Re: [U-Boot] [PATCH 2/2] mx6cuboxi: Make Ethernet functional

On Mon, Jan 4, 2016 at 9:11 PM, Troy Kisky troy.kisky@boundarydevices.com wrote:

Try adding a delay after releasing reset

    mdelay(2);
    gpio_set_value(ETH_PHY_RESET, 1);
    udelay(100);

Perhaps the first time it didn't read 4dd072

That works :-)

Here is a minimal fix:

--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -143,8 +143,9 @@ static void setup_iomux_enet(void) SETUP_IOMUX_PADS(enet_pads);

gpio_direction_output(ETH_PHY_RESET, 0); - mdelay(2); + mdelay(10); gpio_set_value(ETH_PHY_RESET, 1); + udelay(100); }

Will send a formal patch shortly.

Thanks for your help, Troy!