To fix the timeout of sending the write command, enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v2: - Add missed this quirk in atmel_sdhci_init().
drivers/mmc/atmel_sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c index 852255782f..86e36a9c28 100644 --- a/drivers/mmc/atmel_sdhci.c +++ b/drivers/mmc/atmel_sdhci.c @@ -28,7 +28,7 @@ int atmel_sdhci_init(void *regbase, u32 id)
host->name = "atmel_sdhci"; host->ioaddr = regbase; - host->quirks = 0; + host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; max_clk = at91_get_periph_generated_clk(id); if (!max_clk) { printf("%s: Failed to get the proper clock\n", __func__); @@ -74,7 +74,7 @@ static int atmel_sdhci_probe(struct udevice *dev) host->name = dev->name; host->ioaddr = (void *)dev_get_addr(dev);
- host->quirks = 0; + host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width", 4);