
On 2024/6/12 22:40, Quentin Schulz wrote:
From: Quentin Schulz quentin.schulz@cherry.de
RK3588 Jaguar and Tiger, and RK3399 Puma use standard boot with the full feature set, so let's do that as well for PX30 Ringneck.
Disable support for unused OSes as Linux is the primary target.
Enable a bunch of commands:
- boot/bootd
- erofs
- gpio
- iminfo
- imxtract
- itest
- pmic
- regulator
- sleep
- squashfs
that could be useful and are also found in Jaguar and Tiger defconfigs.
Signed-off-by: Quentin Schulz quentin.schulz@cherry.de
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
configs/ringneck-px30_defconfig | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index dedf35d4347..a0c1fec0951 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -20,6 +20,7 @@ CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_BOOTSTD_FULL=y CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -34,12 +35,15 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set # CONFIG_TPL_SYS_MALLOC_SIMPLE is not set -# CONFIG_CMD_BOOTD is not set +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_CMD_VBE is not set +# CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -47,9 +51,11 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_SLEEP is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EROFS=y +CONFIG_CMD_SQUASHFS=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_ISO_PARTITION is not set CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64