This series is mainly designed to move the macb Ethernet to driver model, along with the LCD controller. It also includes a few fixes:
- NAND with ECC doesn't build properly - The instruction cache is off by default - Ethernet macb doesn't send packets when the cache is enabled
A Snapper 9G45-based board is used for this work. It includes an AT91SAM9G45 CPU so is a good test of driver model on this chip.
Simon Glass (18): at91: Add support for the AT91 slow clock controller arm: Allow skipping of low-level init with I-cache on bootm: Align cache flush end address correctly net: Handle an empty bootp extension section net: macb: Prepare for driver-model conversion net: macb: Flush correct cache portion when sending net: macb: Convert to driver model arm: at91: dts: Bring in device tree file for AT91SAM9G45 arm: at91: Add a header file for the real-time clock at91: Correct NAND ECC register access at91: nand: Set up the ECC strength correctly mtd: nand: Drop a blank line in nand_wait() at91: Add driver-model GPIO devices for AT91SAM9G45 at91: mtd: nand: Add dev_warn() to correct build error in driver at91: video: Prepare for driver-model conversion at91: video: Support driver-model for the LCD driver fdt: Correct return value in fdtdec_decode_display_timing() arm: at91: Add support for gurnard
README | 5 + arch/arm/cpu/arm1136/start.S | 2 + arch/arm/cpu/arm920t/start.S | 3 +- arch/arm/cpu/arm926ejs/start.S | 2 + arch/arm/cpu/arm946es/start.S | 2 + arch/arm/cpu/armv7/start.S | 5 +- arch/arm/cpu/sa1100/start.S | 2 + arch/arm/dts/Makefile | 1 + arch/arm/dts/at91sam9g45-gurnard.dts | 157 ++ arch/arm/dts/at91sam9g45.dtsi | 1335 ++++++++++ arch/arm/mach-at91/Kconfig | 9 + .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 18 + arch/arm/mach-at91/include/mach/at91_rtc.h | 71 + arch/arm/mach-at91/include/mach/at91_sck.h | 21 + arch/arm/mach-at91/include/mach/at91sam9g45.h | 1 + board/bluewater/gurnard/Kconfig | 12 + board/bluewater/gurnard/MAINTAINERS | 6 + board/bluewater/gurnard/Makefile | 11 + board/bluewater/gurnard/gurnard.c | 449 ++++ board/bluewater/gurnard/splash_logo.h | 2619 ++++++++++++++++++++ common/bootm.c | 2 +- configs/gurnard_defconfig | 19 + drivers/mtd/nand/atmel_nand.c | 7 +- drivers/mtd/nand/nand_base.c | 1 - drivers/net/macb.c | 320 ++- drivers/video/atmel_lcdfb.c | 197 +- include/atmel_lcd.h | 9 + include/configs/snapper9g45.h | 156 ++ include/dt-bindings/clock/at91.h | 23 + include/dt-bindings/dma/at91.h | 52 + include/dt-bindings/pinctrl/at91.h | 40 + lib/fdtdec.c | 2 +- net/bootp.c | 9 + 33 files changed, 5449 insertions(+), 119 deletions(-) create mode 100644 arch/arm/dts/at91sam9g45-gurnard.dts create mode 100644 arch/arm/dts/at91sam9g45.dtsi create mode 100644 arch/arm/mach-at91/include/mach/at91_rtc.h create mode 100644 arch/arm/mach-at91/include/mach/at91_sck.h create mode 100644 board/bluewater/gurnard/Kconfig create mode 100644 board/bluewater/gurnard/MAINTAINERS create mode 100644 board/bluewater/gurnard/Makefile create mode 100644 board/bluewater/gurnard/gurnard.c create mode 100644 board/bluewater/gurnard/splash_logo.h create mode 100644 configs/gurnard_defconfig create mode 100644 include/configs/snapper9g45.h create mode 100644 include/dt-bindings/clock/at91.h create mode 100644 include/dt-bindings/dma/at91.h create mode 100644 include/dt-bindings/pinctrl/at91.h