This series migrate MiQi to use OF_UPSTREAM, ensure devices and pinctrl is included in xPL control FDT, set ethaddr based on cpuid and finally change to use FIT with checksum validation.
I do not have a MiQi board and have only done limited runtime test, with adjusted sdram props, on a Tinker Board.
This series have a loose dependancy on the "rockchip: rk3288-tinker: Migrate to OF_UPSTREAM" series. Specifically that series change to SYS_MALLOC_F_LEN and TPL variant in Kconfig.
Jonas Karlman (11): rockchip: rk3288-miqi: Sort u-boot.dtsi nodes alphabetically rockchip: rk3288-miqi: Remove unused work led node from xPL rockchip: rk3288-miqi: Set ethaddr env based on cpuid rockchip: rk3288-miqi: Use TPL with common bss and stack addresses rockchip: rk3288-miqi: Include required DT nodes in xPL rockchip: rk3288-miqi: Include sdmmc regulator in SPL rockchip: rk3288-miqi: Drop use of silent console and late boardinfo rockchip: rk3288-miqi: Drop USE_PREBOOT Kconfig option rockchip: rk3288-miqi: Migrate to OF_UPSTREAM rockchip: rk3288-miqi: Fix slow Ethernet initializion rockchip: rk3288-miqi: Change to use FIT
arch/arm/dts/Makefile | 1 - arch/arm/dts/rk3288-miqi-u-boot.dtsi | 83 ++++- arch/arm/dts/rk3288-miqi.dts | 16 - arch/arm/dts/rk3288-miqi.dtsi | 417 -------------------------- arch/arm/mach-rockchip/rk3288/Kconfig | 2 + board/mqmaker/miqi_rk3288/MAINTAINERS | 1 - configs/miqi-rk3288_defconfig | 43 +-- 7 files changed, 93 insertions(+), 470 deletions(-) delete mode 100644 arch/arm/dts/rk3288-miqi.dts delete mode 100644 arch/arm/dts/rk3288-miqi.dtsi