/engicam/stm32mp1/MAINTAINERS | 6 + ...-microgea-stm32mp1-microdev2-of7_defconfig | 80 +++++++++ 6 files changed, 299 insertions(+) create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7b275fe46c..7a9a05310d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -980,6 +980,7 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157a-dk1.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \

• stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ stm32mp157a-icore-stm32mp1-ctouch2.dtb \ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157c-dk2.dtb \

diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi new file mode 100644 index 0000000000..e4bd215812 --- /dev/null +++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/*

• • Copyright (C) STMicroelectronics 2019 - All Rights Reserved
• • Copyright (c) 2020 Amarula Solutions(India)
• • Author: Jagan Teki jagan@amarulasolutions.com
• */

+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"

+/{

• aliases {

• mmc0 = &sdmmc1;
  

• };
• chosen {

• stdout-path = &uart4;
  

• };

+};

+&sdmmc1 {

• u-boot,dm-pre-reloc;

+};

+&sdmmc1_b4_pins_a {

• u-boot,dm-pre-reloc;
• pins1 {

• u-boot,dm-pre-reloc;
  

• };
• pins2 {

• u-boot,dm-pre-reloc;
  

• };

+};

+&uart4 {

• u-boot,dm-pre-reloc;

+};

+&uart4_pins_a {

• u-boot,dm-pre-reloc;
• pins1 {

• u-boot,dm-pre-reloc;
  

• };
• pins2 {

• u-boot,dm-pre-reloc;
  

• bias-pull-up;
  

• };

+}; diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts new file mode 100644 index 0000000000..674b2d330d --- /dev/null +++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/*

• • Copyright (c) STMicroelectronics 2019 - All Rights Reserved
• • Copyright (c) 2020 Engicam srl
• • Copyright (c) 2020 Amarula Solutons(India)
• */

+/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-microgea-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h>

+/ {

• model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame";
• compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",

•      "engicam,microgea-stm32mp1", "st,stm32mp157";
  

• aliases {

• serial0 = &uart4;
  

• serial1 = &uart8;
  

• };
• chosen {

• stdout-path = "serial0:115200n8";
  

• };
• backlight: backlight {

• compatible = "gpio-backlight";
  

• gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
  

• default-on;
  

• };
• lcd_3v3: regulator-lcd-3v3 {

• compatible = "regulator-fixed";
  

• regulator-name = "lcd_3v3";
  

• regulator-min-microvolt = <3300000>;
  

• regulator-max-microvolt = <3300000>;
  

• gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
  

• enable-active-high;
  

• regulator-always-on;
  

• power-supply = <&panel_pwr>;
  

• };
• panel_pwr: regulator-panel-pwr {

• compatible = "regulator-fixed";
  

• regulator-name = "panel_pwr";
  

• regulator-min-microvolt = <3300000>;
  

• regulator-max-microvolt = <3300000>;
  

• gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
  

• regulator-always-on;
  

• };
• panel {

• compatible = "auo,b101aw03";
  

• backlight = <&backlight>;
  

• enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
  

• power-supply = <&lcd_3v3>;
  

• port {
  

• 	panel_in: endpoint {
  

• 		remote-endpoint = <&ltdc_ep0_out>;
  

• 	};
  

• };
  

• };

+};

+&i2c2 {

• i2c-scl-falling-time-ns = <20>;
• i2c-scl-rising-time-ns = <185>;
• pinctrl-names = "default", "sleep";
• pinctrl-0 = <&i2c2_pins_a>;
• pinctrl-1 = <&i2c2_sleep_pins_a>;
• status = "okay";

+};

+&ltdc {

• pinctrl-names = "default";
• pinctrl-0 = <&ltdc_pins>;
• status = "okay";
• port {

• ltdc_ep0_out: endpoint@0 {
  

• 	reg = <0>;
  

• 	remote-endpoint = <&panel_in>;
  

• };
  

• };

+};

+&pinctrl {

• ltdc_pins: ltdc {

• pins {
  

• 	pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
  

• 		 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */
  

• 		 <STM32_PINMUX('H', 11, AF14)>,	/* LTDC_R5 */
  

• 		 <STM32_PINMUX('D', 10, AF14)>,	/* LTDC_B3 */
  

• 		 <STM32_PINMUX('D', 9, AF14)>,	/* LTDC_B0 */
  

• 		 <STM32_PINMUX('E', 5, AF14)>,	/* LTDC_G0 */
  

• 		 <STM32_PINMUX('E', 6, AF14)>,	/* LTDC_G1 */
  

• 		 <STM32_PINMUX('E', 13, AF14)>,	/* LTDC_DE */
  

• 		 <STM32_PINMUX('E', 15, AF14)>,	/* LTDC_R7 */
  

• 		 <STM32_PINMUX('G', 7, AF14)>,	/* LTDC_CLK */
  

• 		 <STM32_PINMUX('G', 12, AF14)>,	/* LTDC_B1 */
  

• 		 <STM32_PINMUX('H', 2, AF14)>,	/* LTDC_R0 */
  

• 		 <STM32_PINMUX('H', 3, AF14)>,	/* LTDC_R1 */
  

• 		 <STM32_PINMUX('H', 8, AF14)>,	/* LTDC_R2 */
  

• 		 <STM32_PINMUX('H', 9, AF14)>,	/* LTDC_R3 */
  

• 		 <STM32_PINMUX('H', 10, AF14)>,	/* LTDC_R4 */
  

• 		 <STM32_PINMUX('H', 13, AF14)>,	/* LTDC_G2 */
  

• 		 <STM32_PINMUX('H', 14, AF14)>,	/* LTDC_G3 */
  

• 		 <STM32_PINMUX('H', 15, AF14)>,	/* LTDC_G4 */
  

• 		 <STM32_PINMUX('I', 0, AF14)>,	/* LTDC_G5 */
  

• 		 <STM32_PINMUX('I', 1, AF14)>,	/* LTDC_G6 */
  

• 		 <STM32_PINMUX('I', 2, AF14)>,	/* LTDC_G7 */
  

• 		 <STM32_PINMUX('I', 4, AF14)>,	/* LTDC_B4 */
  

• 		 <STM32_PINMUX('I', 5, AF14)>,	/* LTDC_B5 */
  

• 		 <STM32_PINMUX('B', 8, AF14)>,	/* LTDC_B6 */
  

• 		 <STM32_PINMUX('I', 7, AF14)>,	/* LTDC_B7 */
  

• 		 <STM32_PINMUX('I', 9, AF14)>,	/* LTDC_VSYNC */
  

• 		 <STM32_PINMUX('I', 10, AF14)>;	/* LTDC_HSYNC */
  

• 	bias-disable;
  

• 	drive-push-pull;
  

• 	slew-rate = <3>;
  

• };
  

• };

+};

+&sdmmc1 {

• bus-width = <4>;
• disable-wp;
• pinctrl-names = "default", "opendrain", "sleep";
• pinctrl-0 = <&sdmmc1_b4_pins_a>;
• pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
• pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
• st,neg-edge;
• vmmc-supply = <&vdd>;
• status = "okay";

+};

+&uart4 {

• pinctrl-names = "default", "sleep", "idle";
• pinctrl-0 = <&uart4_pins_a>;
• pinctrl-1 = <&uart4_sleep_pins_a>;
• pinctrl-2 = <&uart4_idle_pins_a>;
• status = "okay";

+};

+/* J31: RS323 */ +&uart8 {

• pinctrl-names = "default";
• pinctrl-0 = <&uart8_pins_a>;
• status = "okay";

+}; diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index c1622df7f3..c22b132ac1 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -97,6 +97,13 @@ config TARGET_MICROGEA_STM32MP1 * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

•  MicroGEA STM32MP1 MicroDev 2.0 7" OF:
  

•  * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
  

•    panel and toucscreen.
  

•  * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
  

•    pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
  

•    Open Frame Solution board.
  

config TARGET_ICORE_STM32MP1 bool "Engicam i.Core STM32MP1 SOM" select STM32MP15x diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS index c0bb767782..712e312665 100644 --- a/board/engicam/stm32mp1/MAINTAINERS +++ b/board/engicam/stm32mp1/MAINTAINERS @@ -4,6 +4,12 @@ M: Matteo Lisi matteo.lisi@engicam.com S: Maintained F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig

+MicroGEA-STM32MP1-MICRODEV2.0-OF7 +M: Jagan Teki jagan@amarulasolutions.com +M: Matteo Lisi matteo.lisi@engicam.com +S: Maintained +F: configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig

i.Core-STM32MP1-CTOUCH2.0 M: Jagan Teki jagan@amarulasolutions.com M: Matteo Lisi matteo.lisi@engicam.com diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig new file mode 100644 index 0000000000..96f52fca55 --- /dev/null +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -0,0 +1,80 @@ +CONFIG_ARM=y +CONFIG_ARCH_STM32MP=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_SYS_MEMTEST_START=0xc0000000 +CONFIG_SYS_MEMTEST_END=0xc4000000 +CONFIG_ENV_OFFSET=0x280000 +CONFIG_SPL_TEXT_BASE=0x2FFC2500 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL=y +CONFIG_TARGET_MICROGEA_STM32MP1=y +CONFIG_ENV_OFFSET_REDUND=0x2C0000 +# CONFIG_ARMV7_VIRT is not set +CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0-of7" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_CMD_ADTIMG=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_ADC=y +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_REMOTEPROC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_DM_HWSPINLOCK=y +CONFIG_HWSPINLOCK_STM32=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_STM32F7=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_DM_MAILBOX=y +CONFIG_STM32_IPCC=y +CONFIG_STM32_FMC2_EBI=y +CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_STM32_SDMMC2=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DWC_ETH_QOS=y +CONFIG_PHY=y +CONFIG_PINCONF=y +# CONFIG_SPL_PINCTRL_FULL is not set +CONFIG_PINCTRL_STMFX=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_PMIC_STPMIC1=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_REMOTEPROC_STM32_COPRO=y +CONFIG_DM_RTC=y +CONFIG_RTC_STM32=y +CONFIG_SERIAL_RX_BUFFER=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y

Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice